lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <878v9uow3h.fsf@nemi.mork.no>
Date:	Thu, 22 Nov 2012 09:55:30 +0100
From:	Bjørn Mork <bjorn@...k.no>
To:	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
Cc:	Sergei Shtylyov <sshtylyov@...sta.com>,
	linux-arm-kernel@...ts.infradead.org, linux-usb@...r.kernel.org,
	netdev@...r.kernel.org
Subject: Re: [PATCH 1/1] asix: use ramdom hw addr if the one read is not valid

Sergei Shtylyov <sshtylyov@...sta.com> writes:
> On 11/21/2012 01:22 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
>
>> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
>> Cc: linux-usb@...r.kernel.org
>> Cc: netdev@...r.kernel.org
>> ---
>>  drivers/net/usb/asix_devices.c |   24 +++++++++++++++++++++---
>>  1 file changed, 21 insertions(+), 3 deletions(-)
>
>> diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
>> index 33ab824..7ebec5b 100644
>> --- a/drivers/net/usb/asix_devices.c
>> +++ b/drivers/net/usb/asix_devices.c
>> @@ -225,7 +225,13 @@ static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
>>  			   ret);
>>  		goto out;
>>  	}
>> -	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
>> +
>> +	if (is_valid_ether_addr(buf)) {
>> +		memcpy(dev->net->dev_addr, buf, ETH_ALEN);
>> +	} else {
>> +		netdev_info(dev->net, "invalid hw address, using random\n");
>> +		eth_hw_addr_random(dev->net);
>> +	}
>>  
>>  	/* Initialize MII structure */
>>  	dev->mii.dev = dev->net;
[..]
>
>    Repeated thrice, this asks to be put into subroutine...

Yes.  Looking at the driver, this probably goes for most of the three
_bind() functions.  There is a lot of common code there.

But more important wrt the eth_hw_addr_random() change: Does this
actually work with real devices?  The driver implements a
asix_set_mac_address() which writes the address back to the device when
you change it.  I assume there is a reason for doing that.  Why don't
you do it here?


Bjørn
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ