| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1352823451-27042-2-git-send-email-ariele@broadcom.com>
Date: Tue, 13 Nov 2012 18:17:10 +0200
From: "Ariel Elior" <ariele@...adcom.com>
To: "David Miller" <davem@...emloft.net>
cc: netdev <netdev@...r.kernel.org>,
"Ariel Elior" <ariele@...adcom.com>,
"Eilon Greenstein" <eilong@...adcom.com>
Subject: [PATCH 01/22] bnx2x: Support probing and removing of VF device
To support probing and removing of a bnx2x virtual function
the following were added:
1. add bnx2x_vfpf.h: defines the VF to PF channel
2. add bnx2x_sriov.h: header for bnx2x SR-IOV functionality
3. enumerate VF hw types (identify VFs)
4. if driving a VF, map VF bar
5. if driving a VF, allocate Vf to PF channel
6. refactor interrupt flows to include VF
Signed-off-by: Ariel Elior <ariele@...adcom.com>
Signed-off-by: Eilon Greenstein <eilong@...adcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 24 ++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 27 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 397 +++++++++++++--------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 9 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 27 ++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h | 37 ++
7 files changed, 371 insertions(+), 152 deletions(-)
create mode 100644 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
create mode 100644 drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index de121cc..9c682fb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -50,6 +50,14 @@
#include "bnx2x_dcb.h"
#include "bnx2x_stats.h"
+enum bnx2x_int_mode {
+ BNX2X_INT_MODE_MSIX,
+ BNX2X_INT_MODE_INTX,
+ BNX2X_INT_MODE_MSI
+};
+
+
+
/* error/debug prints */
#define DRV_MODULE_NAME "bnx2x"
@@ -955,6 +963,9 @@ struct bnx2x_port {
extern struct workqueue_struct *bnx2x_wq;
#define BNX2X_MAX_NUM_OF_VFS 64
+#define BNX2X_VF_CID_WND 0
+#define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND)
+#define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF)
#define BNX2X_VF_ID_INVALID 0xFF
/*
@@ -1231,6 +1242,10 @@ struct bnx2x {
(vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1))
#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp))
+ /* vf pf channel mailbox contains request and response buffers */
+ struct bnx2x_vf_mbx_msg *vf2pf_mbox;
+ dma_addr_t vf2pf_mbox_mapping;
+
struct net_device *dev;
struct pci_dev *pdev;
@@ -1318,8 +1333,6 @@ struct bnx2x {
#define DISABLE_MSI_FLAG (1 << 7)
#define TPA_ENABLE_FLAG (1 << 8)
#define NO_MCP_FLAG (1 << 9)
-
-#define BP_NOMCP(bp) (bp->flags & NO_MCP_FLAG)
#define GRO_ENABLE_FLAG (1 << 10)
#define MF_FUNC_DIS (1 << 11)
#define OWN_CNIC_IRQ (1 << 12)
@@ -1330,6 +1343,11 @@ struct bnx2x {
#define BC_SUPPORTS_FCOE_FEATURES (1 << 19)
#define USING_SINGLE_MSIX_FLAG (1 << 20)
#define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21)
+#define IS_VF_FLAG (1 << 22)
+
+#define BP_NOMCP(bp) (bp->flags & NO_MCP_FLAG)
+#define IS_VF(bp) (bp->flags & IS_VF_FLAG)
+#define IS_PF(bp) (!(bp->flags & IS_VF_FLAG))
#define NO_ISCSI(bp) ((bp)->flags & NO_ISCSI_FLAG)
#define NO_ISCSI_OOO(bp) ((bp)->flags & NO_ISCSI_OOO_FLAG)
@@ -1431,6 +1449,7 @@ struct bnx2x {
u8 igu_sb_cnt;
u8 min_msix_vec_cnt;
+ u32 igu_base_addr;
dma_addr_t def_status_blk_mapping;
struct bnx2x_slowpath *slowpath;
@@ -1579,6 +1598,7 @@ struct bnx2x {
char fw_ver[32];
const struct firmware *firmware;
+
/* DCB support on/off */
u16 dcb_state;
#define BNX2X_DCB_STATE_OFF 0
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 54d522d..73dbe0a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1426,12 +1426,17 @@ void bnx2x_free_irq(struct bnx2x *bp)
int bnx2x_enable_msix(struct bnx2x *bp)
{
- int msix_vec = 0, i, rc, req_cnt;
+ int msix_vec = 0, i, rc;
- bp->msix_table[msix_vec].entry = msix_vec;
- BNX2X_DEV_INFO("msix_table[0].entry = %d (slowpath)\n",
- bp->msix_table[0].entry);
- msix_vec++;
+ DP(BNX2X_MSG_SP, "BNX2X_NUM_ETH_QUEUES %d\n", BNX2X_NUM_ETH_QUEUES(bp));
+
+ /* VFs don't have default status blocks */
+ if (IS_PF(bp)) {
+ bp->msix_table[msix_vec].entry = msix_vec;
+ BNX2X_DEV_INFO("msix_table[0].entry = %d (slowpath)\n",
+ bp->msix_table[0].entry);
+ msix_vec++;
+ }
/* Cnic requires an msix vector for itself */
if (CNIC_SUPPORT(bp)) {
@@ -1449,9 +1454,10 @@ int bnx2x_enable_msix(struct bnx2x *bp)
msix_vec++;
}
- req_cnt = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_SUPPORT(bp) + 1;
+ DP(BNX2X_MSG_SP, "about to request enable msix with %d vectors",
+ msix_vec);
- rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], req_cnt);
+ rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], msix_vec);
/*
* reconfigure number of tx/rx queues according to available
@@ -1459,7 +1465,7 @@ int bnx2x_enable_msix(struct bnx2x *bp)
*/
if (rc >= BNX2X_MIN_MSIX_VEC_CNT(bp)) {
/* how less vectors we will have? */
- int diff = req_cnt - rc;
+ int diff = msix_vec - rc;
BNX2X_DEV_INFO("Trying to use less MSI-X vectors: %d\n", rc);
@@ -3884,7 +3890,10 @@ int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp)
* The biggest MSI-X table we might need is as a maximum number of fast
* path IGU SBs plus default SB (for PF).
*/
- msix_table_size = bp->igu_sb_cnt + 1;
+ msix_table_size = bp->igu_sb_cnt;
+ if (IS_PF(bp))
+ msix_table_size++;
+ BNX2X_DEV_INFO("msix_table_size %d", msix_table_size);
/* fp array: RSS plus CNIC related L2 queues */
fp_array_size = BNX2X_MAX_RSS_COUNT(bp) + CNIC_SUPPORT(bp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index ad28074..c5813c6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -863,7 +863,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp)
netif_napi_del(&bnx2x_fp(bp, i, napi));
}
-void bnx2x_set_int_mode(struct bnx2x *bp);
+int bnx2x_set_int_mode(struct bnx2x *bp);
static inline void bnx2x_disable_msi(struct bnx2x *bp)
{
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 0546cf4..22c3338 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -59,6 +59,8 @@
#include "bnx2x_init.h"
#include "bnx2x_init_ops.h"
#include "bnx2x_cmn.h"
+#include "bnx2x_vfpf.h"
+#include "bnx2x_sriov.h"
#include "bnx2x_dcb.h"
#include "bnx2x_sp.h"
@@ -133,39 +135,49 @@ enum bnx2x_board_type {
BCM57711E,
BCM57712,
BCM57712_MF,
+ BCM57712_VF,
BCM57800,
BCM57800_MF,
+ BCM57800_VF,
BCM57810,
BCM57810_MF,
- BCM57840_O,
+ BCM57810_VF,
BCM57840_4_10,
BCM57840_2_20,
- BCM57840_MFO,
BCM57840_MF,
+ BCM57840_VF,
BCM57811,
- BCM57811_MF
+ BCM57811_MF,
+ BCM57840_O,
+ BCM57840_MFO,
+ BCM57811_VF
};
/* indexed by board_type, above */
static struct {
char *name;
} board_info[] __devinitdata = {
- { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
- { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
- { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
- { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
- { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
- { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
- { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
- { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
- { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
- { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
- { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" },
- { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" },
- { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function"},
- { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function"},
- { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet"},
- { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function"},
+ [BCM57710] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
+ [BCM57711] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
+ [BCM57711E] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
+ [BCM57712] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
+ [BCM57712_MF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
+ [BCM57712_VF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" },
+ [BCM57800] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
+ [BCM57800_MF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
+ [BCM57800_VF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" },
+ [BCM57810] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
+ [BCM57810_MF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
+ [BCM57810_VF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" },
+ [BCM57840_4_10] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" },
+ [BCM57840_2_20] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" },
+ [BCM57840_MF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
+ [BCM57840_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" },
+ [BCM57811] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" },
+ [BCM57811_MF] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" },
+ [BCM57840_O] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
+ [BCM57840_MFO] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
+ [BCM57811_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }
};
#ifndef PCI_DEVICE_ID_NX2_57710
@@ -7773,41 +7785,49 @@ int bnx2x_setup_leading(struct bnx2x *bp)
*
* In case of MSI-X it will also try to enable MSI-X.
*/
-void bnx2x_set_int_mode(struct bnx2x *bp)
+int bnx2x_set_int_mode(struct bnx2x *bp)
{
+ int rc = 0;
+
+ if (IS_VF(bp) && int_mode != BNX2X_INT_MODE_MSIX)
+ return -EINVAL;
+
switch (int_mode) {
- case INT_MODE_MSI:
+ case BNX2X_INT_MODE_MSIX:
+ /* attempt to enable msix */
+ rc = bnx2x_enable_msix(bp);
+
+ /* msix attained */
+ if (!rc)
+ return 0;
+
+ /* vfs use only msix */
+ if (rc && IS_VF(bp))
+ return rc;
+
+ /* failed to enable multiple MSI-X */
+ BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n",
+ bp->num_queues,
+ 1 + bp->num_cnic_queues);
+
+ /* falling through... */
+ case BNX2X_INT_MODE_MSI:
bnx2x_enable_msi(bp);
+
/* falling through... */
- case INT_MODE_INTx:
+ case BNX2X_INT_MODE_INTX:
bp->num_ethernet_queues = 1;
bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
BNX2X_DEV_INFO("set number of queues to 1\n");
break;
default:
- /* if we can't use MSI-X we only need one fp,
- * so try to enable MSI-X with the requested number of fp's
- * and fallback to MSI or legacy INTx with one fp
- */
- if (bnx2x_enable_msix(bp) ||
- bp->flags & USING_SINGLE_MSIX_FLAG) {
- /* failed to enable multiple MSI-X */
- BNX2X_DEV_INFO("Failed to enable multiple MSI-X (%d), set number of queues to %d\n",
- bp->num_queues,
- 1 + bp->num_cnic_queues);
-
- bp->num_queues = 1 + bp->num_cnic_queues;
-
- /* Try to enable MSI */
- if (!(bp->flags & USING_SINGLE_MSIX_FLAG) &&
- !(bp->flags & DISABLE_MSI_FLAG))
- bnx2x_enable_msi(bp);
- }
- break;
+ BNX2X_DEV_INFO("unknown value in int_mode module parameter\n");
+ return -EINVAL;
}
+ return 0;
}
-/* must be called prioir to any HW initializations */
+/* must be called prior to any HW initializations */
static inline u16 bnx2x_cid_ilt_lines(struct bnx2x *bp)
{
return L2_ILT_LINES(bp);
@@ -11002,9 +11022,13 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task);
INIT_DELAYED_WORK(&bp->period_task, bnx2x_period_task);
- rc = bnx2x_get_hwinfo(bp);
- if (rc)
- return rc;
+ if (IS_PF(bp)) {
+ rc = bnx2x_get_hwinfo(bp);
+ if (rc)
+ return rc;
+ } else {
+ random_ether_addr(bp->dev->dev_addr);
+ }
bnx2x_set_modes_bitmap(bp);
@@ -11017,7 +11041,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
func = BP_FUNC(bp);
/* need to reset chip if undi was active */
- if (!BP_NOMCP(bp)) {
+ if (IS_PF(bp) && !BP_NOMCP(bp)) {
/* init fw_seq */
bp->fw_seq =
SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
@@ -11054,6 +11078,8 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
bp->mrrs = mrrs;
bp->tx_ring_size = IS_MF_FCOE_AFEX(bp) ? 0 : MAX_TX_AVAIL;
+ if (IS_VF(bp))
+ bp->rx_ring_size = MAX_RX_AVAIL;
/* make sure that the numbers are in the right granularity */
bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
@@ -11077,10 +11103,16 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
/* multiple tx priority */
if (CHIP_IS_E1x(bp))
bp->max_cos = BNX2X_MULTI_TX_COS_E1X;
- if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp))
+ else if (CHIP_IS_E2(bp) || CHIP_IS_E3A0(bp))
bp->max_cos = BNX2X_MULTI_TX_COS_E2_E3A0;
- if (CHIP_IS_E3B0(bp))
+ else if (CHIP_IS_E3B0(bp))
bp->max_cos = BNX2X_MULTI_TX_COS_E3B0;
+ else if (IS_VF(bp))
+ bp->max_cos = 1;
+ else
+ BNX2X_ERR("unknown chip %x revision %x\n",
+ CHIP_NUM(bp), CHIP_REV(bp));
+ pr_info("set bp->max_cos to %d\n", bp->max_cos);
/* We need at least one default status block for slow-path events,
* second status block for the L2 queue, and a third status block for
@@ -11465,11 +11497,11 @@ static int bnx2x_set_coherency_mask(struct bnx2x *bp)
return 0;
}
-static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
+static int __devinit bnx2x_init_dev(struct bnx2x *bp,
+ struct pci_dev *pdev,
struct net_device *dev,
unsigned long board_type)
{
- struct bnx2x *bp;
int rc;
u32 pci_cfg_dword;
bool chip_is_e1x = (board_type == BCM57710 ||
@@ -11477,11 +11509,10 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
board_type == BCM57711E);
SET_NETDEV_DEV(dev, &pdev->dev);
- bp = netdev_priv(dev);
bp->dev = dev;
bp->pdev = pdev;
- bp->flags = 0;
+
rc = pci_enable_device(pdev);
if (rc) {
@@ -11497,9 +11528,8 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
goto err_out_disable;
}
- if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
- dev_err(&bp->pdev->dev, "Cannot find second PCI device"
- " base address, aborting\n");
+ if (IS_PF(bp) && !(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
+ dev_err(&bp->pdev->dev, "Cannot find second PCI device base address, aborting\n");
rc = -ENODEV;
goto err_out_disable;
}
@@ -11516,12 +11546,14 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
pci_save_state(pdev);
}
- bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (bp->pm_cap == 0) {
- dev_err(&bp->pdev->dev,
- "Cannot find power management capability, aborting\n");
- rc = -EIO;
- goto err_out_release;
+ if (IS_PF(bp)) {
+ bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (bp->pm_cap == 0) {
+ dev_err(&bp->pdev->dev,
+ "Cannot find power management capability, aborting\n");
+ rc = -EIO;
+ goto err_out_release;
+ }
}
if (!pci_is_pcie(pdev)) {
@@ -11572,25 +11604,28 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
* Clean the following indirect addresses for all functions since it
* is not used by the driver.
*/
- REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
+ if (IS_PF(bp)) {
+ REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
+
+ if (chip_is_e1x) {
+ REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
+ }
- if (chip_is_e1x) {
- REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
+ /* Enable internal target-read (in case we are probed after PF
+ * FLR). Must be done prior to any BAR read access. Only for
+ * 57712 and up
+ */
+ if (!chip_is_e1x)
+ REG_WR(bp,
+ PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
}
- /*
- * Enable internal target-read (in case we are probed after PF FLR).
- * Must be done prior to any BAR read access. Only for 57712 and up
- */
- if (!chip_is_e1x)
- REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
-
dev->watchdog_timeo = TX_TIMEOUT;
dev->netdev_ops = &bnx2x_netdev_ops;
@@ -11642,7 +11677,8 @@ err_out:
static void __devinit bnx2x_get_pcie_width_speed(struct bnx2x *bp,
int *width, int *speed)
{
- u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL);
+ u32 val;
+ pci_read_config_dword(bp->pdev, PCICFG_LINK_CONTROL, &val);
*width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
@@ -11908,6 +11944,8 @@ static int bnx2x_set_qm_cid_count(struct bnx2x *bp)
{
int cid_count = BNX2X_L2_MAX_CID(bp);
+
+
if (CNIC_SUPPORT(bp))
cid_count += CNIC_CID_MAX;
return roundup(cid_count, QM_CID_ROUND);
@@ -11920,9 +11958,9 @@ static int bnx2x_set_qm_cid_count(struct bnx2x *bp)
*
*/
static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev,
- int cnic_cnt)
+ int cnic_cnt, bool is_vf)
{
- int pos;
+ int pos, index;
u16 control;
pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
@@ -11931,110 +11969,154 @@ static int bnx2x_get_num_non_def_sbs(struct pci_dev *pdev,
* If MSI-X is not supported - return number of SBs needed to support
* one fast path queue: one FP queue + SB for CNIC
*/
- if (!pos)
+ if (!pos) {
+ pr_err("no msix");
return 1 + cnic_cnt;
+ }
+
+ pr_info("msix capability found");
/*
* The value in the PCI configuration space is the index of the last
* entry, namely one less than the actual size of the table, which is
* exactly what we want to return from this function: number of all SBs
* without the default SB.
+ * For VFs there is no default SB, then we return (index+1).
*/
pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &control);
- return control & PCI_MSIX_FLAGS_QSIZE;
+
+ index = control & PCI_MSIX_FLAGS_QSIZE;
+
+ return is_vf ? index + 1 : index;
}
-static int __devinit bnx2x_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int set_max_cos_est(int chip_id)
{
- struct net_device *dev = NULL;
- struct bnx2x *bp;
- int pcie_width, pcie_speed;
- int rc, max_non_def_sbs;
- int rx_count, tx_count, rss_count, doorbell_size;
- int cnic_cnt;
- /*
- * An estimated maximum supported CoS number according to the chip
- * version.
- * We will try to roughly estimate the maximum number of CoSes this chip
- * may support in order to minimize the memory allocated for Tx
- * netdev_queue's. This number will be accurately calculated during the
- * initialization of bp->max_cos based on the chip versions AND chip
- * revision in the bnx2x_init_bp().
- */
- u8 max_cos_est = 0;
-
- switch (ent->driver_data) {
+ switch (chip_id) {
case BCM57710:
case BCM57711:
case BCM57711E:
- max_cos_est = BNX2X_MULTI_TX_COS_E1X;
- break;
-
+ return BNX2X_MULTI_TX_COS_E1X;
case BCM57712:
case BCM57712_MF:
- max_cos_est = BNX2X_MULTI_TX_COS_E2_E3A0;
- break;
-
+ case BCM57712_VF:
+ return BNX2X_MULTI_TX_COS_E2_E3A0;
case BCM57800:
case BCM57800_MF:
+ case BCM57800_VF:
case BCM57810:
case BCM57810_MF:
- case BCM57840_O:
case BCM57840_4_10:
case BCM57840_2_20:
+ case BCM57840_O:
case BCM57840_MFO:
+ case BCM57810_VF:
case BCM57840_MF:
+ case BCM57840_VF:
case BCM57811:
case BCM57811_MF:
- max_cos_est = BNX2X_MULTI_TX_COS_E3B0;
- break;
-
+ case BCM57811_VF:
+ return BNX2X_MULTI_TX_COS_E3B0;
+ return 1;
default:
- pr_err("Unknown board_type (%ld), aborting\n",
- ent->driver_data);
+ pr_err("Unknown board_type (%d), aborting\n",
+ chip_id);
return -ENODEV;
}
+}
- cnic_cnt = 1;
- max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt);
+static int set_is_vf(int chip_id)
+{
+ switch (chip_id) {
+ case BCM57712_VF:
+ case BCM57800_VF:
+ case BCM57810_VF:
+ case BCM57840_VF:
+ case BCM57811_VF:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int __devinit bnx2x_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev = NULL;
+ struct bnx2x *bp;
+ int pcie_width, pcie_speed;
+ int rc, max_non_def_sbs;
+ int rx_count, tx_count, rss_count, doorbell_size;
+ int max_cos_est;
+ bool is_vf;
+ int cnic_cnt;
+ /*
+ * An estimated maximum supported CoS number according to the chip
+ * version.
+ * We will try to roughly estimate the maximum number of CoSes this chip
+ * may support in order to minimize the memory allocated for Tx
+ * netdev_queue's. This number will be accurately calculated during the
+ * initialization of bp->max_cos based on the chip versions AND chip
+ * revision in the bnx2x_init_bp().
+ */
+ max_cos_est = set_max_cos_est(ent->driver_data);
+ if (max_cos_est < 0)
+ return max_cos_est;
+ is_vf = set_is_vf(ent->driver_data);
+ cnic_cnt = is_vf ? 0 : 1;
- WARN_ON(!max_non_def_sbs);
+ max_non_def_sbs = bnx2x_get_num_non_def_sbs(pdev, cnic_cnt, is_vf);
/* Maximum number of RSS queues: one IGU SB goes to CNIC */
rss_count = max_non_def_sbs - cnic_cnt;
+ if (rss_count < 1)
+ return -EINVAL;
+
/* Maximum number of netdev Rx queues: RSS + FCoE L2 */
rx_count = rss_count + cnic_cnt;
- /*
- * Maximum number of netdev Tx queues:
+ /* Maximum number of netdev Tx queues:
* Maximum TSS queues * Maximum supported number of CoS + FCoE L2
*/
tx_count = rss_count * max_cos_est + cnic_cnt;
+ /* no multi queue support for vfs. for now... */
+ if (is_vf) {
+ tx_count = 1;
+ rx_count = 1;
+ }
+
/* dev zeroed in init_etherdev */
+ pr_info("about to allocate ethernet device with tx_count %d rx_count %d",
+ tx_count, rx_count);
dev = alloc_etherdev_mqs(sizeof(*bp), tx_count, rx_count);
if (!dev)
return -ENOMEM;
bp = netdev_priv(dev);
+ bp->flags = 0;
+ if (is_vf)
+ bp->flags |= IS_VF_FLAG;
+
bp->igu_sb_cnt = max_non_def_sbs;
+ bp->igu_base_addr = IS_VF(bp) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;
bp->msg_enable = debug;
bp->cnic_support = cnic_cnt;
pci_set_drvdata(pdev, dev);
- rc = bnx2x_init_dev(pdev, dev, ent->driver_data);
+ rc = bnx2x_init_dev(bp, pdev, dev, ent->driver_data);
if (rc < 0) {
free_netdev(dev);
return rc;
}
+ BNX2X_DEV_INFO("This is a %s function\n",
+ IS_PF(bp) ? "physical" : "virtual");
BNX2X_DEV_INFO("Cnic support is %s\n", CNIC_SUPPORT(bp) ? "on" : "off");
- BNX2X_DEV_INFO("max_non_def_sbs %d\n", max_non_def_sbs);
-
+ BNX2X_DEV_INFO("Max num of status blocks %d\n", max_non_def_sbs);
BNX2X_DEV_INFO("Allocated netdev with %d tx and %d rx queues\n",
tx_count, rx_count);
@@ -12043,18 +12125,28 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
goto init_one_exit;
/*
- * Map doorbels here as we need the real value of bp->max_cos which
- * is initialized in bnx2x_init_bp().
+ * Map doorbells here as we need the real value of bp->max_cos which
+ * is initialized in bnx2x_init_bp() to determine the number of
+ * l2 connections.
*/
- doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT);
- if (doorbell_size > pci_resource_len(pdev, 2)) {
- dev_err(&bp->pdev->dev,
- "Cannot map doorbells, bar size too small, aborting\n");
- rc = -ENOMEM;
- goto init_one_exit;
+ if (IS_VF(bp)) {
+ /* vf doorbells are embedded within the regview */
+ bp->doorbells = bp->regview + PXP_VF_ADDR_DB_START;
+
+ /* allocate vf2pf mailbox for vf to pf channel */
+ BNX2X_PCI_ALLOC(bp->vf2pf_mbox, &bp->vf2pf_mbox_mapping,
+ sizeof(struct bnx2x_vf_mbx_msg));
+ } else {
+ doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT);
+ if (doorbell_size > pci_resource_len(pdev, 2)) {
+ dev_err(&bp->pdev->dev,
+ "Cannot map doorbells, bar size too small, aborting\n");
+ rc = -ENOMEM;
+ goto init_one_exit;
+ }
+ bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
+ doorbell_size);
}
- bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
- doorbell_size);
if (!bp->doorbells) {
dev_err(&bp->pdev->dev,
"Cannot map doorbell space, aborting\n");
@@ -12062,8 +12154,11 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
goto init_one_exit;
}
+
+
/* calc qm_cid_count */
bp->qm_cid_count = bnx2x_set_qm_cid_count(bp);
+ BNX2X_DEV_INFO("qm_cid_count %d\n", bp->qm_cid_count);
/* disable FCOE L2 queue for E1x*/
if (CHIP_IS_E1x(bp))
@@ -12075,13 +12170,21 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
/* Configure interrupt mode: try to enable MSI-X/MSI if
* needed.
*/
- bnx2x_set_int_mode(bp);
+ rc = bnx2x_set_int_mode(bp);
+ if (rc) {
+ dev_err(&pdev->dev, "Cannot set interrupts\n");
+ goto init_one_exit;
+ }
+ BNX2X_DEV_INFO("set interrupts successfully");
+
+ /* register the net device */
rc = register_netdev(dev);
if (rc) {
dev_err(&pdev->dev, "Cannot register net device\n");
goto init_one_exit;
}
+ BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name);
if (!NO_FCOE(bp)) {
@@ -12092,6 +12195,8 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
}
bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
+ BNX2X_DEV_INFO("got pcie width %d and speed %d\n",
+ pcie_width, pcie_speed);
BNX2X_DEV_INFO(
"%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
@@ -12105,11 +12210,16 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
return 0;
+alloc_mem_err:
+ BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping,
+ sizeof(struct bnx2x_vf_mbx_msg));
+ rc = -ENOMEM;
+
init_one_exit:
if (bp->regview)
iounmap(bp->regview);
- if (bp->doorbells)
+ if (IS_PF(bp) && bp->doorbells)
iounmap(bp->doorbells);
free_netdev(dev);
@@ -12149,13 +12259,15 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
unregister_netdev(dev);
/* Power on: we can't let PCI layer write to us while we are in D3 */
- bnx2x_set_power_state(bp, PCI_D0);
+ if (IS_PF(bp))
+ bnx2x_set_power_state(bp, PCI_D0);
/* Disable MSI/MSI-X */
bnx2x_disable_msi(bp);
/* Power off */
- bnx2x_set_power_state(bp, PCI_D3hot);
+ if (IS_PF(bp))
+ bnx2x_set_power_state(bp, PCI_D3hot);
/* Make sure RESET task is not scheduled before continuing */
cancel_delayed_work_sync(&bp->sp_rtnl_task);
@@ -12163,11 +12275,15 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
if (bp->regview)
iounmap(bp->regview);
- if (bp->doorbells)
- iounmap(bp->doorbells);
-
- bnx2x_release_firmware(bp);
+ /* for vf doorbells are part of the regview and were unmapped along with
+ * it. FW is only loaded by PF.
+ */
+ if (IS_PF(bp)) {
+ if (bp->doorbells)
+ iounmap(bp->doorbells);
+ bnx2x_release_firmware(bp);
+ }
bnx2x_free_mem_bp(bp);
free_netdev(dev);
@@ -12177,6 +12293,7 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
+ pr_info("rmmod complete");
}
static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 7d93adb..be8c2c4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -6538,6 +6538,15 @@
(7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */
+#define PXP_VF_ADDR_IGU_START 0
+#define PXP_VF_ADDR_IGU_SIZE (0x3000)
+#define PXP_VF_ADDR_IGU_END\
+ ((PXP_VF_ADDR_IGU_START) + (PXP_VF_ADDR_IGU_SIZE) - 1)
+#define PXP_VF_ADDR_DB_START 0x7c00
+#define PXP_VF_ADDR_DB_SIZE (0x200)
+#define PXP_VF_ADDR_DB_END\
+ ((PXP_VF_ADDR_DB_START) + (PXP_VF_ADDR_DB_SIZE) - 1)
+
#define MDIO_REG_BANK_CL73_IEEEB0 0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
new file mode 100644
index 0000000..181f30f
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -0,0 +1,27 @@
+/* bnx2x_sriov.h: Broadcom Everest network driver.
+ *
+ * Copyright 2009-2012 Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *
+ * Maintained by: Eilon Greenstein <eilong@...adcom.com>
+ * Written by: Shmulik Ravid
+ *
+ */
+#ifndef BNX2X_SRIOV_H
+#define BNX2X_SRIOV_H
+
+struct bnx2x_vf_mbx_msg {
+ union vfpf_tlvs req;
+ union pfvf_tlvs resp;
+};
+
+#endif /* bnx2x_sriov.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
new file mode 100644
index 0000000..82edebb
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
@@ -0,0 +1,37 @@
+/* bnx2x_vfpf.h: Broadcom Everest network driver.
+ *
+ * Copyright (c) 2011-2012 Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *
+ * Maintained by: Eilon Greenstein <eilong@...adcom.com>
+ *
+ */
+#ifndef VF_PF_IF_H
+#define VF_PF_IF_H
+
+/* HW VF-PF channel definitions
+ * A.K.A VF-PF mailbox
+ */
+#define TLV_BUFFER_SIZE 1024
+
+struct tlv_buffer_size {
+ u8 tlv_buffer[TLV_BUFFER_SIZE];
+};
+union vfpf_tlvs {
+
+ struct tlv_buffer_size tlv_buf_size;
+};
+
+union pfvf_tlvs {
+ struct tlv_buffer_size tlv_buf_size;
+};
+#endif /* VF_PF_IF_H */
--
1.7.9.GIT
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists