[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <7b4847b9e4ff65a26f9291276b85a583d51addd4.1351535539.git.richardcochran@gmail.com>
Date: Mon, 29 Oct 2012 19:45:15 +0100
From: Richard Cochran <richardcochran@...il.com>
To: <netdev@...r.kernel.org>
Cc: <linux-arm-kernel@...ts.infradead.org>,
David Miller <davem@...emloft.net>,
Cyril Chemparathy <cyril@...com>,
Mugunthan V N <mugunthanvnm@...com>
Subject: [PATCH net-next V3 05/10] cpsw: support both silicon versions
This patch fixes the cpsw driver to operate correctly with both the
dm814x and the am335x versions of the switch hardware.
Signed-off-by: Richard Cochran <richardcochran@...il.com>
---
Documentation/devicetree/bindings/net/cpsw.txt | 8 +-
drivers/net/ethernet/ti/cpsw.c | 106 ++++++++++++++++++++----
2 files changed, 94 insertions(+), 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index dcaabe9..3af47b7 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -59,14 +59,14 @@ Examples:
mac_control = <0x20>;
slaves = <2>;
cpsw_emac0: slave@0 {
- slave_reg_ofs = <0x208>;
+ slave_reg_ofs = <0x200>;
sliver_reg_ofs = <0xd80>;
phy_id = "davinci_mdio.16:00";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
cpsw_emac1: slave@1 {
- slave_reg_ofs = <0x308>;
+ slave_reg_ofs = <0x300>;
sliver_reg_ofs = <0xdc0>;
phy_id = "davinci_mdio.16:01";
/* Filled in by U-Boot */
@@ -93,14 +93,14 @@ Examples:
mac_control = <0x20>;
slaves = <2>;
cpsw_emac0: slave@0 {
- slave_reg_ofs = <0x208>;
+ slave_reg_ofs = <0x200>;
sliver_reg_ofs = <0xd80>;
phy_id = "davinci_mdio.16:00";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
cpsw_emac1: slave@1 {
- slave_reg_ofs = <0x308>;
+ slave_reg_ofs = <0x300>;
sliver_reg_ofs = <0xdc0>;
phy_id = "davinci_mdio.16:01";
/* Filled in by U-Boot */
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 5c427cf..588f5c3 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -160,18 +160,74 @@ struct cpsw_ss_regs {
u32 dlr_ltype;
};
-struct cpsw_slave_regs {
- u32 max_blks;
- u32 blk_cnt;
- u32 flow_thresh;
- u32 port_vlan;
- u32 tx_pri_map;
- u32 ts_ctl;
- u32 ts_seq_ltype;
- u32 ts_vlan;
- u32 sa_lo;
- u32 sa_hi;
-};
+/* CPSW_PORT_V1 */
+#define CPSW1_MAX_BLKS 0x00 /* Maximum FIFO Blocks */
+#define CPSW1_BLK_CNT 0x04 /* FIFO Block Usage Count (Read Only) */
+#define CPSW1_TX_IN_CTL 0x08 /* Transmit FIFO Control */
+#define CPSW1_PORT_VLAN 0x0c /* VLAN Register */
+#define CPSW1_TX_PRI_MAP 0x10 /* Tx Header Priority to Switch Pri Mapping */
+#define CPSW1_TS_CTL 0x14 /* Time Sync Control */
+#define CPSW1_TS_SEQ_LTYPE 0x18 /* Time Sync Sequence ID Offset and Msg Type */
+#define CPSW1_TS_VLAN 0x1c /* Time Sync VLAN1 and VLAN2 */
+
+/* CPSW_PORT_V2 */
+#define CPSW2_CONTROL 0x00 /* Control Register */
+#define CPSW2_MAX_BLKS 0x08 /* Maximum FIFO Blocks */
+#define CPSW2_BLK_CNT 0x0c /* FIFO Block Usage Count (Read Only) */
+#define CPSW2_TX_IN_CTL 0x10 /* Transmit FIFO Control */
+#define CPSW2_PORT_VLAN 0x14 /* VLAN Register */
+#define CPSW2_TX_PRI_MAP 0x18 /* Tx Header Priority to Switch Pri Mapping */
+#define CPSW2_TS_SEQ_MTYPE 0x1c /* Time Sync Sequence ID Offset and Msg Type */
+
+/* CPSW_PORT_V1 and V2 */
+#define SA_LO 0x20 /* CPGMAC_SL Source Address Low */
+#define SA_HI 0x24 /* CPGMAC_SL Source Address High */
+#define SEND_PERCENT 0x28 /* Transmit Queue Send Percentages */
+
+/* CPSW_PORT_V2 only */
+#define RX_DSCP_PRI_MAP0 0x30 /* Rx DSCP Priority to Rx Packet Mapping */
+#define RX_DSCP_PRI_MAP1 0x34 /* Rx DSCP Priority to Rx Packet Mapping */
+#define RX_DSCP_PRI_MAP2 0x38 /* Rx DSCP Priority to Rx Packet Mapping */
+#define RX_DSCP_PRI_MAP3 0x3c /* Rx DSCP Priority to Rx Packet Mapping */
+#define RX_DSCP_PRI_MAP4 0x40 /* Rx DSCP Priority to Rx Packet Mapping */
+#define RX_DSCP_PRI_MAP5 0x44 /* Rx DSCP Priority to Rx Packet Mapping */
+#define RX_DSCP_PRI_MAP6 0x48 /* Rx DSCP Priority to Rx Packet Mapping */
+#define RX_DSCP_PRI_MAP7 0x4c /* Rx DSCP Priority to Rx Packet Mapping */
+
+/* Bit definitions for the CPSW2_CONTROL register */
+#define PASS_PRI_TAGGED (1<<24) /* Pass Priority Tagged */
+#define VLAN_LTYPE2_EN (1<<21) /* VLAN LTYPE 2 enable */
+#define VLAN_LTYPE1_EN (1<<20) /* VLAN LTYPE 1 enable */
+#define DSCP_PRI_EN (1<<16) /* DSCP Priority Enable */
+#define TS_320 (1<<14) /* Time Sync Dest Port 320 enable */
+#define TS_319 (1<<13) /* Time Sync Dest Port 319 enable */
+#define TS_132 (1<<12) /* Time Sync Dest IP Addr 132 enable */
+#define TS_131 (1<<11) /* Time Sync Dest IP Addr 131 enable */
+#define TS_130 (1<<10) /* Time Sync Dest IP Addr 130 enable */
+#define TS_129 (1<<9) /* Time Sync Dest IP Addr 129 enable */
+#define TS_BIT8 (1<<8) /* ts_ttl_nonzero? */
+#define TS_ANNEX_D_EN (1<<4) /* Time Sync Annex D enable */
+#define TS_LTYPE2_EN (1<<3) /* Time Sync LTYPE 2 enable */
+#define TS_LTYPE1_EN (1<<2) /* Time Sync LTYPE 1 enable */
+#define TS_TX_EN (1<<1) /* Time Sync Transmit Enable */
+#define TS_RX_EN (1<<0) /* Time Sync Receive Enable */
+
+#define CTRL_TS_BITS \
+ (TS_320 | TS_319 | TS_132 | TS_131 | TS_130 | TS_129 | TS_BIT8 | \
+ TS_ANNEX_D_EN | TS_LTYPE1_EN)
+
+#define CTRL_ALL_TS_MASK (CTRL_TS_BITS | TS_TX_EN | TS_RX_EN)
+#define CTRL_TX_TS_BITS (CTRL_TS_BITS | TS_TX_EN)
+#define CTRL_RX_TS_BITS (CTRL_TS_BITS | TS_RX_EN)
+
+/* Bit definitions for the CPSW2_TS_SEQ_MTYPE register */
+#define TS_SEQ_ID_OFFSET_SHIFT (16) /* Time Sync Sequence ID Offset */
+#define TS_SEQ_ID_OFFSET_MASK (0x3f)
+#define TS_MSG_TYPE_EN_SHIFT (0) /* Time Sync Message Type Enable */
+#define TS_MSG_TYPE_EN_MASK (0xffff)
+
+/* The PTP event messages - Sync, Delay_Req, Pdelay_Req, and Pdelay_Resp. */
+#define EVENT_MSG_BITS ((1<<0) | (1<<1) | (1<<2) | (1<<3))
struct cpsw_host_regs {
u32 max_blks;
@@ -197,7 +253,7 @@ struct cpsw_sliver_regs {
};
struct cpsw_slave {
- struct cpsw_slave_regs __iomem *regs;
+ void __iomem *regs;
struct cpsw_sliver_regs __iomem *sliver;
int slave_num;
u32 mac_control;
@@ -205,6 +261,16 @@ struct cpsw_slave {
struct phy_device *phy;
};
+static inline u32 slave_read(struct cpsw_slave *slave, u32 offset)
+{
+ return __raw_readl(slave->regs + offset);
+}
+
+static inline void slave_write(struct cpsw_slave *slave, u32 val, u32 offset)
+{
+ __raw_writel(val, slave->regs + offset);
+}
+
struct cpsw_priv {
spinlock_t lock;
struct platform_device *pdev;
@@ -396,8 +462,8 @@ static inline void soft_reset(const char *module, void __iomem *reg)
static void cpsw_set_slave_mac(struct cpsw_slave *slave,
struct cpsw_priv *priv)
{
- __raw_writel(mac_hi(priv->mac_addr), &slave->regs->sa_hi);
- __raw_writel(mac_lo(priv->mac_addr), &slave->regs->sa_lo);
+ slave_write(slave, mac_hi(priv->mac_addr), SA_HI);
+ slave_write(slave, mac_lo(priv->mac_addr), SA_LO);
}
static void _cpsw_adjust_link(struct cpsw_slave *slave,
@@ -483,7 +549,15 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
/* setup priority mapping */
__raw_writel(RX_PRIORITY_MAPPING, &slave->sliver->rx_pri_map);
- __raw_writel(TX_PRIORITY_MAPPING, &slave->regs->tx_pri_map);
+
+ switch (priv->version) {
+ case CPSW_VERSION_1:
+ slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP);
+ break;
+ case CPSW_VERSION_2:
+ slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP);
+ break;
+ }
/* setup max packet size, and mac address */
__raw_writel(priv->rx_packet_max, &slave->sliver->rx_maxlen);
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists