| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1357582618-17183-2-git-send-email-paul.gortmaker@windriver.com> Date: Mon, 7 Jan 2013 13:16:58 -0500 From: Paul Gortmaker <paul.gortmaker@...driver.com> To: David Miller <davem@...emloft.net> Cc: netdev@...r.kernel.org, Paul Gortmaker <paul.gortmaker@...driver.com> Subject: [PATCH net-next 1/1] drivers/net: delete 8390 based EISA drivers. The NS8390 chip was essentially the 1st widespread PC ethernet chip, starting its life on 8 bit ISA cards in the late 1980s. Even with better technologies available (bus mastering etc) the 8390 managed to get used on a few rare EISA cards in the early to mid 1990s. The EISA bus in the x86 world was largely confined to systems ranging from 486 to 586 (essentially 200MHz or lower, and less than 100MB RAM) -- i.e. machines unlikely to be still in service, and even less likely to be running a 3.9+ kernel. On top of that, only one of the five really ever was considered non-experimental; the smc-ultra32 was the one -- since it was largely just an EISA version of the popular smc-ultra ISA card. All the others had such a tiny user base that they simply never could be considered anything more than experimental. Signed-off-by: Paul Gortmaker <paul.gortmaker@...driver.com> --- drivers/net/ethernet/8390/Kconfig | 66 +---- drivers/net/ethernet/8390/Makefile | 5 - drivers/net/ethernet/8390/ac3200.c | 431 ----------------------------- drivers/net/ethernet/8390/es3210.c | 445 ------------------------------ drivers/net/ethernet/8390/lne390.c | 433 ----------------------------- drivers/net/ethernet/8390/ne3210.c | 346 ------------------------ drivers/net/ethernet/8390/smc-ultra32.c | 463 -------------------------------- 7 files changed, 2 insertions(+), 2187 deletions(-) delete mode 100644 drivers/net/ethernet/8390/ac3200.c delete mode 100644 drivers/net/ethernet/8390/es3210.c delete mode 100644 drivers/net/ethernet/8390/lne390.c delete mode 100644 drivers/net/ethernet/8390/ne3210.c delete mode 100644 drivers/net/ethernet/8390/smc-ultra32.c diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index 8801217..e49a442 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -6,7 +6,7 @@ config NET_VENDOR_8390 bool "National Semi-conductor 8390 devices" default y depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \ - ISA || EISA || MAC || M32R || MACH_TX49XX || \ + ISA || MAC || M32R || MACH_TX49XX || \ H8300 || ARM || MIPS || ZORRO || PCMCIA || \ EXPERIMENTAL) ---help--- @@ -33,18 +33,6 @@ config EL2 To compile this driver as a module, choose M here. The module will be called 3c503. -config AC3200 - tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" - depends on PCI && (ISA || EISA) && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called ac3200. - config PCMCIA_AXNET tristate "Asix AX88190 PCMCIA support" depends on PCMCIA @@ -86,18 +74,6 @@ config E2100 To compile this driver as a module, choose M here. The module will be called e2100. -config ES3210 - tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" - depends on PCI && EISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called es3210. - config HPLAN_PLUS tristate "HP PCLAN+ (27247B and 27252A) support" depends on ISA @@ -140,18 +116,6 @@ config ARM_ETHERH If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. -config LNE390 - tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" - depends on PCI && EISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called lne390. - config MAC8390 bool "Macintosh NS 8390 based ethernet cards" depends on MAC @@ -187,8 +151,7 @@ config NE2000 without a specific driver are compatible with NE2000. If you have a PCI NE2000 card however, say N here and Y to "PCI - NE2000 and clone support" under "EISA, VLB, PCI and on board - controllers" below. + NE2000 and clone support" below. To compile this driver as a module, choose M here. The module will be called ne. @@ -223,19 +186,6 @@ config APNE To compile this driver as a module, choose M here: the module will be called apne. -config NE3210 - tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" - depends on PCI && EISA && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Note that this driver - will NOT WORK for NE3200 cards as they are completely different. - - To compile this driver as a module, choose M here. The module - will be called ne3210. - config PCMCIA_PCNET tristate "NE2000 compatible PCMCIA support" depends on PCMCIA @@ -285,18 +235,6 @@ config ULTRA To compile this driver as a module, choose M here. The module will be called smc-ultra. -config ULTRA32 - tristate "SMC Ultra32 EISA support" - depends on EISA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called smc-ultra32. - config WD80x3 tristate "WD80*3 support" depends on ISA diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile index 8fb462c..e8bb97c 100644 --- a/drivers/net/ethernet/8390/Makefile +++ b/drivers/net/ethernet/8390/Makefile @@ -3,26 +3,21 @@ # obj-$(CONFIG_MAC8390) += mac8390.o -obj-$(CONFIG_AC3200) += ac3200.o 8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_ARM_ETHERH) += etherh.o obj-$(CONFIG_AX88796) += ax88796.o obj-$(CONFIG_E2100) += e2100.o 8390.o obj-$(CONFIG_EL2) += 3c503.o 8390p.o -obj-$(CONFIG_ES3210) += es3210.o 8390.o obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o obj-$(CONFIG_HYDRA) += hydra.o 8390.o -obj-$(CONFIG_LNE390) += lne390.o 8390.o obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o -obj-$(CONFIG_NE3210) += ne3210.o 8390.o obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o obj-$(CONFIG_STNIC) += stnic.o 8390.o obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o -obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o obj-$(CONFIG_WD80x3) += wd.o 8390.o obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o diff --git a/drivers/net/ethernet/8390/ac3200.c b/drivers/net/ethernet/8390/ac3200.c deleted file mode 100644 index ccf0794..0000000 diff --git a/drivers/net/ethernet/8390/es3210.c b/drivers/net/ethernet/8390/es3210.c deleted file mode 100644 index ba1b5c9..0000000 diff --git a/drivers/net/ethernet/8390/lne390.c b/drivers/net/ethernet/8390/lne390.c deleted file mode 100644 index 479409b..0000000 diff --git a/drivers/net/ethernet/8390/ne3210.c b/drivers/net/ethernet/8390/ne3210.c deleted file mode 100644 index ebcdb52..0000000 diff --git a/drivers/net/ethernet/8390/smc-ultra32.c b/drivers/net/ethernet/8390/smc-ultra32.c deleted file mode 100644 index 923e42a..0000000 -- 1.8.1 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists