netdev - VXLAN multicast receive not working

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Date:	Wed, 21 Nov 2012 23:27:27 +0000 (UTC)
From:	Bernhard Schmidt <berni@...kenwald.de>
To:	netdev@...r.kernel.org
Subject: VXLAN multicast receive not working

Hello,

I'm just trying to play with VXLAN a bit and wanted to build a Linux
gateway routing into seperate VXLAN segments.

Debian Wheezy, running 3.7-rc6, with current git HEAD of iproute2.
It's a VMware VM but that should not matter much.

Two vmxnet3 NICs, one with management and one with my VXLAN transport
network.

4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
    link/ether 00:50:56:8e:0d:c8 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.250/24 scope global eth1
    inet6 fe80::250:56ff:fe8e:dc8/64 scope link 
       valid_lft forever preferred_lft forever

In the same network segment are two VMware ESXi 5.0 hosts with Nexus
1000V for VLAN termination (10.0.0.1 and 10.0.0.2)

On top of that there is a VXLAN interface defined, with ID 12340 and
group 239.0.0.42.

6: vxlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue
state UNKNOWN mode DEFAULT 
    link/ether f6:59:e7:db:82:92 brd ff:ff:ff:ff:ff:ff
    vxlan id 12340 group 239.0.0.42 dev eth1 port 32768 61000 ageing 300 

That interface has an address as well

6: vxlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue
state UNKNOWN 
    link/ether f6:59:e7:db:82:92 brd ff:ff:ff:ff:ff:ff
    inet 10.1.1.1/24 scope global vxlan0
    inet6 fe80::f459:e7ff:fedb:8292/64 scope link 
       valid_lft forever preferred_lft forever

The same VXLAN domain is defined on the Nexus 1000V and a VM is attached
to it. When I send some broadcast traffic down vxlan0 (i.e. ping
10.1.1.2 which generates an ARP request) the VM sees the packet just
fine.

When I do it the other way around (the VM sends a broadcast ARP for
10.1.1.3) I see a packet coming into eth1 on the multicast group, but
vxlan0 stays silent. 

I have captured one of those packets, wireshark does not support
disecting it yet but in my eyes the packet is correct. I've put it
online at http://users.birkenwald.de/~berni/temp/vxlan.pcap

Weirdly enough, as soon as I populate the ARP and VXLAN forwarding table
by pinging back from the destination to the source (so the source can
learn both MAC->Nexthop for VXLAN and IP->MAC from the ARP request) it
starts working. 

To summarize, Multicast/Broadcast from N1k to Linux seems to be broken,
the encapsulated packet is seen on the Ethernet but the decapsulated
packet is not seen on vxlan0. Broadcast/Multicast in the other direction
works just fine as well as Unicast in both directions.

Thanks for any pointers,
Bernhard

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html