| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1350647114-6768-15-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Fri, 19 Oct 2012 04:45:14 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Alexander Duyck <alexander.h.duyck@...el.com>,
netdev@...r.kernel.org, gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 14/14] igb: Split igb_update_dca into separate Tx and Rx functions
From: Alexander Duyck <alexander.h.duyck@...el.com>
This change makes it so that igb_update_dca is broken into two halves, one
for Rx and one for Tx. The advantage to this is primarily readability.
In addition I am enabling relaxed ordering for reads from hardware since
this is supported on all of the igb parts.
Signed-off-by: Alexander Duyck <alexander.h.duyck@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.h | 3 ++
drivers/net/ethernet/intel/igb/igb_main.c | 80 +++++++++++++++++-----------
2 files changed, 52 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index e85c453..44b76b3 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -172,10 +172,13 @@ struct e1000_adv_tx_context_desc {
#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */
#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */
/* Additional DCA related definitions, note change in position of CPUID */
#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index e7b1027..87abb57 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4851,45 +4851,63 @@ static irqreturn_t igb_msix_ring(int irq, void *data)
}
#ifdef CONFIG_IGB_DCA
+static void igb_update_tx_dca(struct igb_adapter *adapter,
+ struct igb_ring *tx_ring,
+ int cpu)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 txctrl = dca3_get_tag(tx_ring->dev, cpu);
+
+ if (hw->mac.type != e1000_82575)
+ txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT;
+
+ /*
+ * We can enable relaxed ordering for reads, but not writes when
+ * DCA is enabled. This is due to a known issue in some chipsets
+ * which will cause the DCA tag to be cleared.
+ */
+ txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN |
+ E1000_DCA_TXCTRL_DATA_RRO_EN |
+ E1000_DCA_TXCTRL_DESC_DCA_EN;
+
+ wr32(E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl);
+}
+
+static void igb_update_rx_dca(struct igb_adapter *adapter,
+ struct igb_ring *rx_ring,
+ int cpu)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu);
+
+ if (hw->mac.type != e1000_82575)
+ rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT;
+
+ /*
+ * We can enable relaxed ordering for reads, but not writes when
+ * DCA is enabled. This is due to a known issue in some chipsets
+ * which will cause the DCA tag to be cleared.
+ */
+ rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN |
+ E1000_DCA_RXCTRL_DESC_DCA_EN;
+
+ wr32(E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl);
+}
+
static void igb_update_dca(struct igb_q_vector *q_vector)
{
struct igb_adapter *adapter = q_vector->adapter;
- struct e1000_hw *hw = &adapter->hw;
int cpu = get_cpu();
if (q_vector->cpu == cpu)
goto out_no_update;
- if (q_vector->tx.ring) {
- int q = q_vector->tx.ring->reg_idx;
- u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
- if (hw->mac.type == e1000_82575) {
- dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
- dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
- } else {
- dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
- dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
- E1000_DCA_TXCTRL_CPUID_SHIFT;
- }
- dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
- wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
- }
- if (q_vector->rx.ring) {
- int q = q_vector->rx.ring->reg_idx;
- u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
- if (hw->mac.type == e1000_82575) {
- dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
- dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
- } else {
- dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
- dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
- E1000_DCA_RXCTRL_CPUID_SHIFT;
- }
- dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
- dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
- dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
- wr32(E1000_DCA_RXCTRL(q), dca_rxctrl);
- }
+ if (q_vector->tx.ring)
+ igb_update_tx_dca(adapter, q_vector->tx.ring, cpu);
+
+ if (q_vector->rx.ring)
+ igb_update_rx_dca(adapter, q_vector->rx.ring, cpu);
+
q_vector->cpu = cpu;
out_no_update:
put_cpu();
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists