| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 26 Oct 2012 04:58:12 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Emil Tantilov <emil.s.tantilov@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 04/14] ixgbe: clean up the condition for turning on/off the laser
From: Emil Tantilov <emil.s.tantilov@...el.com>
This patch simplifies the check for calling en/disable_tx_laser() function
pointer. The pointer is only set on parts that can use it.
Signed-off-by: Emil Tantilov <emil.s.tantilov@...el.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 31 +++++++--------------------
1 file changed, 8 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 97bab45..ceab142 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4087,11 +4087,8 @@ static void ixgbe_up_complete(struct ixgbe_adapter *adapter)
else
ixgbe_configure_msi_and_legacy(adapter);
- /* enable the optics for both mult-speed fiber and 82599 SFP+ fiber */
- if (hw->mac.ops.enable_tx_laser &&
- ((hw->phy.multispeed_fiber) ||
- ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
- (hw->mac.type == ixgbe_mac_82599EB))))
+ /* enable the optics for 82599 SFP+ fiber */
+ if (hw->mac.ops.enable_tx_laser)
hw->mac.ops.enable_tx_laser(hw);
clear_bit(__IXGBE_DOWN, &adapter->state);
@@ -4413,11 +4410,8 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
if (!pci_channel_offline(adapter->pdev))
ixgbe_reset(adapter);
- /* power down the optics for multispeed fiber and 82599 SFP+ fiber */
- if (hw->mac.ops.disable_tx_laser &&
- ((hw->phy.multispeed_fiber) ||
- ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
- (hw->mac.type == ixgbe_mac_82599EB))))
+ /* power down the optics for 82599 SFP+ fiber */
+ if (hw->mac.ops.disable_tx_laser)
hw->mac.ops.disable_tx_laser(hw);
ixgbe_clean_all_tx_rings(adapter);
@@ -5050,14 +5044,8 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
if (wufc) {
ixgbe_set_rx_mode(netdev);
- /*
- * enable the optics for both mult-speed fiber and
- * 82599 SFP+ fiber as we can WoL.
- */
- if (hw->mac.ops.enable_tx_laser &&
- (hw->phy.multispeed_fiber ||
- (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber &&
- hw->mac.type == ixgbe_mac_82599EB)))
+ /* enable the optics for 82599 SFP+ fiber as we can WoL */
+ if (hw->mac.ops.enable_tx_laser)
hw->mac.ops.enable_tx_laser(hw);
/* turn on all-multi mode if wake on multicast is enabled */
@@ -7468,11 +7456,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
if (err)
goto err_register;
- /* power down the optics for multispeed fiber and 82599 SFP+ fiber */
- if (hw->mac.ops.disable_tx_laser &&
- ((hw->phy.multispeed_fiber) ||
- ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
- (hw->mac.type == ixgbe_mac_82599EB))))
+ /* power down the optics for 82599 SFP+ fiber */
+ if (hw->mac.ops.disable_tx_laser)
hw->mac.ops.disable_tx_laser(hw);
/* carrier off reporting is important to ethtool even BEFORE open */
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists