lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1354308680-9236-1-git-send-email-jogreene@redhat.com>
Date:	Fri, 30 Nov 2012 15:51:20 -0500
From:	John Greene <jogreene@...hat.com>
To:	netdev@...r.kernel.org
Cc:	John Greene <jogreene@...hat.com>,
	"David S. Miller" <davem@...emloft.net>
Subject: [RFT PATCH] 8139cp: properly support change of MTU values

The 8139cp driver has a change_mtu function that has not been
enabled since the dawn of the git repository. However, the
generic eth_change_mtu is not used in its place, so that
invalid MTU values can be set on the interface.

Original patch salvages the broken code for the single case of
setting the MTU while the interface is down, which is safe
and also includes the range check.  Now enhanced to support up
or down interface.

Original patch from
http://lkml.indiana.edu/hypermail/linux/kernel/1202.2/00770.html

Testing: has been test on virtual 8139cp setup without issue,
have no access real hardware 8139cp, need testing help.

Signed-off-by: "John Greene" <jogreene@...hat.com>
CC: "David S. Miller" <davem@...emloft.net>
---
 drivers/net/ethernet/realtek/8139cp.c | 22 +++-------------------
 1 file changed, 3 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 6cb96b4..7847c83 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -1226,12 +1226,9 @@ static void cp_tx_timeout(struct net_device *dev)
 	spin_unlock_irqrestore(&cp->lock, flags);
 }
 
-#ifdef BROKEN
 static int cp_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct cp_private *cp = netdev_priv(dev);
-	int rc;
-	unsigned long flags;
 
 	/* check for invalid MTU, according to hardware limits */
 	if (new_mtu < CP_MIN_MTU || new_mtu > CP_MAX_MTU)
@@ -1244,22 +1241,11 @@ static int cp_change_mtu(struct net_device *dev, int new_mtu)
 		return 0;
 	}
 
-	spin_lock_irqsave(&cp->lock, flags);
-
-	cp_stop_hw(cp);			/* stop h/w and free rings */
-	cp_clean_rings(cp);
-
+	/* network IS up, close it, reset MTU, and come up again. */
+	cp_close(dev);
 	dev->mtu = new_mtu;
-	cp_set_rxbufsize(cp);		/* set new rx buf size */
-
-	rc = cp_init_rings(cp);		/* realloc and restart h/w */
-	cp_start_hw(cp);
-
-	spin_unlock_irqrestore(&cp->lock, flags);
-
-	return rc;
+	return cp_open(dev);
 }
-#endif /* BROKEN */
 
 static const char mii_2_8139_map[8] = {
 	BasicModeCtrl,
@@ -1835,9 +1821,7 @@ static const struct net_device_ops cp_netdev_ops = {
 	.ndo_start_xmit		= cp_start_xmit,
 	.ndo_tx_timeout		= cp_tx_timeout,
 	.ndo_set_features	= cp_set_features,
-#ifdef BROKEN
 	.ndo_change_mtu		= cp_change_mtu,
-#endif
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= cp_poll_controller,
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ