| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 1 Dec 2012 03:53:32 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Carolyn Wyborny <carolyn.wyborny@...el.com>,
netdev@...r.kernel.org, gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 4/9] igb: Refactoring of i210 file.
From: Carolyn Wyborny <carolyn.wyborny@...el.com>
This patch refactors the functions in e1000_i210.c in order to remove need
for prototypes.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igb/e1000_i210.c | 243 ++++++++++++++--------------
1 file changed, 119 insertions(+), 124 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 239650e..fbcdbeb 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -35,11 +35,42 @@
#include "e1000_hw.h"
#include "e1000_i210.h"
-static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw);
-static void igb_put_hw_semaphore_i210(struct e1000_hw *hw);
-static s32 igb_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data);
-static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw);
+/**
+ * igb_get_hw_semaphore_i210 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ */
+static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 ret_val = E1000_SUCCESS;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ igb_put_hw_semaphore(hw);
+ hw_dbg("Driver can't access the NVM\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
/**
* igb_acquire_nvm_i210 - Request for access to EEPROM
@@ -68,6 +99,23 @@ void igb_release_nvm_i210(struct e1000_hw *hw)
}
/**
+ * igb_put_hw_semaphore_i210 - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ */
+static void igb_put_hw_semaphore_i210(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = rd32(E1000_SWSM);
+
+ swsm &= ~E1000_SWSM_SWESMBI;
+
+ wr32(E1000_SWSM, swsm);
+}
+
+/**
* igb_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
@@ -138,60 +186,6 @@ void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
}
/**
- * igb_get_hw_semaphore_i210 - Acquire hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Acquire the HW semaphore to access the PHY or NVM
- **/
-static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
-{
- u32 swsm;
- s32 ret_val = E1000_SUCCESS;
- s32 timeout = hw->nvm.word_size + 1;
- s32 i = 0;
-
- /* Get the FW semaphore. */
- for (i = 0; i < timeout; i++) {
- swsm = rd32(E1000_SWSM);
- wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
-
- /* Semaphore acquired if bit latched */
- if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
- break;
-
- udelay(50);
- }
-
- if (i == timeout) {
- /* Release semaphores */
- igb_put_hw_semaphore(hw);
- hw_dbg("Driver can't access the NVM\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_put_hw_semaphore_i210 - Release hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Release hardware semaphore used to access the PHY or NVM
- **/
-static void igb_put_hw_semaphore_i210(struct e1000_hw *hw)
-{
- u32 swsm;
-
- swsm = rd32(E1000_SWSM);
-
- swsm &= ~E1000_SWSM_SWESMBI;
-
- wr32(E1000_SWSM, swsm);
-}
-
-/**
* igb_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register
* @hw: pointer to the HW structure
* @offset: offset of word in the Shadow Ram to read
@@ -229,49 +223,6 @@ s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
}
/**
- * igb_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR
- * @hw: pointer to the HW structure
- * @offset: offset within the Shadow RAM to be written to
- * @words: number of words to write
- * @data: 16 bit word(s) to be written to the Shadow RAM
- *
- * Writes data to Shadow RAM at offset using EEWR register.
- *
- * If e1000_update_nvm_checksum is not called after this function , the
- * data will not be committed to FLASH and also Shadow RAM will most likely
- * contain an invalid checksum.
- *
- * If error code is returned, data and Shadow RAM may be inconsistent - buffer
- * partially written.
- **/
-s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- s32 status = E1000_SUCCESS;
- u16 i, count;
-
- /* We cannot hold synchronization semaphores for too long,
- * because of forceful takeover procedure. However it is more efficient
- * to write in bursts than synchronizing access for each word. */
- for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
- count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
- E1000_EERD_EEWR_MAX_COUNT : (words - i);
- if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
- status = igb_write_nvm_srwr(hw, offset, count,
- data + i);
- hw->nvm.ops.release(hw);
- } else {
- status = E1000_ERR_SWFW_SYNC;
- }
-
- if (status != E1000_SUCCESS)
- break;
- }
-
- return status;
-}
-
-/**
* igb_write_nvm_srwr - Write to Shadow Ram using EEWR
* @hw: pointer to the HW structure
* @offset: offset within the Shadow Ram to be written to
@@ -329,6 +280,50 @@ out:
}
/**
+ * igb_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR
+ * @hw: pointer to the HW structure
+ * @offset: offset within the Shadow RAM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the Shadow RAM
+ *
+ * Writes data to Shadow RAM at offset using EEWR register.
+ *
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * data will not be committed to FLASH and also Shadow RAM will most likely
+ * contain an invalid checksum.
+ *
+ * If error code is returned, data and Shadow RAM may be inconsistent - buffer
+ * partially written.
+ */
+s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 status = E1000_SUCCESS;
+ u16 i, count;
+
+ /* We cannot hold synchronization semaphores for too long,
+ * because of forceful takeover procedure. However it is more efficient
+ * to write in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
+ count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
+ E1000_EERD_EEWR_MAX_COUNT : (words - i);
+ if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
+ status = igb_write_nvm_srwr(hw, offset, count,
+ data + i);
+ hw->nvm.ops.release(hw);
+ } else {
+ status = E1000_ERR_SWFW_SYNC;
+ }
+
+ if (status != E1000_SUCCESS)
+ break;
+ }
+
+ return status;
+}
+
+/**
* igb_read_nvm_i211 - Read NVM wrapper function for I211
* @hw: pointer to the HW structure
* @address: the word address (aka eeprom offset) to read
@@ -637,6 +632,28 @@ out:
}
/**
+ * igb_pool_flash_update_done_i210 - Pool FLUDONE status.
+ * @hw: pointer to the HW structure
+ *
+ */
+static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_NVM;
+ u32 i, reg;
+
+ for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
+ reg = rd32(E1000_EECD);
+ if (reg & E1000_EECD_FLUDONE_I210) {
+ ret_val = E1000_SUCCESS;
+ break;
+ }
+ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
* igb_update_flash_i210 - Commit EEPROM to the flash
* @hw: pointer to the HW structure
*
@@ -666,28 +683,6 @@ out:
}
/**
- * igb_pool_flash_update_done_i210 - Pool FLUDONE status.
- * @hw: pointer to the HW structure
- *
- **/
-s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw)
-{
- s32 ret_val = -E1000_ERR_NVM;
- u32 i, reg;
-
- for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
- reg = rd32(E1000_EECD);
- if (reg & E1000_EECD_FLUDONE_I210) {
- ret_val = E1000_SUCCESS;
- break;
- }
- udelay(5);
- }
-
- return ret_val;
-}
-
-/**
* igb_valid_led_default_i210 - Verify a valid default LED config
* @hw: pointer to the HW structure
* @data: pointer to the NVM (EEPROM)
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists