netdev - Re: [PATCH v3 1/1 net-next] NET: FEC: dynamtic check DMA desc buff type

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 4 Jan 2013 14:09:17 +0100
From:	Sascha Hauer <s.hauer@...gutronix.de>
To:	Frank Li <Frank.Li@...escale.com>
Cc:	lznuaa@...il.com, davem@...emloft.net,
	linux-arm-kernel@...ts.infradead.org, shawn.guo@...aro.org,
	netdev@...r.kernel.org
Subject: Re: [PATCH v3 1/1 net-next] NET: FEC: dynamtic check DMA desc buff
 type

On Fri, Jan 04, 2013 at 10:04:23AM +0800, Frank Li wrote:
> MX6 and mx28 support enhanced DMA descriptor buff to support 1588
> ptp. But MX25, MX3x, MX5x can't support enhanced DMA descriptor buff.
> Check fec type and choose correct DMA descriptor buff type.
> 
> Remove static config CONFIG_FEC_PTP.
> ptp function will be auto detected.
> 
> Signed-off-by: Frank Li <Frank.Li@...escale.com>

Two minor comments, otherwise:

Acked-by: Sascha Hauer <s.hauer@...gutronix.de>

> @@ -1574,6 +1617,8 @@ fec_probe(struct platform_device *pdev)
>  	fep->pdev = pdev;
>  	fep->dev_id = dev_id++;
>  
> +	fep->bufdesc_ex = 0;
> +

fep already is zeroed, so this is unnecessary.

>  	if (!fep->hwp) {
>  		ret = -ENOMEM;
>  		goto failed_ioremap;
> @@ -1628,19 +1673,19 @@ fec_probe(struct platform_device *pdev)
>  		goto failed_clk;
>  	}
>  
> -#ifdef CONFIG_FEC_PTP
>  	fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
> +	fep->bufdesc_ex =
> +		pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;
>  	if (IS_ERR(fep->clk_ptp)) {
>  		ret = PTR_ERR(fep->clk_ptp);
> -		goto failed_clk;
> +		fep->bufdesc_ex = 0;
>  	}

Since you remove the goto you can remove the 'ret =' aswell.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html