| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <daba421bfcef21b5fcc58ae0ce5e19e799ca9fe9.1351411047.git.joe@perches.com>
Date: Sun, 28 Oct 2012 01:05:47 -0700
From: Joe Perches <joe@...ches.com>
To: "John W. Linville" <linville@...driver.com>,
Stanislaw Gruszka <sgruszka@...hat.com>
Cc: Johannes Berg <johannes.berg@...el.com>,
Wey-Yi Guy <wey-yi.w.guy@...el.com>,
Intel Linux Wireless <ilw@...ux.intel.com>,
linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 09/16] wireless: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
dev_<level> calls take less code than dev_printk(KERN_<LEVEL>
and reducing object size is good.
Coalesce formats for easier grep.
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/wireless/at76c50x-usb.c | 85 ++++++++++++++---------------
drivers/net/wireless/iwlegacy/common.h | 5 +-
drivers/net/wireless/iwlwifi/pcie/trans.c | 28 ++++------
3 files changed, 52 insertions(+), 66 deletions(-)
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 99b9ddf..77fa428 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -379,7 +379,7 @@ static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
manifest_sync_timeout);
if (!size) {
- dev_printk(KERN_ERR, &udev->dev, "FW buffer length invalid!\n");
+ dev_err(&udev->dev, "FW buffer length invalid!\n");
return -EINVAL;
}
@@ -391,8 +391,8 @@ static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
if (need_dfu_state) {
ret = at76_dfu_get_state(udev, &dfu_state);
if (ret < 0) {
- dev_printk(KERN_ERR, &udev->dev,
- "cannot get DFU state: %d\n", ret);
+ dev_err(&udev->dev,
+ "cannot get DFU state: %d\n", ret);
goto exit;
}
need_dfu_state = 0;
@@ -407,9 +407,9 @@ static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
dfu_timeout = at76_get_timeout(&dfu_stat_buf);
need_dfu_state = 0;
} else
- dev_printk(KERN_ERR, &udev->dev,
- "at76_dfu_get_status returned %d\n",
- ret);
+ dev_err(&udev->dev,
+ "at76_dfu_get_status returned %d\n",
+ ret);
break;
case STATE_DFU_DOWNLOAD_BUSY:
@@ -438,9 +438,9 @@ static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
blockno++;
if (ret != bsize)
- dev_printk(KERN_ERR, &udev->dev,
- "at76_load_int_fw_block "
- "returned %d\n", ret);
+ dev_err(&udev->dev,
+ "at76_load_int_fw_block returned %d\n",
+ ret);
need_dfu_state = 1;
break;
@@ -1255,8 +1255,7 @@ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
- dev_printk(KERN_ERR, &udev->dev, "unexpected opmode %d\n",
- op_mode);
+ dev_err(&udev->dev, "unexpected opmode %d\n", op_mode);
return -EINVAL;
}
@@ -1275,9 +1274,9 @@ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
size, bsize, blockno);
ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
if (ret != bsize) {
- dev_printk(KERN_ERR, &udev->dev,
- "loading %dth firmware block failed: %d\n",
- blockno, ret);
+ dev_err(&udev->dev,
+ "loading %dth firmware block failed: %d\n",
+ blockno, ret);
goto exit;
}
buf += bsize;
@@ -1293,8 +1292,8 @@ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
exit:
kfree(block);
if (ret < 0)
- dev_printk(KERN_ERR, &udev->dev,
- "downloading external firmware failed: %d\n", ret);
+ dev_err(&udev->dev,
+ "downloading external firmware failed: %d\n", ret);
return ret;
}
@@ -1308,8 +1307,8 @@ static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
need_remap ? 0 : 2 * HZ);
if (ret < 0) {
- dev_printk(KERN_ERR, &udev->dev,
- "downloading internal fw failed with %d\n", ret);
+ dev_err(&udev->dev,
+ "downloading internal fw failed with %d\n", ret);
goto exit;
}
@@ -1319,8 +1318,8 @@ static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
if (need_remap) {
ret = at76_remap(udev);
if (ret < 0) {
- dev_printk(KERN_ERR, &udev->dev,
- "sending REMAP failed with %d\n", ret);
+ dev_err(&udev->dev,
+ "sending REMAP failed with %d\n", ret);
goto exit;
}
}
@@ -1555,11 +1554,10 @@ static struct fwentry *at76_load_firmware(struct usb_device *udev,
at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
if (ret < 0) {
- dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n",
- fwe->fwname);
- dev_printk(KERN_ERR, &udev->dev,
- "you may need to download the firmware from "
- "http://developer.berlios.de/projects/at76c503a/\n");
+ dev_err(&udev->dev, "firmware %s not found!\n",
+ fwe->fwname);
+ dev_err(&udev->dev,
+ "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n");
goto exit;
}
@@ -1567,17 +1565,17 @@ static struct fwentry *at76_load_firmware(struct usb_device *udev,
fwh = (struct at76_fw_header *)(fwe->fw->data);
if (fwe->fw->size <= sizeof(*fwh)) {
- dev_printk(KERN_ERR, &udev->dev,
- "firmware is too short (0x%zx)\n", fwe->fw->size);
+ dev_err(&udev->dev,
+ "firmware is too short (0x%zx)\n", fwe->fw->size);
goto exit;
}
/* CRC currently not checked */
fwe->board_type = le32_to_cpu(fwh->board_type);
if (fwe->board_type != board_type) {
- dev_printk(KERN_ERR, &udev->dev,
- "board type mismatch, requested %u, got %u\n",
- board_type, fwe->board_type);
+ dev_err(&udev->dev,
+ "board type mismatch, requested %u, got %u\n",
+ board_type, fwe->board_type);
goto exit;
}
@@ -2150,8 +2148,7 @@ static int at76_alloc_urbs(struct at76_priv *priv,
}
if (!ep_in || !ep_out) {
- dev_printk(KERN_ERR, &interface->dev,
- "bulk endpoints missing\n");
+ dev_err(&interface->dev, "bulk endpoints missing\n");
return -ENXIO;
}
@@ -2161,15 +2158,14 @@ static int at76_alloc_urbs(struct at76_priv *priv,
priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!priv->rx_urb || !priv->tx_urb) {
- dev_printk(KERN_ERR, &interface->dev, "cannot allocate URB\n");
+ dev_err(&interface->dev, "cannot allocate URB\n");
return -ENOMEM;
}
buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!priv->bulk_out_buffer) {
- dev_printk(KERN_ERR, &interface->dev,
- "cannot allocate output buffer\n");
+ dev_err(&interface->dev, "cannot allocate output buffer\n");
return -ENOMEM;
}
@@ -2230,8 +2226,7 @@ static int at76_init_new_device(struct at76_priv *priv,
/* MAC address */
ret = at76_get_hw_config(priv);
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "cannot get MAC address\n");
+ dev_err(&interface->dev, "cannot get MAC address\n");
goto exit;
}
@@ -2358,8 +2353,8 @@ static int at76_probe(struct usb_interface *interface,
we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
if (op_mode == OPMODE_HW_CONFIG_MODE) {
- dev_printk(KERN_ERR, &interface->dev,
- "cannot handle a device in HW_CONFIG_MODE\n");
+ dev_err(&interface->dev,
+ "cannot handle a device in HW_CONFIG_MODE\n");
ret = -EBUSY;
goto error;
}
@@ -2371,9 +2366,9 @@ static int at76_probe(struct usb_interface *interface,
"downloading internal firmware\n");
ret = at76_load_internal_fw(udev, fwe);
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "error %d downloading internal firmware\n",
- ret);
+ dev_err(&interface->dev,
+ "error %d downloading internal firmware\n",
+ ret);
goto error;
}
usb_put_dev(udev);
@@ -2408,8 +2403,8 @@ static int at76_probe(struct usb_interface *interface,
/* Re-check firmware version */
ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
if (ret < 0) {
- dev_printk(KERN_ERR, &interface->dev,
- "error %d getting firmware version\n", ret);
+ dev_err(&interface->dev,
+ "error %d getting firmware version\n", ret);
goto error;
}
}
@@ -2449,7 +2444,7 @@ static void at76_disconnect(struct usb_interface *interface)
wiphy_info(priv->hw->wiphy, "disconnecting\n");
at76_delete_device(priv);
- dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
+ dev_info(&interface->dev, "disconnected\n");
}
/* Structure for registering this driver with the USB subsystem */
diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index b4bb813..e254cba 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -2919,9 +2919,8 @@ do { \
#define IL_DBG(level, fmt, args...) \
do { \
if (il_get_debug_level(il) & level) \
- dev_printk(KERN_ERR, &il->hw->wiphy->dev, \
- "%c %s " fmt, in_interrupt() ? 'I' : 'U', \
- __func__ , ## args); \
+ dev_err(&il->hw->wiphy->dev, "%c %s " fmt, \
+ in_interrupt() ? 'I' : 'U', __func__ , ##args); \
} while (0)
#define il_print_hex_dump(il, level, p, len) \
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index f95d88d..4d9dfa7 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -699,13 +699,11 @@ static void iwl_apm_config(struct iwl_trans *trans)
PCI_CFG_LINK_CTRL_VAL_L1_EN) {
/* L1-ASPM enabled; disable(!) L0S */
iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_printk(KERN_INFO, trans->dev,
- "L1 Enabled; Disabling L0S\n");
+ dev_info(trans->dev, "L1 Enabled; Disabling L0S\n");
} else {
/* L1-ASPM disabled; enable(!) L0S */
iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_printk(KERN_INFO, trans->dev,
- "L1 Disabled; Enabling L0S\n");
+ dev_info(trans->dev, "L1 Disabled; Enabling L0S\n");
}
trans->pm_support = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
}
@@ -2150,34 +2148,29 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
DMA_BIT_MASK(32));
/* both attempts failed: */
if (err) {
- dev_printk(KERN_ERR, &pdev->dev,
- "No suitable DMA available.\n");
+ dev_err(&pdev->dev, "No suitable DMA available\n");
goto out_pci_disable_device;
}
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
- dev_printk(KERN_ERR, &pdev->dev,
- "pci_request_regions failed\n");
+ dev_err(&pdev->dev, "pci_request_regions failed\n");
goto out_pci_disable_device;
}
trans_pcie->hw_base = pci_ioremap_bar(pdev, 0);
if (!trans_pcie->hw_base) {
- dev_printk(KERN_ERR, &pdev->dev, "pci_ioremap_bar failed\n");
+ dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
err = -ENODEV;
goto out_pci_release_regions;
}
- dev_printk(KERN_INFO, &pdev->dev,
- "pci_resource_len = 0x%08llx\n",
- (unsigned long long) pci_resource_len(pdev, 0));
- dev_printk(KERN_INFO, &pdev->dev,
- "pci_resource_base = %p\n", trans_pcie->hw_base);
+ dev_info(&pdev->dev, "pci_resource_len = 0x%08llx\n",
+ (unsigned long long) pci_resource_len(pdev, 0));
+ dev_info(&pdev->dev, "pci_resource_base = %p\n", trans_pcie->hw_base);
- dev_printk(KERN_INFO, &pdev->dev,
- "HW Revision ID = 0x%X\n", pdev->revision);
+ dev_info(&pdev->dev, "HW Revision ID = 0x%X\n", pdev->revision);
/* We disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state */
@@ -2185,8 +2178,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
err = pci_enable_msi(pdev);
if (err)
- dev_printk(KERN_ERR, &pdev->dev,
- "pci_enable_msi failed(0X%x)\n", err);
+ dev_err(&pdev->dev, "pci_enable_msi failed(0X%x)\n", err);
trans->dev = &pdev->dev;
trans_pcie->irq = pdev->irq;
--
1.7.8.112.g3fd21
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists