| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1358422519-20981-4-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Thu, 17 Jan 2013 03:35:08 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Bruce Allan <bruce.w.allan@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 03/14] e1000e: add support for hardware timestamping on some devices
From: Bruce Allan <bruce.w.allan@...el.com>
On 82574, 82583, 82579, I217 and I218 add support for hardware time
stamping of all or no Rx packets and Tx packets which have the
SKBTX_HW_TSTAMP flag set. Update the .get_ts_info ethtool operation to
report the supported time stamping modes, and enable and disable hardware
time stamping with the SIOCSHWTSTAMP ioctl.
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/e1000e/82571.c | 2 +
drivers/net/ethernet/intel/e1000e/defines.h | 14 ++
drivers/net/ethernet/intel/e1000e/e1000.h | 46 +++-
drivers/net/ethernet/intel/e1000e/ethtool.c | 25 +-
drivers/net/ethernet/intel/e1000e/hw.h | 10 +
drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +
drivers/net/ethernet/intel/e1000e/netdev.c | 371 +++++++++++++++++++++++++++-
7 files changed, 462 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index c77d010..587890d 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -2044,6 +2044,7 @@ const struct e1000_info e1000_82574_info = {
| FLAG_HAS_MSIX
| FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
| FLAG_APME_IN_CTRL3
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
@@ -2065,6 +2066,7 @@ const struct e1000_info e1000_82583_info = {
.mac = e1000_82583,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
| FLAG_APME_IN_CTRL3
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 3041a54..36f9fad 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -107,6 +107,7 @@
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */
#define E1000_RXDEXT_STATERR_CE 0x01000000
#define E1000_RXDEXT_STATERR_SE 0x02000000
#define E1000_RXDEXT_STATERR_SEQ 0x04000000
@@ -318,6 +319,7 @@
#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */
/* Transmit Control */
#define E1000_TCTL_EN 0x00000002 /* enable Tx */
@@ -536,6 +538,18 @@
#define E1000_RXCW_C 0x20000000 /* Receive config */
#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_ALL 0x08
+#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */
+
+#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */
+#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */
+#define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */
+
+#define E1000_TIMINCA_INCPERIOD_SHIFT 24
+#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF
+
/* PCI Express Control */
#define E1000_GCR_RXD_NO_SNOOP 0x00000001
#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index b89b181..dea9e55 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -41,6 +41,8 @@
#include <linux/pci-aspm.h>
#include <linux/crc32.h>
#include <linux/if_vlan.h>
+#include <linux/clocksource.h>
+#include <linux/net_tstamp.h>
#include "hw.h"
@@ -353,6 +355,7 @@ struct e1000_adapter {
u64 gorc_old;
u32 alloc_rx_buff_failed;
u32 rx_dma_failed;
+ u32 rx_hwtstamp_cleared;
unsigned int rx_ps_pages;
u16 rx_ps_bsize0;
@@ -402,6 +405,14 @@ struct e1000_adapter {
u16 tx_ring_count;
u16 rx_ring_count;
+
+ struct hwtstamp_config hwtstamp_config;
+ struct delayed_work systim_overflow_work;
+ struct sk_buff *tx_hwtstamp_skb;
+ struct work_struct tx_hwtstamp_work;
+ spinlock_t systim_lock; /* protects SYSTIML/H regsters */
+ struct cyclecounter cc;
+ struct timecounter tc;
};
struct e1000_info {
@@ -416,6 +427,38 @@ struct e1000_info {
const struct e1000_nvm_operations *nvm_ops;
};
+/* The system time is maintained by a 64-bit counter comprised of the 32-bit
+ * SYSTIMH and SYSTIML registers. How the counter increments (and therefore
+ * its resolution) is based on the contents of the TIMINCA register - it
+ * increments every incperiod (bits 31:24) clock ticks by incvalue (bits 23:0).
+ * For the best accuracy, the incperiod should be as small as possible. The
+ * incvalue is scaled by a factor as large as possible (while still fitting
+ * in bits 23:0) so that relatively small clock corrections can be made.
+ *
+ * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of
+ * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n)
+ * bits to count nanoseconds leaving the rest for fractional nonseconds.
+ */
+#define INCVALUE_96MHz 125
+#define INCVALUE_SHIFT_96MHz 17
+#define INCPERIOD_SHIFT_96MHz 2
+#define INCPERIOD_96MHz (12 >> INCPERIOD_SHIFT_96MHz)
+
+#define INCVALUE_25MHz 40
+#define INCVALUE_SHIFT_25MHz 18
+#define INCPERIOD_25MHz 1
+
+/* Another drawback of scaling the incvalue by a large factor is the
+ * 64-bit SYSTIM register overflows more quickly. This is dealt with
+ * by simply reading the clock before it overflows.
+ *
+ * Clock ns bits Overflows after
+ * ~~~~~~ ~~~~~~~ ~~~~~~~~~~~~~~~
+ * 96MHz 47-bit 2^(47-INCPERIOD_SHIFT_96MHz) / 10^9 / 3600 = 9.77 hrs
+ * 25MHz 46-bit 2^46 / 10^9 / 3600 = 19.55 hours
+ */
+#define E1000_SYSTIM_OVERFLOW_PERIOD (HZ * 60 * 60 * 4)
+
/* hardware capability, feature, and workaround flags */
#define FLAG_HAS_AMT (1 << 0)
#define FLAG_HAS_FLASH (1 << 1)
@@ -431,7 +474,7 @@ struct e1000_info {
#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
#define FLAG_IS_QUAD_PORT_A (1 << 12)
#define FLAG_IS_QUAD_PORT (1 << 13)
-/* reserved bit14 */
+#define FLAG_HAS_HW_TIMESTAMP (1 << 14)
#define FLAG_APME_IN_WUC (1 << 15)
#define FLAG_APME_IN_CTRL3 (1 << 16)
#define FLAG_APME_CHECK_PORT_B (1 << 17)
@@ -463,6 +506,7 @@ struct e1000_info {
#define FLAG2_NO_DISABLE_RX (1 << 10)
#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11)
#define FLAG2_DFLT_CRC_STRIPPING (1 << 12)
+#define FLAG2_CHECK_RX_HWTSTAMP (1 << 13)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 636ba09..f268cbc 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -108,6 +108,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
E1000_STAT("dropped_smbus", stats.mgpdc),
E1000_STAT("rx_dma_failed", rx_dma_failed),
E1000_STAT("tx_dma_failed", tx_dma_failed),
+ E1000_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
};
#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
@@ -2182,6 +2183,28 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
return 0;
}
+static int e1000e_get_ts_info(struct net_device *netdev,
+ struct ethtool_ts_info *info)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ ethtool_op_get_ts_info(netdev, info);
+
+ if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+ return 0;
+
+ info->so_timestamping |= (SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE);
+
+ info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+
+ info->rx_filters = ((1 << HWTSTAMP_FILTER_NONE) |
+ (1 << HWTSTAMP_FILTER_ALL));
+
+ return 0;
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
@@ -2209,7 +2232,7 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.get_coalesce = e1000_get_coalesce,
.set_coalesce = e1000_set_coalesce,
.get_rxnfc = e1000_get_rxnfc,
- .get_ts_info = ethtool_op_get_ts_info,
+ .get_ts_info = e1000e_get_ts_info,
.get_eee = e1000e_get_eee,
.set_eee = e1000e_set_eee,
};
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 81afad5..8e7e803 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -60,6 +60,7 @@ enum e1e_registers {
E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */
E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */
E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */
+ E1000_FEXTNVM7 = 0x000E4, /* Future Extended NVM 7 - RW */
E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */
#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2))
E1000_LPIC = 0x000FC, /* Low Power Idle Control - RW */
@@ -241,6 +242,15 @@ enum e1e_registers {
#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4))
#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE
E1000_HICR = 0x08F00, /* Host Interface Control */
+ E1000_SYSTIML = 0x0B600, /* System time register Low - RO */
+ E1000_SYSTIMH = 0x0B604, /* System time register High - RO */
+ E1000_TIMINCA = 0x0B608, /* Increment attributes register - RW */
+ E1000_TSYNCTXCTL = 0x0B614, /* Tx Time Sync Control register - RW */
+ E1000_TXSTMPL = 0x0B618, /* Tx timestamp value Low - RO */
+ E1000_TXSTMPH = 0x0B61C, /* Tx timestamp value High - RO */
+ E1000_TSYNCRXCTL = 0x0B620, /* Rx Time Sync Control register - RW */
+ E1000_RXSTMPL = 0x0B624, /* Rx timestamp Low - RO */
+ E1000_RXSTMPH = 0x0B628, /* Rx timestamp High - RO */
};
#define E1000_MAX_PHY_ADDR 4
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 3829f7f..50935ef 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -4601,6 +4601,7 @@ const struct e1000_info e1000_pch2_info = {
.mac = e1000_pch2lan,
.flags = FLAG_IS_ICH
| FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_AMT
| FLAG_HAS_FLASH
@@ -4620,6 +4621,7 @@ const struct e1000_info e1000_pch_lpt_info = {
.mac = e1000_pch_lpt,
.flags = FLAG_IS_ICH
| FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_AMT
| FLAG_HAS_FLASH
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index bf2c84cf..c15b7e4 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -488,20 +488,87 @@ static int e1000_desc_unused(struct e1000_ring *ring)
}
/**
+ * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp
+ * @adapter: board private structure
+ * @hwtstamps: time stamp structure to update
+ * @systim: unsigned 64bit system time value.
+ *
+ * Convert the system time value stored in the RX/TXSTMP registers into a
+ * hwtstamp which can be used by the upper level time stamping functions.
+ *
+ * The 'systim_lock' spinlock is used to protect the consistency of the
+ * system time value. This is needed because reading the 64 bit time
+ * value involves reading two 32 bit registers. The first read latches the
+ * value.
+ **/
+static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter,
+ struct skb_shared_hwtstamps *hwtstamps,
+ u64 systim)
+{
+ u64 ns;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->systim_lock, flags);
+ ns = timecounter_cyc2time(&adapter->tc, systim);
+ spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+ memset(hwtstamps, 0, sizeof(*hwtstamps));
+ hwtstamps->hwtstamp = ns_to_ktime(ns);
+}
+
+/**
+ * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp
+ * @adapter: board private structure
+ * @status: descriptor extended error and status field
+ * @skb: particular skb to include time stamp
+ *
+ * If the time stamp is valid, convert it into the timecounter ns value
+ * and store that result into the shhwtstamps structure which is passed
+ * up the network stack.
+ **/
+static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status,
+ struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u64 rxstmp;
+
+ if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) ||
+ !(status & E1000_RXDEXT_STATERR_TST) ||
+ !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+ return;
+
+ /* The Rx time stamp registers contain the time stamp. No other
+ * received packet will be time stamped until the Rx time stamp
+ * registers are read. Because only one packet can be time stamped
+ * at a time, the register values must belong to this packet and
+ * therefore none of the other additional attributes need to be
+ * compared.
+ */
+ rxstmp = (u64)er32(RXSTMPL);
+ rxstmp |= (u64)er32(RXSTMPH) << 32;
+ e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp);
+
+ adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP;
+}
+
+/**
* e1000_receive_skb - helper function to handle Rx indications
* @adapter: board private structure
- * @status: descriptor status field as written by hardware
+ * @staterr: descriptor extended error and status field as written by hardware
* @vlan: descriptor vlan field as written by hardware (no le/be conversion)
* @skb: pointer to sk_buff to be indicated to stack
**/
static void e1000_receive_skb(struct e1000_adapter *adapter,
struct net_device *netdev, struct sk_buff *skb,
- u8 status, __le16 vlan)
+ u32 staterr, __le16 vlan)
{
u16 tag = le16_to_cpu(vlan);
+
+ e1000e_rx_hwtstamp(adapter, staterr, skb);
+
skb->protocol = eth_type_trans(skb, netdev);
- if (status & E1000_RXD_STAT_VP)
+ if (staterr & E1000_RXD_STAT_VP)
__vlan_hwaccel_put_tag(skb, tag);
napi_gro_receive(&adapter->napi, skb);
@@ -1092,6 +1159,41 @@ static void e1000_print_hw_hang(struct work_struct *work)
}
/**
+ * e1000e_tx_hwtstamp_work - check for Tx time stamp
+ * @work: pointer to work struct
+ *
+ * This work function polls the TSYNCTXCTL valid bit to determine when a
+ * timestamp has been taken for the current stored skb. The timestamp must
+ * be for this skb because only one such packet is allowed in the queue.
+ */
+static void e1000e_tx_hwtstamp_work(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
+ tx_hwtstamp_work);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!adapter->tx_hwtstamp_skb)
+ return;
+
+ if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) {
+ struct skb_shared_hwtstamps shhwtstamps;
+ u64 txstmp;
+
+ txstmp = er32(TXSTMPL);
+ txstmp |= (u64)er32(TXSTMPH) << 32;
+
+ e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp);
+
+ skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps);
+ dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+ adapter->tx_hwtstamp_skb = NULL;
+ } else {
+ /* reschedule to check later */
+ schedule_work(&adapter->tx_hwtstamp_work);
+ }
+}
+
+/**
* e1000_clean_tx_irq - Reclaim resources after transmit completes
* @tx_ring: Tx descriptor ring
*
@@ -1345,8 +1447,8 @@ copydone:
cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
adapter->rx_hdr_split++;
- e1000_receive_skb(adapter, netdev, skb,
- staterr, rx_desc->wb.middle.vlan);
+ e1000_receive_skb(adapter, netdev, skb, staterr,
+ rx_desc->wb.middle.vlan);
next_desc:
rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
@@ -3304,6 +3406,159 @@ static void e1000e_setup_rss_hash(struct e1000_adapter *adapter)
}
/**
+ * e1000e_get_base_timinca - get default SYSTIM time increment attributes
+ * @adapter: board private structure
+ * @timinca: pointer to returned time increment attributes
+ *
+ * Get attributes for incrementing the System Time Register SYSTIML/H at
+ * the default base frequency, and set the cyclecounter shift value.
+ **/
+static s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 incvalue, incperiod, shift;
+
+ /* Make sure clock is enabled on I217 before checking the frequency */
+ if ((hw->mac.type == e1000_pch_lpt) &&
+ !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) &&
+ !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) {
+ u32 fextnvm7 = er32(FEXTNVM7);
+
+ if (!(fextnvm7 & (1 << 0))) {
+ ew32(FEXTNVM7, fextnvm7 | (1 << 0));
+ e1e_flush();
+ }
+ }
+
+ switch (hw->mac.type) {
+ case e1000_pch2lan:
+ case e1000_pch_lpt:
+ /* On I217, the clock frequency is 25MHz or 96MHz as
+ * indicated by the System Clock Frequency Indication
+ */
+ if ((hw->mac.type != e1000_pch_lpt) ||
+ (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+ /* Stable 96MHz frequency */
+ incperiod = INCPERIOD_96MHz;
+ incvalue = INCVALUE_96MHz;
+ shift = INCVALUE_SHIFT_96MHz;
+ adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+ break;
+ }
+ /* fall-through */
+ case e1000_82574:
+ case e1000_82583:
+ /* Stable 25MHz frequency */
+ incperiod = INCPERIOD_25MHz;
+ incvalue = INCVALUE_25MHz;
+ shift = INCVALUE_SHIFT_25MHz;
+ adapter->cc.shift = shift;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) |
+ ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK));
+
+ return 0;
+}
+
+/**
+ * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable
+ * @adapter: board private structure
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware filters.
+ * Not all combinations are supported, in particular event type has to be
+ * specified. Matching the kind of event packet is not supported, with the
+ * exception of "all V2 events regardless of level 2 or 4".
+ **/
+static int e1000e_config_hwtstamp(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct hwtstamp_config *config = &adapter->hwtstamp_config;
+ u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+ u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ u32 regval;
+ s32 ret_val;
+
+ if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+ return -EINVAL;
+
+ /* flags reserved for future extensions - must be zero */
+ if (config->flags)
+ return -EINVAL;
+
+ switch (config->tx_type) {
+ case HWTSTAMP_TX_OFF:
+ tsync_tx_ctl = 0;
+ break;
+ case HWTSTAMP_TX_ON:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config->rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ tsync_rx_ctl = 0;
+ break;
+ case HWTSTAMP_FILTER_ALL:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ /* enable/disable Tx h/w time stamping */
+ regval = er32(TSYNCTXCTL);
+ regval &= ~E1000_TSYNCTXCTL_ENABLED;
+ regval |= tsync_tx_ctl;
+ ew32(TSYNCTXCTL, regval);
+ if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) !=
+ (regval & E1000_TSYNCTXCTL_ENABLED)) {
+ e_err("Timesync Tx Control register not set as expected\n");
+ return -EAGAIN;
+ }
+
+ /* enable/disable Rx h/w time stamping */
+ regval = er32(TSYNCRXCTL);
+ regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+ regval |= tsync_rx_ctl;
+ ew32(TSYNCRXCTL, regval);
+ if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED |
+ E1000_TSYNCRXCTL_TYPE_MASK)) !=
+ (regval & (E1000_TSYNCRXCTL_ENABLED |
+ E1000_TSYNCRXCTL_TYPE_MASK))) {
+ e_err("Timesync Rx Control register not set as expected\n");
+ return -EAGAIN;
+ }
+
+ /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */
+ regval = er32(RXSTMPH);
+ regval = er32(TXSTMPH);
+
+ /* Get and set the System Time Register SYSTIM base frequency */
+ ret_val = e1000e_get_base_timinca(adapter, ®val);
+ if (ret_val)
+ return ret_val;
+ ew32(TIMINCA, regval);
+
+ /* reset the ns time counter */
+ timecounter_init(&adapter->tc, &adapter->cc,
+ ktime_to_ns(ktime_get_real()));
+
+ return 0;
+}
+
+/**
* e1000_configure - configure the hardware for Rx and Tx
* @adapter: private board structure
**/
@@ -3529,6 +3784,9 @@ void e1000e_reset(struct e1000_adapter *adapter)
e1000e_reset_adaptive(hw);
+ /* initialize systim and reset the ns time counter */
+ e1000e_config_hwtstamp(adapter);
+
if (!netif_running(adapter->netdev) &&
!test_bit(__E1000_TESTING, &adapter->state)) {
e1000_power_down_phy(adapter);
@@ -3665,6 +3923,24 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter)
}
/**
+ * e1000e_cyclecounter_read - read raw cycle counter (used by time counter)
+ * @cc: cyclecounter structure
+ **/
+static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc)
+{
+ struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
+ cc);
+ struct e1000_hw *hw = &adapter->hw;
+ cycle_t systim;
+
+ /* latch SYSTIMH on read of SYSTIML */
+ systim = (cycle_t)er32(SYSTIML);
+ systim |= (cycle_t)er32(SYSTIMH) << 32;
+
+ return systim;
+}
+
+/**
* e1000_sw_init - Initialize general software structures (struct e1000_adapter)
* @adapter: board private structure to initialize
*
@@ -3690,6 +3966,17 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
if (e1000_alloc_queues(adapter))
return -ENOMEM;
+ /* Setup hardware time stamping cyclecounter */
+ if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
+ adapter->cc.read = e1000e_cyclecounter_read;
+ adapter->cc.mask = CLOCKSOURCE_MASK(64);
+ adapter->cc.mult = 1;
+ /* cc.shift set in e1000e_get_base_tininca() */
+
+ spin_lock_init(&adapter->systim_lock);
+ INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work);
+ }
+
/* Explicitly disable IRQ since the NIC can be in any state. */
e1000_irq_disable(adapter);
@@ -4597,6 +4884,17 @@ link_up:
if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
e1000e_check_82574_phy_workaround(adapter);
+ /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */
+ if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) {
+ if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) &&
+ (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) {
+ er32(RXSTMPH);
+ adapter->rx_hwtstamp_cleared++;
+ } else {
+ adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP;
+ }
+ }
+
/* Reset the timer */
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer,
@@ -4608,6 +4906,7 @@ link_up:
#define E1000_TX_FLAGS_TSO 0x00000004
#define E1000_TX_FLAGS_IPV4 0x00000008
#define E1000_TX_FLAGS_NO_FCS 0x00000010
+#define E1000_TX_FLAGS_HWTSTAMP 0x00000020
#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
#define E1000_TX_FLAGS_VLAN_SHIFT 16
@@ -4866,6 +5165,11 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
txd_lower &= ~(E1000_TXD_CMD_IFCS);
+ if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_EXTCMD_TSTAMP;
+ }
+
i = tx_ring->next_to_use;
do {
@@ -5089,7 +5393,15 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
nr_frags);
if (count) {
- skb_tx_timestamp(skb);
+ if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
+ !adapter->tx_hwtstamp_skb)) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ tx_flags |= E1000_TX_FLAGS_HWTSTAMP;
+ adapter->tx_hwtstamp_skb = skb_get(skb);
+ schedule_work(&adapter->tx_hwtstamp_work);
+ } else {
+ skb_tx_timestamp(skb);
+ }
netdev_sent_queue(netdev, skb->len);
e1000_tx_queue(tx_ring, tx_flags, count);
@@ -5317,6 +5629,43 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
return 0;
}
+/**
+ * e1000e_hwtstamp_ioctl - control hardware time stamping
+ * @netdev: network interface device structure
+ * @ifreq: interface request
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't cause any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware filters.
+ * Not all combinations are supported, in particular event type has to be
+ * specified. Matching the kind of event packet is not supported, with the
+ * exception of "all V2 events regardless of level 2 or 4".
+ **/
+static int e1000e_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct hwtstamp_config config;
+ int ret_val;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ adapter->hwtstamp_config = config;
+
+ ret_val = e1000e_config_hwtstamp(adapter);
+ if (ret_val)
+ return ret_val;
+
+ config = adapter->hwtstamp_config;
+
+ return copy_to_user(ifr->ifr_data, &config,
+ sizeof(config)) ? -EFAULT : 0;
+}
+
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
switch (cmd) {
@@ -5324,6 +5673,8 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
case SIOCGMIIREG:
case SIOCSMIIREG:
return e1000_mii_ioctl(netdev, ifr, cmd);
+ case SIOCSHWTSTAMP:
+ return e1000e_hwtstamp_ioctl(netdev, ifr);
default:
return -EOPNOTSUPP;
}
@@ -6380,6 +6731,14 @@ static void e1000_remove(struct pci_dev *pdev)
cancel_work_sync(&adapter->update_phy_task);
cancel_work_sync(&adapter->print_hang_task);
+ if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
+ cancel_work_sync(&adapter->tx_hwtstamp_work);
+ if (adapter->tx_hwtstamp_skb) {
+ dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
+ adapter->tx_hwtstamp_skb = NULL;
+ }
+ }
+
if (!(netdev->flags & IFF_UP))
e1000_power_down_phy(adapter);
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists