| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1359369828-13663-1-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Mon, 28 Jan 2013 02:43:48 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Bruce Allan <bruce.w.allan@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com, stable@...r.kernel.org,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net] e1000e: enable ECC on I217/I218 to catch packet buffer memory errors
From: Bruce Allan <bruce.w.allan@...el.com>
In rare instances, memory errors have been detected in the internal packet
buffer memory on I217/I218 when stressed under certain environmental
conditions. Enable Error Correcting Code (ECC) in hardware to catch both
correctable and uncorrectable errors. Correctable errors will be handled
by the hardware. Uncorrectable errors in the packet buffer will cause the
packet to be received with an error indication in the buffer descriptor
causing the packet to be discarded. If the uncorrectable error is in the
descriptor itself, the hardware will stop and interrupt the driver
indicating the error. The driver will then reset the hardware in order to
clear the error and restart.
Both types of errors will be accounted for in statistics counters.
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Cc: <stable@...r.kernel.org> # 3.5.x & 3.6.x
Tested-by: Jeff Pieper <jeffrey.e.pieper@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
This is the back-ported version of the patch in net-next which applies
to David Miller's net tree.
---
drivers/net/ethernet/intel/e1000e/defines.h | 9 ++++++
drivers/net/ethernet/intel/e1000e/e1000.h | 2 ++
drivers/net/ethernet/intel/e1000e/ethtool.c | 2 ++
drivers/net/ethernet/intel/e1000e/hw.h | 1 +
drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 +++++++
drivers/net/ethernet/intel/e1000e/netdev.c | 46 +++++++++++++++++++++++++++++
6 files changed, 71 insertions(+)
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 02a12b6..4dab6fc 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -232,6 +232,7 @@
#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
#define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */
#define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */
+#define E1000_CTRL_MEHE 0x00080000 /* Memory Error Handling Enable */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
@@ -389,6 +390,12 @@
#define E1000_PBS_16K E1000_PBA_16K
+/* Uncorrectable/correctable ECC Error counts and enable bits */
+#define E1000_PBECCSTS_CORR_ERR_CNT_MASK 0x000000FF
+#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK 0x0000FF00
+#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT 8
+#define E1000_PBECCSTS_ECC_ENABLE 0x00010000
+
#define IFS_MAX 80
#define IFS_MIN 40
#define IFS_RATIO 4
@@ -408,6 +415,7 @@
#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
@@ -443,6 +451,7 @@
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
+#define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */
#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
#define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 6782a2e..7e95f22 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -309,6 +309,8 @@ struct e1000_adapter {
struct napi_struct napi;
+ unsigned int uncorr_errors; /* uncorrectable ECC errors */
+ unsigned int corr_errors; /* correctable ECC errors */
unsigned int restart_queue;
u32 txd_cmd;
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index f95bc6e..fd4772a 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -108,6 +108,8 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
E1000_STAT("dropped_smbus", stats.mgpdc),
E1000_STAT("rx_dma_failed", rx_dma_failed),
E1000_STAT("tx_dma_failed", tx_dma_failed),
+ E1000_STAT("uncorr_ecc_errors", uncorr_errors),
+ E1000_STAT("corr_ecc_errors", corr_errors),
};
#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index cf21777..b88676f 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -77,6 +77,7 @@ enum e1e_registers {
#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */
E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */
E1000_PBS = 0x01008, /* Packet Buffer Size */
+ E1000_PBECCSTS = 0x0100C, /* Packet Buffer ECC Status - RW */
E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */
E1000_EEWR = 0x0102C, /* EEPROM Write Register - RW */
E1000_FLOP = 0x0103C, /* FLASH Opcode Register */
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 9763365..24d9f61 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -3624,6 +3624,17 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
if (hw->mac.type == e1000_ich8lan)
reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
ew32(RFCTL, reg);
+
+ /* Enable ECC on Lynxpoint */
+ if (hw->mac.type == e1000_pch_lpt) {
+ reg = er32(PBECCSTS);
+ reg |= E1000_PBECCSTS_ECC_ENABLE;
+ ew32(PBECCSTS, reg);
+
+ reg = er32(CTRL);
+ reg |= E1000_CTRL_MEHE;
+ ew32(CTRL, reg);
+ }
}
/**
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index fbf75fd..643c883 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1678,6 +1678,23 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
+ /* Reset on uncorrectable ECC error */
+ if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) {
+ u32 pbeccsts = er32(PBECCSTS);
+
+ adapter->corr_errors +=
+ pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+ adapter->uncorr_errors +=
+ (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+ E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->reset_task);
+
+ /* return immediately since reset is imminent */
+ return IRQ_HANDLED;
+ }
+
if (napi_schedule_prep(&adapter->napi)) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
@@ -1741,6 +1758,23 @@ static irqreturn_t e1000_intr(int irq, void *data)
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
+ /* Reset on uncorrectable ECC error */
+ if ((icr & E1000_ICR_ECCER) && (hw->mac.type == e1000_pch_lpt)) {
+ u32 pbeccsts = er32(PBECCSTS);
+
+ adapter->corr_errors +=
+ pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+ adapter->uncorr_errors +=
+ (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+ E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->reset_task);
+
+ /* return immediately since reset is imminent */
+ return IRQ_HANDLED;
+ }
+
if (napi_schedule_prep(&adapter->napi)) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
@@ -2104,6 +2138,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
if (adapter->msix_entries) {
ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
+ } else if (hw->mac.type == e1000_pch_lpt) {
+ ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
} else {
ew32(IMS, IMS_ENABLE_MASK);
}
@@ -4251,6 +4287,16 @@ static void e1000e_update_stats(struct e1000_adapter *adapter)
adapter->stats.mgptc += er32(MGTPTC);
adapter->stats.mgprc += er32(MGTPRC);
adapter->stats.mgpdc += er32(MGTPDC);
+
+ /* Correctable ECC Errors */
+ if (hw->mac.type == e1000_pch_lpt) {
+ u32 pbeccsts = er32(PBECCSTS);
+ adapter->corr_errors +=
+ pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
+ adapter->uncorr_errors +=
+ (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
+ E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
+ }
}
/**
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists