[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPcc5Pj0ffeb8O8YW3SAS21=+ub8ypc34=YaAxTB-qh9DGeawQ@mail.gmail.com>
Date: Wed, 7 Nov 2012 17:30:03 +0200
From: Amir Vadai <amirv@...lanox.com>
To: Eric Dumazet <eric.dumazet@...il.com>
Cc: David Miller <davem@...emloft.net>,
netdev <netdev@...r.kernel.org>,
Yevgeny Petrilin <yevgenyp@...lanox.com>,
Or Gerlitz <ogerlitz@...lanox.com>,
Vimalkumar <j.vimal@...il.com>
Subject: Re: [PATCH net-next] mlx4: change TX coalescing defaults
Acked.
BTW, a mail will be sent - I'm replacing Yevgeny Petrilin as mlx4_en maintainer.
(sorry for the previous non plain text mail)
Amir
On Tue, Nov 6, 2012 at 4:20 AM, Eric Dumazet <eric.dumazet@...il.com> wrote:
>
> From: Eric Dumazet <edumazet@...gle.com>
>
> mlx4 currently uses a too high tx coalescing setting, deferring
> TX completion interrupts by up to 128 us.
>
> With the recent skb_orphan() removal in commit 8112ec3b872,
> performance of a single TCP flow is capped to ~4 Gbps, unless
> we increase tcp_limit_output_bytes.
>
> I suggest using 16 us instead of 128 us, allowing a finer control.
>
> Performance of a single TCP flow is restored to previous levels,
> while keeping TCP small queues fully enabled with default sysctl.
>
> This patch is also a BQL prereq.
>
> Reported-by: Vimalkumar <j.vimal@...il.com>
> Signed-off-by: Eric Dumazet <edumazet@...gle.com>
> Cc: Yevgeny Petrilin <yevgenyp@...lanox.com>
> Cc: Or Gerlitz <ogerlitz@...lanox.com>
> ---
> By the way, is BQL addition planned for this driver ?
>
> drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 2 +-
> drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
> b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
> index edd9cb8..2b23ca2 100644
> --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
> +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
> @@ -870,7 +870,7 @@ static void mlx4_en_set_default_moderation(struct
> mlx4_en_priv *priv)
> /* If we haven't received a specific coalescing setting
> * (module param), we set the moderation parameters as follows:
> * - moder_cnt is set to the number of mtu sized packets to
> - * satisfy our coelsing target.
> + * satisfy our coalescing target.
> * - moder_time is set to a fixed value.
> */
> priv->rx_frames = MLX4_EN_RX_COAL_TARGET;
> diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
> b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
> index 9d27e42..8a5e70d 100644
> --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
> +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
> @@ -126,7 +126,7 @@ enum {
> #define MLX4_EN_RX_COAL_TIME 0x10
>
> #define MLX4_EN_TX_COAL_PKTS 16
> -#define MLX4_EN_TX_COAL_TIME 0x80
> +#define MLX4_EN_TX_COAL_TIME 0x10
>
> #define MLX4_EN_RX_RATE_LOW 400000
> #define MLX4_EN_RX_COAL_TIME_LOW 0
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists