netdev - [net-next rfc v7 0/3] Multiqueue virtio-net

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1354011360-39479-1-git-send-email-jasowang@redhat.com>
Date:	Tue, 27 Nov 2012 18:15:57 +0800
From:	Jason Wang <jasowang@...hat.com>
To:	rusty@...tcorp.com.au, mst@...hat.com, krkumar2@...ibm.com,
	virtualization@...ts.linux-foundation.org, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc:	kvm@...r.kernel.org, bhutchings@...arflare.com,
	jwhan@...ewood.snu.ac.kr, shiyer@...hat.com,
	Jason Wang <jasowang@...hat.com>
Subject: [net-next rfc v7 0/3] Multiqueue virtio-net

Hi all:

This series is an update version of multiqueue virtio-net driver based on
Krishna Kumar's work to let virtio-net use multiple rx/tx queues to do the
packets reception and transmission. Please review and comments.

A protype implementation of qemu-kvm support could by found in
git://github.com/jasowang/qemu-kvm-mq.git. To start a guest with two queues, you
could specify the queues parameters to both tap and virtio-net like:

./qemu-kvm -netdev tap,queues=2,... -device virtio-net-pci,queues=2,...

then enable the multiqueue through ethtool by:

ethtool -L eth0 combined 2

Changes from V6:
- Align the implementation with the RFC spec update v5
- Addressing Rusty's comments:
  * split the patches
  * rename to max_queue_pairs and curr_queue_pairs
  * remove the useless status
  * fix the hibernation bug
- Addressing Ben's comments:
  * check other parameters in ethtool_set_queues

Changes from v5:
- Align the implementation with the RFC spec update v4
- Switch the mode between single mode and multiqueue mode without reset
- Remove the 256 limitation of queues
- Use helpers to do the mapping between virtqueues and tx/rx queues
- Use commbined channels instead of separated rx/tx queus when do the queue
number configuartion
- Other coding style comments from Michael

Changes from V4:
- Add ability to negotiate the number of queues through control virtqueue
- Ethtool -{L|l} support and default the tx/rx queue number to 1
- Expose the API to set irq affinity instead of irq itself

Changes from V3:
- Rebase to the net-next
- Let queue 2 to be the control virtqueue to obey the spec
- Prodives irq affinity
- Choose txq based on processor id

Reference:
- Virtio spec RFC: http://patchwork.ozlabs.org/patch/201303/
- V6: https://lkml.org/lkml/2012/10/30/127
- V5: http://lwn.net/Articles/505388/
- V4: https://lkml.org/lkml/2012/6/25/120
- V2: http://lwn.net/Articles/467283/


Perf Numbers:

Will do some basic test and post as a reply to this mail.

Jason Wang (3):
  virtio-net: separate fields of sending/receiving queue from
    virtnet_info
  virtio_net: multiqueue support
  virtio-net: change the number of queues through ethtool

 drivers/net/virtio_net.c        |  716 ++++++++++++++++++++++++++++-----------
 include/uapi/linux/virtio_net.h |   16 +
 2 files changed, 536 insertions(+), 196 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html