[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20701.45196.361432.80622@ipc1.ka-ro>
Date: Fri, 28 Dec 2012 15:45:32 +0100
From: Lothar Waßmann <LW@...O-electronics.de>
To: Frank Li <Frank.Li@...escale.com>
Cc: <lznuaa@...il.com>, <davem@...emloft.net>,
<s.hauer@...gutronix.de>, netdev@...r.kernel.org,
shawn.guo@...aro.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 1/1 net-next] NET: FEC: dynamtic check DMA desc buff type
Frank Li writes:
> MX6 and mx28 support enhanced DMA descript buff to support 1588
> ptp. But MX25, MX3x, MX5x can't support enhanced DMA descript buff.
> Check fec type and choose correct DAM descript buff type.
^^^
s/DAM/DMA/
s/descript/descriptor/g
[...]
> diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
> index 0704bca..290f91c 100644
> --- a/drivers/net/ethernet/freescale/fec.c
> +++ b/drivers/net/ethernet/freescale/fec.c
> @@ -76,6 +76,8 @@
> #define FEC_QUIRK_USE_GASKET (1 << 2)
> /* Controller has GBIT support */
> #define FEC_QUIRK_HAS_GBIT (1 << 3)
> +/* Controller has extend desc buffer */
> +#define FEC_QUICK_HAS_BUFDESC_EX (1 << 4)
^^^^^
As Sascha has already pointed out, this should be 'QUIRK' rather than
'QUICK' (like in the preceeding lines)!
> static struct platform_device_id fec_devtype[] = {
> {
> @@ -93,7 +95,8 @@ static struct platform_device_id fec_devtype[] = {
> .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
> }, {
> .name = "imx6q-fec",
> - .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT,
> + .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
> + FEC_QUICK_HAS_BUFDESC_EX,
^^^^^
same as above.
[...]
> @@ -1574,6 +1617,8 @@ fec_probe(struct platform_device *pdev)
> fep->pdev = pdev;
> fep->dev_id = dev_id++;
>
> + fep->bufdesc_ex = 0;
> +
> if (!fep->hwp) {
> ret = -ENOMEM;
> goto failed_ioremap;
> @@ -1628,19 +1673,19 @@ fec_probe(struct platform_device *pdev)
> goto failed_clk;
> }
>
> -#ifdef CONFIG_FEC_PTP
> fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
> + fep->bufdesc_ex =
> + pdev->id_entry->driver_data & FEC_QUICK_HAS_BUFDESC_EX;
^^^^^
same as above.
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@...o-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists