netdev - Re: EG20T and Micrel KSZ9021 Gigabit Ethernet

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <5089A68A.5000206@intcomgrp.com>
Date:	Thu, 25 Oct 2012 16:52:26 -0400
From:	James Kosin <jkosin@...comgrp.com>
To:	Veaceslav Falico <darkmag@...il.com>
CC:	Francois Romieu <romieu@...zoreil.com>, <netdev@...r.kernel.org>
Subject: Re: EG20T and Micrel KSZ9021 Gigabit Ethernet


On 10/25/2012 4:49 PM, Veaceslav Falico wrote:
> On Thu, Oct 25, 2012 at 10:30 PM, James Kosin <jkosin@...comgrp.com> wrote:
>> On 10/16/2012 1:13 PM, James Kosin wrote:
>>> Hmmm... interesting turn of events.
>>>
>>> The problem seems to be in 10 speed support.  I hooked the Ethernet
>>> PHY to a100TX port and don't get these errors.
>>>
>>> James
>>>
>>> On 10/5/2012 5:09 PM, Francois Romieu wrote:
>>>> (please don't top post)
>>>>
>>>> James Kosin <jkosin@...comgrp.com> :
>>>>> The driver is always reporting:
>>>>>     [...] pch_gbe: Transfer Carrier Sense Error
>>>> You should send more information. Say dmesg, link stats (ip link),
>>>> ethtool information, stats and offload settings.
>>>>
>>>> We have a small Micrel ksz9021 phy driver that the pch_gbe driver does
>>>> not use and the latter pokes into some phy specific register (0x10) that
>>>> the Micrel document does not include in its list of vendor registers...
>>>>
>>>> Does your motherboard vendor offer some linux driver ?
>>>>
>>>> /note to myself: pch_gbe should use standard mii.h registers instead
>>>> of defining its own redundant set of registers.
>>>>
>>>> --
>>>> Ueimor
>>>>
>> Ueimor & All,
>>
>> The "Transfer Carrier Sense Error" seems to have been hardware related.
>> I replaced with a 10/100Mbps device and the interface is working
>> correctly now.  My hardware engineer is going to look at the 10Mbps HUB
>> later to find out what is going on with that piece of equipment; so, we
>> know what to do when we have future issues.
> Did you run pch_gbe on 1gbps? It might be also speed related, in my tests
> the driver gave CRC errors only on high loads.
>
>> James
I'm not planning on using 1Gbps ... we plan on limiting this by only
advertising and attaching the connections needed for 10/100Mbps support.


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html