| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20121210145112.GB23628@hmsreliant.think-freely.org>
Date: Mon, 10 Dec 2012 09:51:12 -0500
From: Neil Horman <nhorman@...driver.com>
To: Ying Xue <ying.xue@...driver.com>
Cc: Paul.Gortmaker@...driver.com, jon.maloy@...csson.com,
erik.hugne@...csson.com, netdev@...r.kernel.org,
tipc-discussion@...ts.sourceforge.net
Subject: Re: [PATCH net-next v3] tipc: sk_recv_queue size check only for
connectionless sockets
On Mon, Dec 10, 2012 at 05:23:00PM +0800, Ying Xue wrote:
> The sk_receive_queue limit control is currently performed for all
> arriving messages, disregarding socket and message type. But for
> connectionless sockets this check is redundant, since the protocol
> flow already makes queue overflow impossible.
>
> We move the sk_receive_queue limit control so that it's only performed
> for connectionless sockets, i.e. SOCK_RDM and SOCK_DGRAM type sockets.
>
> However, as Neil Horman specified, we cannot simply force the socket
> receive queue limit against connectionless sockets as it may create a
> DoS vulnerability. For example, if a sender floods a receiver with
> messages containing an invalid set of message importance bits or
> CRITICAL importance, we will queue messages indefinitely.
>
> To avoid DoS attack, socket receive queue will be marked as overflow
> if we receive messages with invalid message importances, meanwhile,
> we also set one new threshold for CRITICAL importance messages.
>
> Signed-off-by: Ying Xue <ying.xue@...driver.com>
> Signed-off-by: Jon Maloy <jon.maloy@...csson.com>
> Cc: Neil Horman <nhorman@...driver.com>
> Signed-off-by: Paul Gortmaker <paul.gortmaker@...driver.com>
> ---
> v3 changes:
> - set new threshold for CRITICAL message
> - defined an importance factor table to avoid multiplication and
> division operations in rx_queue_full().
> - changed return value of rx_queue_full() from integer to boolean.
>
> net/tipc/socket.c | 44 +++++++++++++++++++-------------------------
> 1 files changed, 19 insertions(+), 25 deletions(-)
>
> diff --git a/net/tipc/socket.c b/net/tipc/socket.c
> index 9b4e483..a18a757 100644
> --- a/net/tipc/socket.c
> +++ b/net/tipc/socket.c
> @@ -43,7 +43,7 @@
> #define SS_LISTENING -1 /* socket is listening */
> #define SS_READY -2 /* socket is connectionless */
>
> -#define OVERLOAD_LIMIT_BASE 10000
> +#define OVERLOAD_LIMIT_BASE 5000
> #define CONN_TIMEOUT_DEFAULT 8000 /* default connect timeout = 8s */
>
> struct tipc_sock {
> @@ -73,6 +73,13 @@ static struct proto tipc_proto;
>
> static int sockets_enabled;
>
> +static const u32 msg_importance_factor[] = {
> + OVERLOAD_LIMIT_BASE, /* TIPC_LOW_IMPORTANCE limit */
> + OVERLOAD_LIMIT_BASE * 2, /* TIPC_MEDIUM_IMPORTANCE limit */
> + OVERLOAD_LIMIT_BASE * 100, /* TIPC_HIGH_IMPORTANCE limit */
> + OVERLOAD_LIMIT_BASE * 200 /* TIPC_CRITICAL_IMPORTANCE limit */
> + };
> +
> /*
> * Revised TIPC socket locking policy:
> *
> @@ -1158,28 +1165,17 @@ static void tipc_data_ready(struct sock *sk, int len)
> * rx_queue_full - determine if receive queue can accept another message
> * @msg: message to be added to queue
> * @queue_size: current size of queue
> - * @base: nominal maximum size of queue
> *
> - * Returns 1 if queue is unable to accept message, 0 otherwise
> + * Returns true if queue is unable to accept message, false otherwise
> */
> -static int rx_queue_full(struct tipc_msg *msg, u32 queue_size, u32 base)
> +static bool rx_queue_full(struct tipc_msg *msg, u32 queue_size)
> {
> - u32 threshold;
> u32 imp = msg_importance(msg);
>
> - if (imp == TIPC_LOW_IMPORTANCE)
> - threshold = base;
> - else if (imp == TIPC_MEDIUM_IMPORTANCE)
> - threshold = base * 2;
> - else if (imp == TIPC_HIGH_IMPORTANCE)
> - threshold = base * 100;
> - else
> - return 0;
> + if (unlikely(imp > TIPC_CRITICAL_IMPORTANCE))
> + return true;
>
> - if (msg_connected(msg))
> - threshold *= 4;
> -
> - return queue_size >= threshold;
> + return queue_size >= msg_importance_factor[imp];
> }
>
> /**
> @@ -1275,7 +1271,6 @@ static u32 filter_rcv(struct sock *sk, struct sk_buff *buf)
> {
> struct socket *sock = sk->sk_socket;
> struct tipc_msg *msg = buf_msg(buf);
> - u32 recv_q_len;
> u32 res = TIPC_OK;
>
> /* Reject message if it is wrong sort of message for socket */
> @@ -1285,19 +1280,18 @@ static u32 filter_rcv(struct sock *sk, struct sk_buff *buf)
> if (sock->state == SS_READY) {
> if (msg_connected(msg))
> return TIPC_ERR_NO_PORT;
> + /* Reject SOCK_DGRAM and SOCK_RDM message if there isn't room
> + * to queue it
> + */
> + if (unlikely(rx_queue_full(msg,
> + skb_queue_len(&sk->sk_receive_queue))))
> + return TIPC_ERR_OVERLOAD;
> } else {
> res = filter_connect(tipc_sk(sk), &buf);
> if (res != TIPC_OK || buf == NULL)
> return res;
> }
>
> - /* Reject message if there isn't room to queue it */
> - recv_q_len = skb_queue_len(&sk->sk_receive_queue);
> - if (unlikely(recv_q_len >= (OVERLOAD_LIMIT_BASE / 2))) {
> - if (rx_queue_full(msg, recv_q_len, OVERLOAD_LIMIT_BASE / 2))
> - return TIPC_ERR_OVERLOAD;
> - }
> -
> /* Enqueue message (finally!) */
> TIPC_SKB_CB(buf)->handle = 0;
> __skb_queue_tail(&sk->sk_receive_queue, buf);
> --
> 1.7.1
>
>
That looks more reasonable, thanks.
Acked-by: Neil Horman <nhorman@...driver.com>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists