[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20121219082727.GB1637@minipsycho.orion>
Date: Wed, 19 Dec 2012 09:27:27 +0100
From: Jiri Pirko <jiri@...nulli.us>
To: Vlad Yasevich <vyasevic@...hat.com>
Cc: netdev@...r.kernel.org, shemminger@...tta.com, davem@...emloft.net,
or.gerlitz@...il.com, jhs@...atatu.com, mst@...hat.com
Subject: Re: [PATCH V2 00/12] Add basic VLAN support to bridges
Tue, Dec 18, 2012 at 11:46:21PM CET, vyasevic@...hat.com wrote:
>On 12/18/2012 05:32 PM, Jiri Pirko wrote:
>>
>>
>>I see that this patchset replicates a lot of code which is already
>>present in net/8021q/ or include/linux/if_vlan.h. I think it would
>>be nice to move this code into some "common" place, wouldn't it?
>>
>
>The only replication that I am aware of is in br_vlan_untag(). I
>thought about pulling that piece out, but I think there is a reason
>why it's not available when 801q support isn't turned on. I noted that
>openvswitch implemented its own vlan header manipulation functions as well.
openvswitch should use the "common" code as well.
>
>What else are you seeing that's duplicate?
For example I spotted check of ndo_vlan_rx_[add/kill]_vid and
NETIF_F_HW_VLAN_FILTER and ndo_vlan_rx_[add/kill]_vid call
>
>-vlad
>
>>Jiri
>>
>>Tue, Dec 18, 2012 at 08:00:51PM CET, vyasevic@...hat.com wrote:
>>>This series of patches provides an ability to add VLANs to the bridge
>>>ports. This is similar to what can be found in most switches. The bridge
>>>port may have any number of VLANs added to it including vlan 0 priority tagged
>>>traffic. When vlans are added to the port, only traffic tagged with particular
>>>vlan will forwarded over this port. Additionally, vlan ids are added to FDB
>>>entries and become part of the lookup. This way we correctly identify the FDB
>>>entry.
>>>
>>>A single vlan may also be designated as untagged. Any untagged traffic
>>>recieved by the port will be assigned to this vlan. Any traffic exiting
>>>the port with a VID matching the untagged vlan will exit untagged (the
>>>bridge will strip the vlan header). This is similar to "Native Vlan" support
>>>available in most switches.
>>>
>>>The default behavior ofthe bridge is unchanged if no vlans have been
>>>configured.
>>>
>>>Changes since v1:
>>>- Fixed some forwarding bugs.
>>>- Add vlan to local fdb entries. New local entries are created per vlan
>>> to facilite correct forwarding to bridge interface.
>>>- Allow configuration of vlans directly on the bridge master device
>>> in addition to ports.
>>>
>>>Changes since rfc v2:
>>>- Per-port vlan bitmap is gone and is replaced with a vlan list.
>>>- Added bridge vlan list, which is referenced by each port. Entries in
>>> the birdge vlan list have port bitmap that shows which port are parts
>>> of which vlan.
>>>- Netlink API changes.
>>>- Dropped sysfs support for now. If people think this is really usefull,
>>> can add it back.
>>>- Support for native/untagged vlans.
>>>
>>>Changes since rfc v1:
>>>- Comments addressed regarding formatting and RCU usage
>>>- iocts have been removed and changed over the netlink interface.
>>>- Added support of user added ndb entries.
>>>- changed sysfs interface to export a bitmap. Also added a write interface.
>>> I am not sure how much I like it, but it made my testing easier/faster. I
>>> might change the write interface to take text instead of binary.
>>>
>>>
>>>Vlad Yasevich (12):
>>> bridge: Add vlan filtering infrastructure
>>> bridge: Validate that vlan is permitted on ingress
>>> bridge: Verify that a vlan is allowed to egress on give port
>>> bridge: Cache vlan in the cb for faster egress lookup.
>>> bridge: Add vlan to unicast fdb entries
>>> bridge: Add vlan id to multicast groups
>>> bridge: Add netlink interface to configure vlans on bridge ports
>>> bridge: Add vlan support to static neighbors
>>> bridge: Add the ability to configure untagged vlans
>>> bridge: Implement untagged vlan handling
>>> bridge: Dump vlan information from a bridge port
>>> bridge: Add vlan support for local fdb entries
>>>
>>>drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 5 +-
>>>drivers/net/macvlan.c | 2 +-
>>>drivers/net/vxlan.c | 3 +-
>>>include/linux/netdevice.h | 4 +-
>>>include/uapi/linux/if_bridge.h | 23 ++-
>>>include/uapi/linux/neighbour.h | 1 +
>>>include/uapi/linux/rtnetlink.h | 1 +
>>>net/bridge/br_device.c | 34 ++-
>>>net/bridge/br_fdb.c | 253 ++++++++++++---
>>>net/bridge/br_forward.c | 160 ++++++++++
>>>net/bridge/br_if.c | 404 ++++++++++++++++++++++++-
>>>net/bridge/br_input.c | 65 ++++-
>>>net/bridge/br_multicast.c | 71 +++--
>>>net/bridge/br_netlink.c | 178 ++++++++++--
>>>net/bridge/br_private.h | 71 ++++-
>>>net/core/rtnetlink.c | 40 ++-
>>>16 files changed, 1190 insertions(+), 125 deletions(-)
>>>
>>>--
>>>1.7.7.6
>>>
>>>--
>>>To unsubscribe from this list: send the line "unsubscribe netdev" in
>>>the body of a message to majordomo@...r.kernel.org
>>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists