netdev - [PATCH net-next v5 0/1] Add support of ECMPv6

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1349099807-3907-1-git-send-email-nicolas.dichtel@6wind.com>
Date:	Mon,  1 Oct 2012 15:56:46 +0200
From:	Nicolas Dichtel <nicolas.dichtel@...nd.com>
To:	davem@...emloft.net
Cc:	bernat@...fy.cx, netdev@...r.kernel.org, yoshfuji@...ux-ipv6.org
Subject: [PATCH net-next v5 0/1] Add support of ECMPv6

Here is a proposal to add the support of ECMPv6. The previous patch
from Vincent against iproute2 can be used, but a little other patch is needed
too, see http://patchwork.ozlabs.org/patch/183277/

If the kernel patch is approved, I can submit formally the patch for
iproute2.

Here is an example of a command to add an ECMP route:
$ ip -6 route add 3ffe:304:124:2306::/64 \
	nexthop via fe80::230:1bff:feb4:e05c dev eth0 \
	nexthop via fe80::230:1bff:feb4:dd4f dev eth0

But note that this command is a shortcut and previous patches are not
mandatory to set ECMP routes. The following commands can be used too:
$ ip -6 route add 3ffe:304:124:2306::/64 via fe80::230:1bff:feb4:dd4f dev
eth0
$ ip -6 route append 3ffe:304:124:2306::/64 via fe80::230:1bff:feb4:e05c dev
eth0

Here is an example of a dump:
$ ip -6 route | grep 3ffe:304:124:2306::/64
3ffe:304:124:2306::/64 via fe80::230:1bff:feb4:dd4f dev eth0  metric 1024
3ffe:304:124:2306::/64 via fe80::230:1bff:feb4:e05c dev eth0  metric 1024

v5: to minimize the patch and ease its integration, remove roundrobin and random
    algorithms for route selection. It will be possible to add new algorithms
    through rt6_info_hashfn() when the basic support of ECMP is integrated.

v4: remove compilation options to choose multipath algorithm for next hop
    selection. Now the choice can be done at run time via
    /proc/sys/net/ipv6/route/multipath_algorithm

v3: rebase after updating net-next

v2: rename CONFIG_IPV6_MULTIPATH_ROUTE to CONFIG_IPV6_MULTIPATH_HASH
    use flowlabel in the hash function
    add reference to RFC
    fix a small identation issue
    remove "If unsure, say N." from the help of CONFIG_IPV6_MULTIPATH

Comments are welcome.

Regards,
Nicolas

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html