| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130122073446.13822.39253.stgit@srivatsabhat.in.ibm.com>
Date: Tue, 22 Jan 2013 13:04:54 +0530
From: "Srivatsa S. Bhat" <srivatsa.bhat@...ux.vnet.ibm.com>
To: tglx@...utronix.de, peterz@...radead.org, tj@...nel.org,
oleg@...hat.com, paulmck@...ux.vnet.ibm.com, rusty@...tcorp.com.au,
mingo@...nel.org, akpm@...ux-foundation.org, namhyung@...nel.org
Cc: rostedt@...dmis.org, wangyun@...ux.vnet.ibm.com,
xiaoguangrong@...ux.vnet.ibm.com, rjw@...k.pl, sbw@....edu,
fweisbec@...il.com, linux@....linux.org.uk,
nikunj@...ux.vnet.ibm.com, srivatsa.bhat@...ux.vnet.ibm.com,
linux-pm@...r.kernel.org, linux-arch@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linuxppc-dev@...ts.ozlabs.org, netdev@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v5 07/45] CPU hotplug: Provide APIs to prevent CPU offline
from atomic context
There are places where preempt_disable() or local_irq_disable() are used
to prevent any CPU from going offline during the critical section. Let us
call them as "atomic hotplug readers" ("atomic" because they run in atomic,
non-preemptible contexts).
Today, preempt_disable() or its equivalent works because the hotplug writer
uses stop_machine() to take CPUs offline. But once stop_machine() is gone
from the CPU hotplug offline path, the readers won't be able to prevent
CPUs from going offline using preempt_disable().
So the intent here is to provide synchronization APIs for such atomic hotplug
readers, to prevent (any) CPUs from going offline, without depending on
stop_machine() at the writer-side. The new APIs will look something like
this: get_online_cpus_atomic() and put_online_cpus_atomic()
Some important design requirements and considerations:
-----------------------------------------------------
1. Scalable synchronization at the reader-side, especially in the fast-path
Any synchronization at the atomic hotplug readers side must be highly
scalable - avoid global single-holder locks/counters etc. Because, these
paths currently use the extremely fast preempt_disable(); our replacement
to preempt_disable() should not become ridiculously costly and also should
not serialize the readers among themselves needlessly.
At a minimum, the new APIs must be extremely fast at the reader side
atleast in the fast-path, when no CPU offline writers are active.
2. preempt_disable() was recursive. The replacement should also be recursive.
3. No (new) lock-ordering restrictions
preempt_disable() was super-flexible. It didn't impose any ordering
restrictions or rules for nesting. Our replacement should also be equally
flexible and usable.
4. No deadlock possibilities
Regular per-cpu locking is not the way to go if we want to have relaxed
rules for lock-ordering. Because, we can end up in circular-locking
dependencies as explained in https://lkml.org/lkml/2012/12/6/290
So, avoid the usual per-cpu locking schemes (per-cpu locks/per-cpu atomic
counters with spin-on-contention etc) as much as possible, to avoid
numerous deadlock possibilities from creeping in.
Implementation of the design:
----------------------------
We use per-CPU reader-writer locks for synchronization because:
a. They are quite fast and scalable in the fast-path (when no writers are
active), since they use fast per-cpu counters in those paths.
b. They are recursive at the reader side.
c. They provide a good amount of safety against deadlocks; they don't
spring new deadlock possibilities on us from out of nowhere. As a
result, they have relaxed locking rules and are quite flexible, and
thus are best suited for replacing usages of preempt_disable() or
local_irq_disable() at the reader side.
Together, these satisfy all the requirements mentioned above.
I'm indebted to Michael Wang and Xiao Guangrong for their numerous thoughtful
suggestions and ideas, which inspired and influenced many of the decisions in
this as well as previous designs. Thanks a lot Michael and Xiao!
Cc: Russell King <linux@....linux.org.uk>
Cc: Mike Frysinger <vapier@...too.org>
Cc: Tony Luck <tony.luck@...el.com>
Cc: Ralf Baechle <ralf@...ux-mips.org>
Cc: David Howells <dhowells@...hat.com>
Cc: "James E.J. Bottomley" <jejb@...isc-linux.org>
Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@...ibm.com>
Cc: Paul Mundt <lethal@...ux-sh.org>
Cc: "David S. Miller" <davem@...emloft.net>
Cc: "H. Peter Anvin" <hpa@...or.com>
Cc: x86@...nel.org
Cc: linux-arm-kernel@...ts.infradead.org
Cc: uclinux-dist-devel@...ckfin.uclinux.org
Cc: linux-ia64@...r.kernel.org
Cc: linux-mips@...ux-mips.org
Cc: linux-am33-list@...hat.com
Cc: linux-parisc@...r.kernel.org
Cc: linuxppc-dev@...ts.ozlabs.org
Cc: linux-s390@...r.kernel.org
Cc: linux-sh@...r.kernel.org
Cc: sparclinux@...r.kernel.org
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@...ux.vnet.ibm.com>
---
arch/arm/Kconfig | 1 +
arch/blackfin/Kconfig | 1 +
arch/ia64/Kconfig | 1 +
arch/mips/Kconfig | 1 +
arch/mn10300/Kconfig | 1 +
arch/parisc/Kconfig | 1 +
arch/powerpc/Kconfig | 1 +
arch/s390/Kconfig | 1 +
arch/sh/Kconfig | 1 +
arch/sparc/Kconfig | 1 +
arch/x86/Kconfig | 1 +
include/linux/cpu.h | 4 +++
kernel/cpu.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++---
13 files changed, 69 insertions(+), 3 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 67874b8..cb6b94b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1616,6 +1616,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP && HOTPLUG
+ select PERCPU_RWLOCK
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b6f3ad5..83d9882 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -261,6 +261,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP && HOTPLUG
+ select PERCPU_RWLOCK
default y
config BF_REV_MIN
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3279646..c246772 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -378,6 +378,7 @@ config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && EXPERIMENTAL
select HOTPLUG
+ select PERCPU_RWLOCK
default n
---help---
Say Y here to experiment with turning CPUs off and on. CPUs
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2ac626a..f97c479 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -956,6 +956,7 @@ config SYS_HAS_EARLY_PRINTK
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU
+ select PERCPU_RWLOCK
help
Say Y here to allow turning CPUs off and on. CPUs can be
controlled through /sys/devices/system/cpu.
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index e70001c..a64e488 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -60,6 +60,7 @@ config ARCH_HAS_ILOG2_U32
config HOTPLUG_CPU
def_bool n
+ select PERCPU_RWLOCK
source "init/Kconfig"
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index b77feff..6f55cd4 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -226,6 +226,7 @@ config HOTPLUG_CPU
bool
default y if SMP
select HOTPLUG
+ select PERCPU_RWLOCK
config ARCH_SELECT_MEMORY_MODEL
def_bool y
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 17903f1..56b1f15 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -336,6 +336,7 @@ config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
+ select PERCPU_RWLOCK
---help---
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index b5ea38c..a9aafb4 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -299,6 +299,7 @@ config HOTPLUG_CPU
prompt "Support for hot-pluggable CPUs"
depends on SMP
select HOTPLUG
+ select PERCPU_RWLOCK
help
Say Y here to be able to turn CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu/cpu#.
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index babc2b8..8c92eef 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -765,6 +765,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
+ select PERCPU_RWLOCK
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 9f2edb5..e2bd573 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -253,6 +253,7 @@ config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SPARC64 && SMP
select HOTPLUG
+ select PERCPU_RWLOCK
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu/cpu#.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 79795af..a225d12 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1689,6 +1689,7 @@ config PHYSICAL_ALIGN
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP && HOTPLUG
+ select PERCPU_RWLOCK
---help---
Say Y here to allow turning CPUs off and on. CPUs can be
controlled through /sys/devices/system/cpu.
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index ce7a074..cf24da1 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys;
extern void get_online_cpus(void);
extern void put_online_cpus(void);
+extern void get_online_cpus_atomic(void);
+extern void put_online_cpus_atomic(void);
#define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri)
#define register_hotcpu_notifier(nb) register_cpu_notifier(nb)
#define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb)
@@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_unlock(void)
#define get_online_cpus() do { } while (0)
#define put_online_cpus() do { } while (0)
+#define get_online_cpus_atomic() do { } while (0)
+#define put_online_cpus_atomic() do { } while (0)
#define hotcpu_notifier(fn, pri) do { (void)(fn); } while (0)
/* These aren't inline functions due to a GCC bug. */
#define register_hotcpu_notifier(nb) ({ (void)(nb); 0; })
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 3046a50..1c84138 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -1,6 +1,18 @@
/* CPU control.
* (C) 2001, 2002, 2003, 2004 Rusty Russell
*
+ * Rework of the CPU hotplug offline mechanism to remove its dependence on
+ * the heavy-weight stop_machine() primitive, by Srivatsa S. Bhat and
+ * Paul E. McKenney.
+ *
+ * Copyright (C) IBM Corporation, 2012-2013
+ * Authors: Srivatsa S. Bhat <srivatsa.bhat@...ux.vnet.ibm.com>
+ * Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
+ *
+ * With lots of invaluable suggestions from:
+ * Oleg Nesterov <oleg@...hat.com>
+ * Tejun Heo <tj@...nel.org>
+ *
* This code is licenced under the GPL.
*/
#include <linux/proc_fs.h>
@@ -19,6 +31,7 @@
#include <linux/mutex.h>
#include <linux/gfp.h>
#include <linux/suspend.h>
+#include <linux/percpu-rwlock.h>
#include "smpboot.h"
@@ -133,6 +146,38 @@ static void cpu_hotplug_done(void)
mutex_unlock(&cpu_hotplug.lock);
}
+/*
+ * Per-CPU Reader-Writer lock to synchronize between atomic hotplug
+ * readers and the CPU offline hotplug writer.
+ */
+DEFINE_STATIC_PERCPU_RWLOCK(hotplug_pcpu_rwlock);
+
+/*
+ * Invoked by atomic hotplug reader (a task which wants to prevent
+ * CPU offline, but which can't afford to sleep), to prevent CPUs from
+ * going offline. So, you can call this function from atomic contexts
+ * (including interrupt handlers).
+ *
+ * Note: This does NOT prevent CPUs from coming online! It only prevents
+ * CPUs from going offline.
+ *
+ * You can call this function recursively.
+ *
+ * Returns with preemption disabled (but interrupts remain as they are;
+ * they are not disabled).
+ */
+void get_online_cpus_atomic(void)
+{
+ percpu_read_lock_irqsafe(&hotplug_pcpu_rwlock);
+}
+EXPORT_SYMBOL_GPL(get_online_cpus_atomic);
+
+void put_online_cpus_atomic(void)
+{
+ percpu_read_unlock_irqsafe(&hotplug_pcpu_rwlock);
+}
+EXPORT_SYMBOL_GPL(put_online_cpus_atomic);
+
#else /* #if CONFIG_HOTPLUG_CPU */
static void cpu_hotplug_begin(void) {}
static void cpu_hotplug_done(void) {}
@@ -246,15 +291,21 @@ struct take_cpu_down_param {
static int __ref take_cpu_down(void *_param)
{
struct take_cpu_down_param *param = _param;
- int err;
+ unsigned long flags;
+ int err = 0;
+
+ percpu_write_lock_irqsave(&hotplug_pcpu_rwlock, &flags);
/* Ensure this CPU doesn't handle any more interrupts. */
err = __cpu_disable();
if (err < 0)
- return err;
+ goto out;
cpu_notify(CPU_DYING | param->mod, param->hcpu);
- return 0;
+
+out:
+ percpu_write_unlock_irqrestore(&hotplug_pcpu_rwlock, &flags);
+ return err;
}
/* Requires cpu_add_remove_lock to be held */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists