| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1360063716-13415-2-git-send-email-amirv@mellanox.com>
Date: Tue, 5 Feb 2013 13:28:28 +0200
From: Amir Vadai <amirv@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: Amir Vadai <amirv@...lanox.com>, netdev@...r.kernel.org,
Or Gerlitz <ogerlitz@...lanox.com>,
Yan Burman <yanb@...lanox.com>
Subject: [PATCH net-next 1/9] net/mlx4_en: Optimize loopback related checks in data path
From: Yan Burman <yanb@...lanox.com>
Currently there are relatively complex conditional checks in the fast path,
for TX loopback enabling and resulting RX filter logic.
Move elaborate if's out of data path, replace them with a single flag
for each state and update that state from appropriate places.
Also, in native (non SRIOV) mode and not in loopback or in selftest,
there is no need to try and filter out packets that HW loopback-ed,
as in native mode we do not loopback packets anymore.
Signed-off-by: Yan Burman <yanb@...lanox.com>
Signed-off-by: Amir Vadai <amirv@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_main.c | 22 ++++++++++++
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 39 ++++++++++++----------
drivers/net/ethernet/mellanox/mlx4/en_selftest.c | 3 ++
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 16 ++++++++-
6 files changed, 65 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index f3c7961..e3c3d12 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -95,6 +95,28 @@ int en_print(const char *level, const struct mlx4_en_priv *priv,
return i;
}
+void mlx4_en_update_loopback_state(struct net_device *dev,
+ netdev_features_t features)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+
+ priv->flags &= ~(MLX4_EN_FLAG_RX_FILTER_NEEDED|
+ MLX4_EN_FLAG_ENABLE_HW_LOOPBACK);
+
+ /* Drop the packet if SRIOV is not enabled
+ * and not performing the selftest or flb disabled
+ */
+ if (mlx4_is_mfunc(priv->mdev->dev) &&
+ !(features & NETIF_F_LOOPBACK) && !priv->validate_loopback)
+ priv->flags |= MLX4_EN_FLAG_RX_FILTER_NEEDED;
+
+ /* Set dmac in Tx WQE if we are in SRIOV mode or if loopback selftest
+ * is requested
+ */
+ if (mlx4_is_mfunc(priv->mdev->dev) || priv->validate_loopback)
+ priv->flags |= MLX4_EN_FLAG_ENABLE_HW_LOOPBACK;
+}
+
static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
{
struct mlx4_en_profile *params = &mdev->profile;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index ac1c14f..551ef68 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1563,6 +1563,8 @@ static int mlx4_en_set_features(struct net_device *netdev,
priv->ctrl_flags &=
cpu_to_be32(~MLX4_WQE_CTRL_FORCE_LOOPBACK);
+ mlx4_en_update_loopback_state(netdev, features);
+
return 0;
}
@@ -1731,6 +1733,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
en_warn(priv, "Using %d TX rings\n", prof->tx_ring_num);
en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
+ mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
+
/* Configure port */
mlx4_en_calc_rx_buf(dev);
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index fed26d8..ed214d0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -563,9 +563,6 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
unsigned int length;
int polled = 0;
int ip_summed;
- struct ethhdr *ethh;
- dma_addr_t dma;
- u64 s_mac;
int factor = priv->cqe_factor;
if (!priv->port_up)
@@ -603,21 +600,27 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud
goto next;
}
- /* Get pointer to first fragment since we haven't skb yet and
- * cast it to ethhdr struct */
- dma = be64_to_cpu(rx_desc->data[0].addr);
- dma_sync_single_for_cpu(priv->ddev, dma, sizeof(*ethh),
- DMA_FROM_DEVICE);
- ethh = (struct ethhdr *)(page_address(frags[0].page) +
- frags[0].offset);
- s_mac = mlx4_en_mac_to_u64(ethh->h_source);
-
- /* If source MAC is equal to our own MAC and not performing
- * the selftest or flb disabled - drop the packet */
- if (s_mac == priv->mac &&
- !((dev->features & NETIF_F_LOOPBACK) ||
- priv->validate_loopback))
- goto next;
+ /* Check if we need to drop the packet if SRIOV is not enabled
+ * and not performing the selftest or flb disabled
+ */
+ if (priv->flags & MLX4_EN_FLAG_RX_FILTER_NEEDED) {
+ struct ethhdr *ethh;
+ dma_addr_t dma;
+ u64 s_mac;
+ /* Get pointer to first fragment since we haven't
+ * skb yet and cast it to ethhdr struct
+ */
+ dma = be64_to_cpu(rx_desc->data[0].addr);
+ dma_sync_single_for_cpu(priv->ddev, dma, sizeof(*ethh),
+ DMA_FROM_DEVICE);
+ ethh = (struct ethhdr *)(page_address(frags[0].page) +
+ frags[0].offset);
+
+ /* Drop the packet, since HW loopback-ed it */
+ s_mac = mlx4_en_mac_to_u64(ethh->h_source);
+ if (s_mac == priv->mac)
+ goto next;
+ }
/*
* Packet is OK - process it.
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
index bf2e5d3..3488c6d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
@@ -87,6 +87,8 @@ static int mlx4_en_test_loopback(struct mlx4_en_priv *priv)
priv->loopback_ok = 0;
priv->validate_loopback = 1;
+ mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
+
/* xmit */
if (mlx4_en_test_loopback_xmit(priv)) {
en_err(priv, "Transmitting loopback packet failed\n");
@@ -107,6 +109,7 @@ static int mlx4_en_test_loopback(struct mlx4_en_priv *priv)
mlx4_en_test_loopback_exit:
priv->validate_loopback = 0;
+ mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
return !loopback_ok;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index 30724d8..3b28e16 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -640,7 +640,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
ring->tx_csum++;
}
- if (mlx4_is_mfunc(mdev->dev) || priv->validate_loopback) {
+ if (priv->flags & MLX4_EN_FLAG_ENABLE_HW_LOOPBACK) {
/* Copy dst mac address to wqe. This allows loopback in eSwitch,
* so that VFs and PF can communicate with each other
*/
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 43f0165..696dcf3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -432,6 +432,17 @@ struct ethtool_flow_id {
u64 id;
};
+enum {
+ MLX4_EN_FLAG_PROMISC = (1 << 0),
+ MLX4_EN_FLAG_MC_PROMISC = (1 << 1),
+ /* whether we need to enable hardware loopback by putting dmac
+ * in Tx WQE
+ */
+ MLX4_EN_FLAG_ENABLE_HW_LOOPBACK = (1 << 2),
+ /* whether we need to drop packets that hardware loopback-ed */
+ MLX4_EN_FLAG_RX_FILTER_NEEDED = (1 << 3)
+};
+
struct mlx4_en_priv {
struct mlx4_en_dev *mdev;
struct mlx4_en_port_profile *prof;
@@ -481,8 +492,6 @@ struct mlx4_en_priv {
struct mlx4_en_rss_map rss_map;
__be32 ctrl_flags;
u32 flags;
-#define MLX4_EN_FLAG_PROMISC 0x1
-#define MLX4_EN_FLAG_MC_PROMISC 0x2
u8 num_tx_rings_p_up;
u32 tx_ring_num;
u32 rx_ring_num;
@@ -534,6 +543,9 @@ enum mlx4_en_wol {
#define MLX4_EN_WOL_DO_MODIFY (1ULL << 63)
+void mlx4_en_update_loopback_state(struct net_device *dev,
+ netdev_features_t features);
+
void mlx4_en_destroy_netdev(struct net_device *dev);
int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
struct mlx4_en_port_profile *prof);
--
1.7.6.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists