| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGhQ9VwUr=ak3Rjo0JVTkdP=4k6xkAKCDEwFyO5v3Fui0Md4Lg@mail.gmail.com>
Date: Sun, 4 Nov 2012 23:21:54 +0100
From: Joachim Eastwood <manabian@...il.com>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
Cc: linux-arm-kernel@...ts.infradead.org,
devicetree-discuss@...ts.ozlabs.org,
Nicolas Ferre <nicolas.ferre@...el.com>, netdev@...r.kernel.org
Subject: Re: [PATCH 1/2] net: at91_ether: add dt support
Hi Jean-Christophe,
Some minor comments below.
On 4 November 2012 19:10, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@...osoft.com> wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
> Cc: Nicolas Ferre <nicolas.ferre@...el.com>
> Cc: Joachim Eastwood <manabian@...il.com>
> Cc: netdev@...r.kernel.org
> ---
> .../devicetree/bindings/net/cdns-emac.txt | 23 +++++++
> drivers/net/ethernet/cadence/at91_ether.c | 72 ++++++++++++++++++--
> 2 files changed, 88 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/cdns-emac.txt
>
> diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt
> new file mode 100644
> index 0000000..45b8760
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/cdns-emac.txt
> @@ -0,0 +1,23 @@
> +* Cadence EMAC Ethernet controller
> +
> +Required properties:
> +- compatible: Should be "cdns,[<chip>-]{emac}"
> + Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
> + or the generic form: "cdns,emac".
> +- reg: Address and length of the register set for the device
> +- interrupts: Should contain macb interrupt
> +- phy-mode: String, operation mode of the PHY interface.
> + Supported values are: "mii", "rmii".
> +
> +Optional properties:
> +- local-mac-address: 6 bytes, mac address
> +
> +Examples:
> +
> + macb0: ethernet@...c4000 {
> + compatible = "cdns,atrm9200-emac";
Typo in the compatible string. Should be "cdns,at91rm9200-emac"
> + reg = <0xfffc4000 0x4000>;
> + interrupts = <21>;
> + phy-mode = "rmii";
> + local-mac-address = [3a 0e 03 04 05 06];
> + };
> diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
> index 0d6392d..3e843b4 100644
> --- a/drivers/net/ethernet/cadence/at91_ether.c
> +++ b/drivers/net/ethernet/cadence/at91_ether.c
> @@ -31,6 +31,9 @@
> #include <linux/gfp.h>
> #include <linux/phy.h>
> #include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_net.h>
>
> #include "macb.h"
>
> @@ -443,6 +446,49 @@ static const struct net_device_ops at91ether_netdev_ops = {
> #endif
> };
>
> +#if defined(CONFIG_OF)
> +static const struct of_device_id at91ether_dt_ids[] = {
> + { .compatible = "cdns,at91rm9200-emac" },
> + { .compatible = "cdns,emac" },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, at91ether_dt_ids);
> +
> +static int at91ether_get_phy_mode_dt(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> +
> + if (np)
> + return of_get_phy_mode(np);
> +
> + return -ENODEV;
> +}
> +
> +static int at91ether_get_hwaddr_dt(struct macb *bp)
> +{
> + struct device_node *np = bp->pdev->dev.of_node;
Space between variables and code, please.
> + if (np) {
> + const char *mac = of_get_mac_address(np);
> + if (mac) {
> + memcpy(bp->dev->dev_addr, mac, ETH_ALEN);
> + return 0;
> + }
> + }
> +
> + return -ENODEV;
> +}
> +#else
> +static int at91ether_get_phy_mode_dt(struct platform_device *pdev)
> +{
> + return -ENODEV;
> +}
> +static int at91ether_get_hwaddr_dt(struct macb *bp)
> +{
> + return -ENODEV;
> +}
> +#endif
> +
> /*
> * Detect MAC & PHY and perform ethernet interface initialization
> */
> @@ -466,7 +512,8 @@ static int __init at91ether_probe(struct platform_device *pdev)
> lp = netdev_priv(dev);
> lp->pdev = pdev;
> lp->dev = dev;
> - lp->board_data = *board_data;
> + if (board_data)
> + lp->board_data = *board_data;
> spin_lock_init(&lp->lock);
>
> dev->base_addr = regs->start; /* physical base address */
> @@ -496,18 +543,28 @@ static int __init at91ether_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, dev);
> SET_NETDEV_DEV(dev, &pdev->dev);
>
> - get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
> + res = at91ether_get_hwaddr_dt(lp);
> + if (res < 0)
> + get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
> +
> update_mac_address(dev); /* Program ethernet address into MAC */
>
> + res = at91ether_get_phy_mode_dt(pdev);
> + if (res < 0) {
> + if (board_data && board_data->is_rmii)
> + lp->phy_interface = PHY_INTERFACE_MODE_RMII;
> + else
> + lp->phy_interface = PHY_INTERFACE_MODE_MII;
> + } else {
> + lp->phy_interface = res;
> + }
> +
> macb_writel(lp, NCR, 0);
>
> - if (board_data->is_rmii) {
> + if (lp->phy_interface == PHY_INTERFACE_MODE_RMII)
> macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG) | MACB_BIT(RM9200_RMII));
> - lp->phy_interface = PHY_INTERFACE_MODE_RMII;
> - } else {
> + else
> macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG));
> - lp->phy_interface = PHY_INTERFACE_MODE_MII;
> - }
>
> /* Register the network interface */
> res = register_netdev(dev);
> @@ -602,6 +659,7 @@ static struct platform_driver at91ether_driver = {
> .driver = {
> .name = DRV_NAME,
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(at91ether_dt_ids),
> },
> };
>
Tested-by: Joachim Eastwood <manabian@...il.com>
regards
Joachim Eastwood
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists