netdev - [PATCH net-next 05/13] bnx2x: Correct advertised speed/duplex

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sun, 2 Dec 2012 16:05:49 +0200
From:	"Yuval Mintz" <yuvalmin@...adcom.com>
To:	davem@...emloft.net, netdev@...r.kernel.org
cc:	eilong@...adcom.com, ariele@...adcom.com,
	"Yuval Mintz" <yuvalmin@...adcom.com>
Subject: [PATCH net-next 05/13] bnx2x: Correct advertised speed/duplex

If link is down due to management (and not due to actual phy link being lost),
driver should still behave as if the link is down; Querying via ethtool about
speed/duplex state should result in 'UNKNOWN' (same behaviour as when link is
actually down).

Signed-off-by: Yuval Mintz <yuvalmin@...adcom.com>
Signed-off-by: Eilon Greenstein <eilong@...adcom.com>
---
 .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c    |   12 ++++--------
 1 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index c7270c0..277f17e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -231,18 +231,14 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cmd->advertising &= ~(ADVERTISED_10000baseT_Full);
 	}
 
-	if ((bp->state == BNX2X_STATE_OPEN) && (bp->link_vars.link_up)) {
-		if (!(bp->flags & MF_FUNC_DIS)) {
-			ethtool_cmd_speed_set(cmd, bp->link_vars.line_speed);
+	if ((bp->state == BNX2X_STATE_OPEN) && bp->link_vars.link_up &&
+	    !(bp->flags & MF_FUNC_DIS)) {
 			cmd->duplex = bp->link_vars.duplex;
-		} else {
-			ethtool_cmd_speed_set(
-				cmd, bp->link_params.req_line_speed[cfg_idx]);
-			cmd->duplex = bp->link_params.req_duplex[cfg_idx];
-		}
 
 		if (IS_MF(bp) && !BP_NOMCP(bp))
 			ethtool_cmd_speed_set(cmd, bnx2x_get_mf_speed(bp));
+		else
+			ethtool_cmd_speed_set(cmd, bp->link_vars.line_speed);
 	} else {
 		cmd->duplex = DUPLEX_UNKNOWN;
 		ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
-- 
1.7.1


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html