netdev - [net-next 11/13] ixgbe: Add function ixgbe_reset_pipeline

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 19 Oct 2012 23:26:05 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Don Skidmore <donald.c.skidmore@...el.com>, netdev@...r.kernel.org,
	gospo@...hat.com, sassmann@...hat.com,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 11/13] ixgbe: Add function ixgbe_reset_pipeline_82599

From: Don Skidmore <donald.c.skidmore@...el.com>

This patch adds a function that forces a full pipeline reset.  This
function will be used in following patches to completely reset the PHY
during resets.

Signed-off-by: Don Skidmore <donald.c.skidmore@...el.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c  | 44 +++++++++++++++++++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.h |  1 +
 2 files changed, 45 insertions(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 1077cb2..b527813 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -2080,6 +2080,50 @@ static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
 	return ret_val;
 }
 
+/**
+ * ixgbe_reset_pipeline_82599 - perform pipeline reset
+ *
+ * @hw: pointer to hardware structure
+ *
+ * Reset pipeline by asserting Restart_AN together with LMS change to ensure
+ * full pipeline reset.  Note - We must hold the SW/FW semaphore before writing
+ * to AUTOC, so this function assumes the semaphore is held.
+ **/
+s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
+{
+	s32 i, autoc_reg, ret_val;
+	s32 anlp1_reg = 0;
+
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+
+	/* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg ^ IXGBE_AUTOC_LMS_1G_AN);
+
+	/* Wait for AN to leave state 0 */
+	for (i = 0; i < 10; i++) {
+		usleep_range(4000, 8000);
+		anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+		if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)
+			break;
+	}
+
+	if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) {
+		hw_dbg(hw, "auto negotiation not completed\n");
+		ret_val = IXGBE_ERR_RESET_FAILED;
+		goto reset_pipeline_out;
+	}
+
+	ret_val = 0;
+
+reset_pipeline_out:
+	/* Write AUTOC register with original LMS field and Restart_AN */
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return ret_val;
+}
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index d813d11..587db47 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -107,6 +107,7 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
 
 void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
 			     u32 headroom, int strategy);
+s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
 
 #define IXGBE_I2C_THERMAL_SENSOR_ADDR	0xF8
 #define IXGBE_EMC_INTERNAL_DATA		0x00
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html