| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1354026482-10443-3-git-send-email-steve.glendinning@shawell.net>
Date: Tue, 27 Nov 2012 14:28:02 +0000
From: Steve Glendinning <steve.glendinning@...well.net>
To: netdev@...r.kernel.org
Cc: Steve Glendinning <steve.glendinning@...well.net>
Subject: [PATCH 2/2] smsc75xx: support PHY wakeup source
This patch enables LAN7500 family devices to wake from suspend
on either link up or link down events.
It also adds _nopm versions of mdio access functions, so we can
safely call them from suspend and resume functions
Signed-off-by: Steve Glendinning <steve.glendinning@...well.net>
---
drivers/net/usb/smsc75xx.c | 168 +++++++++++++++++++++++++++++++++++++++-----
1 file changed, 151 insertions(+), 17 deletions(-)
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 4655c01..8f92d81 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -54,7 +54,7 @@
#define USB_PRODUCT_ID_LAN7500 (0x7500)
#define USB_PRODUCT_ID_LAN7505 (0x7505)
#define RXW_PADDING 2
-#define SUPPORTED_WAKE (WAKE_UCAST | WAKE_BCAST | \
+#define SUPPORTED_WAKE (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
#define check_warn(ret, fmt, args...) \
@@ -185,14 +185,15 @@ static int smsc75xx_clear_feature(struct usbnet *dev, u32 feature)
/* Loop until the read is completed with timeout
* called with phy_mutex held */
-static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
+static __must_check int __smsc75xx_phy_wait_not_busy(struct usbnet *dev,
+ int in_pm)
{
unsigned long start_time = jiffies;
u32 val;
int ret;
do {
- ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
+ ret = __smsc75xx_read_reg(dev, MII_ACCESS, &val, in_pm);
check_warn_return(ret, "Error reading MII_ACCESS\n");
if (!(val & MII_ACCESS_BUSY))
@@ -202,7 +203,8 @@ static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
return -EIO;
}
-static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+static int __smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx,
+ int in_pm)
{
struct usbnet *dev = netdev_priv(netdev);
u32 val, addr;
@@ -211,7 +213,7 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
mutex_lock(&dev->phy_mutex);
/* confirm MII not busy */
- ret = smsc75xx_phy_wait_not_busy(dev);
+ ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read\n");
/* set the address, index & direction (read from PHY) */
@@ -220,13 +222,13 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
| MII_ACCESS_READ | MII_ACCESS_BUSY;
- ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
+ ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm);
check_warn_goto_done(ret, "Error writing MII_ACCESS\n");
- ret = smsc75xx_phy_wait_not_busy(dev);
+ ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
check_warn_goto_done(ret, "Timed out reading MII reg %02X\n", idx);
- ret = smsc75xx_read_reg(dev, MII_DATA, &val);
+ ret = __smsc75xx_read_reg(dev, MII_DATA, &val, in_pm);
check_warn_goto_done(ret, "Error reading MII_DATA\n");
ret = (u16)(val & 0xFFFF);
@@ -236,8 +238,8 @@ done:
return ret;
}
-static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
- int regval)
+static void __smsc75xx_mdio_write(struct net_device *netdev, int phy_id,
+ int idx, int regval, int in_pm)
{
struct usbnet *dev = netdev_priv(netdev);
u32 val, addr;
@@ -246,11 +248,11 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
mutex_lock(&dev->phy_mutex);
/* confirm MII not busy */
- ret = smsc75xx_phy_wait_not_busy(dev);
+ ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write\n");
val = regval;
- ret = smsc75xx_write_reg(dev, MII_DATA, val);
+ ret = __smsc75xx_write_reg(dev, MII_DATA, val, in_pm);
check_warn_goto_done(ret, "Error writing MII_DATA\n");
/* set the address, index & direction (write to PHY) */
@@ -259,16 +261,39 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
| MII_ACCESS_WRITE | MII_ACCESS_BUSY;
- ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
+ ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm);
check_warn_goto_done(ret, "Error writing MII_ACCESS\n");
- ret = smsc75xx_phy_wait_not_busy(dev);
+ ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
check_warn_goto_done(ret, "Timed out writing MII reg %02X\n", idx);
done:
mutex_unlock(&dev->phy_mutex);
}
+static int smsc75xx_mdio_read_nopm(struct net_device *netdev, int phy_id,
+ int idx)
+{
+ return __smsc75xx_mdio_read(netdev, phy_id, idx, 1);
+}
+
+static void smsc75xx_mdio_write_nopm(struct net_device *netdev, int phy_id,
+ int idx, int regval)
+{
+ __smsc75xx_mdio_write(netdev, phy_id, idx, regval, 1);
+}
+
+static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+{
+ return __smsc75xx_mdio_read(netdev, phy_id, idx, 0);
+}
+
+static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
+ int regval)
+{
+ __smsc75xx_mdio_write(netdev, phy_id, idx, regval, 0);
+}
+
static int smsc75xx_wait_eeprom(struct usbnet *dev)
{
unsigned long start_time = jiffies;
@@ -1232,6 +1257,32 @@ static int smsc75xx_enter_suspend0(struct usbnet *dev)
return 0;
}
+static int smsc75xx_enter_suspend1(struct usbnet *dev)
+{
+ u32 val;
+ int ret;
+
+ ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+ check_warn_return(ret, "Error reading PMT_CTL");
+
+ val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
+ val |= PMT_CTL_SUS_MODE_1;
+
+ ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+ check_warn_return(ret, "Error writing PMT_CTL");
+
+ /* clear wol status, enable energy detection */
+ val &= ~PMT_CTL_WUPS;
+ val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
+
+ ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+ check_warn_return(ret, "Error writing PMT_CTL");
+
+ smsc75xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
+
+ return 0;
+}
+
static int smsc75xx_enter_suspend2(struct usbnet *dev)
{
u32 val;
@@ -1249,18 +1300,61 @@ static int smsc75xx_enter_suspend2(struct usbnet *dev)
return 0;
}
+static int smsc75xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask)
+{
+ struct mii_if_info *mii = &dev->mii;
+ int ret;
+
+ netdev_dbg(dev->net, "enabling PHY wakeup interrupts");
+
+ /* read to clear */
+ ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
+ check_warn_return(ret, "Error reading PHY_INT_SRC");
+
+ /* enable interrupt source */
+ ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
+ check_warn_return(ret, "Error reading PHY_INT_MASK");
+
+ ret |= mask;
+
+ smsc75xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret);
+
+ return 0;
+}
+
+static int smsc75xx_link_ok_nopm(struct usbnet *dev)
+{
+ struct mii_if_info *mii = &dev->mii;
+ int ret;
+
+ /* first, a dummy read, needed to latch some MII phys */
+ ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+ check_warn_return(ret, "Error reading MII_BMSR");
+
+ ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+ check_warn_return(ret, "Error reading MII_BMSR");
+
+ return !!(ret & BMSR_LSTATUS);
+}
+
static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+ u32 val, link_up;
int ret;
- u32 val;
ret = usbnet_suspend(intf, message);
check_warn_return(ret, "usbnet_suspend error\n");
- /* if no wol options set, enter lowest power SUSPEND2 mode */
- if (!(pdata->wolopts & SUPPORTED_WAKE)) {
+ /* determine if link is up using only _nopm functions */
+ link_up = smsc75xx_link_ok_nopm(dev);
+
+ /* if no wol options set, or if link is down and we're not waking on
+ * PHY activity, enter lowest power SUSPEND2 mode
+ */
+ if (!(pdata->wolopts & SUPPORTED_WAKE) ||
+ !(link_up || (pdata->wolopts & WAKE_PHY))) {
netdev_info(dev->net, "entering SUSPEND2 mode\n");
/* disable energy detect (link up) & wake up events */
@@ -1283,6 +1377,33 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
return smsc75xx_enter_suspend2(dev);
}
+ if (pdata->wolopts & WAKE_PHY) {
+ ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
+ (PHY_INT_MASK_ANEG_COMP | PHY_INT_MASK_LINK_DOWN));
+ check_warn_return(ret, "error enabling PHY wakeup ints");
+
+ /* if link is down then configure EDPD and enter SUSPEND1,
+ * otherwise enter SUSPEND0 below
+ */
+ if (!link_up) {
+ struct mii_if_info *mii = &dev->mii;
+ netdev_info(dev->net, "entering SUSPEND1 mode");
+
+ /* enable energy detect power-down mode */
+ ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id,
+ PHY_MODE_CTRL_STS);
+ check_warn_return(ret, "Error reading PHY_MODE_CTRL_STS");
+
+ ret |= MODE_CTRL_STS_EDPWRDOWN;
+
+ smsc75xx_mdio_write_nopm(dev->net, mii->phy_id,
+ PHY_MODE_CTRL_STS, ret);
+
+ /* enter SUSPEND1 mode */
+ return smsc75xx_enter_suspend1(dev);
+ }
+ }
+
if (pdata->wolopts & (WAKE_MCAST | WAKE_ARP)) {
int i, filter = 0;
@@ -1349,6 +1470,19 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
check_warn_return(ret, "Error writing WUCSR\n");
+ if (pdata->wolopts & WAKE_PHY) {
+ netdev_info(dev->net, "enabling PHY wakeup\n");
+ ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+ check_warn_return(ret, "Error reading PMT_CTL");
+
+ /* clear wol status, enable energy detection */
+ val &= ~PMT_CTL_WUPS;
+ val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
+
+ ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+ check_warn_return(ret, "Error writing PMT_CTL");
+ }
+
if (pdata->wolopts & WAKE_MAGIC) {
netdev_info(dev->net, "enabling magic packet wakeup\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists