[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <001a01cdfeef$cdc5bee0$69513ca0$@acksys.fr>
Date:	Wed, 30 Jan 2013 14:43:36 +0100
From:	"voncken" <cedric.voncken@...sys.fr>
To:	"'Claudiu Manoil'" <claudiu.manoil@...escale.com>
Cc:	<netdev@...r.kernel.org>
Subject: Gianfar : Drop a long frame
	Hi Claudiu, 
	I have a problem with the gianfar driver.
	My test conditions are:
		- Disable rxvlan hardware acceleration (ethtool -K ethx
rxvlan off)
		- Receive frame contains a VLAN tag and with a frame len set
to the MTU (1500 bytes).
	In this condition, when I received a long frame the bdp->length is
set to 1538 bytes. 
	I guess it is composed of:
		1500 bytes: L3 data bytes
		 + 14 bytes:  Ethernet header 
		 + 4 bytes:  Vlan Tag header 
		 + 8 bytes: FCB structure size GMAC_FCB_LEN
		 + 8 bytes: eTSEC padding
		 + 4 bytes: Frames CRC (FCS)
	The Maximum frame len is set to 1536 because the function
gfar_change_mtu does not integrate the FCS in the computed frame size.
	In this condition this frame is dropped with the test line 2792
function gfar_clean_rx_ring 
		if (unlikely(!(bdp->status & RXBD_ERR) &&
				bdp->length > priv->rx_buffer_size))
			bdp->status = RXBD_LARGE;
	
	How I can receive this frame correctly?
	
	Best regards
Cedric Voncken | R&d Engineer
----------------------------------------------------------------------------
------------------------------
T : +33 1 30 56 46 52 
cedric.voncken@...sys.fr | www.acksys.fr
----------------------------------------------------------------------------
------------------------------
           
ZA Val Joyeux - 10 rue des Entrepreneurs - 78450 VILLEPREUX - France
----------------------------------------------------------------------------
----------
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists
 
