[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1360267375.3605.32.camel@bwh-desktop.uk.solarflarecom.com>
Date: Thu, 7 Feb 2013 20:02:55 +0000
From: Ben Hutchings <bhutchings@...arflare.com>
To: Freddy Xin <freddy@...x.com.tw>
CC: <netdev@...r.kernel.org>, <davem@...emloft.net>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH, resubmit] ax88179_178a: ASIX AX88179_178A USB 3.0/2.0
to gigabit ethernet adapter driver
On Thu, 2013-02-07 at 21:39 +0800, Freddy Xin wrote:
> From: Freddy Xin <freddy@...x.com.tw>
>
> This is a resubmission.
> Added "const" to ethtool_ops structure and fixed the coding style of AX88179_BULKIN_SIZE array.
> Fixed the issue that the default MTU is not 1500.
> Added ax88179_change_mtu function and enabled the hardware jumbo frame function to support an
> MTU higher than 1500.
> Fixed indentation and empty line coding style errors.
> The _nopm version usb functions were added to access register in suspend and resume functions.
> Serveral variables allocted dynamically were removed and replaced by stack variables.
> ax88179_get_eeprom were modified from asix_get_eeprom in asix_common.
>
> This patch adds a driver for ASIX's AX88179 family of USB 3.0/2.0
> to gigabit ethernet adapters. It's based on the AX88xxx driver but
> the usb commands used to access registers for AX88179 are completely different.
> This driver had been verified on x86 system with AX88179/AX88178A and
> Sitcomm LN-032 USB dongles.
>
> Signed-off-by: Freddy Xin <freddy@...x.com.tw>
[...]
> --- /dev/null
> +++ b/drivers/net/usb/ax88179_178a.c
[...]
> +struct ax88179_data {
> + u16 rxctl;
> +};
Should also be declared __packed, as on some architectures it may be
padded to 4 bytes.
rxctl is presumably required to be little-endian (__le16)?
> +struct ax88179_int_data {
> + u16 res1;
> + u8 link;
> + u16 res2;
> + u8 status;
> + u16 res3;
> +} __packed;
Same here, the u16 fields are presumably little-endian?
[...]
> +struct ax88179_rx_pkt_header {
> + u8 l4_csum_err:1,
> + l3_csum_err:1,
> + l4_type:3,
> + l3_type:2,
> + ce:1;
> +
> + u8 vlan_ind:3,
> + rx_ok:1,
> + pri:3,
> + bmc:1;
> +
> + u16 len:13,
> + crc:1,
> + mii:1,
> + drop:1;
> +} __packed;
This won't work on both big-endian systems (assuming this works on x86).
You apparently try to convert the structure in-place in
ax88179_rx_fixup() by calling le32_to_cpus(); that may work if you
define all the bitfields to be part of a u32 but it won't work with the
current definition.
[...]
> +static int
> +ax88179_set_features(struct net_device *net, netdev_features_t features)
> +{
> + u8 tmp;
> + struct usbnet *dev = netdev_priv(net);
> + netdev_features_t changed = net->features ^ features;
> +
> + if (changed & NETIF_F_TSO)
> + net->features ^= NETIF_F_TSO;
> +
> + if (changed & NETIF_F_SG)
> + net->features ^= NETIF_F_SG;
Don't change net->features; the caller will do that for you.
> + if (changed & NETIF_F_IP_CSUM) {
> + ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
> + tmp ^= AX_TXCOE_TCP | AX_TXCOE_UDP;
> + ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
> +
> + net->features ^= NETIF_F_IP_CSUM;
> + }
[...]
Isn't tmp going to be in little-endian byte order, so this doesn't work
correctly on a big-endian system?
There are a lot of reads and writes of 16-bit registers using
ax88179_{read,write}_cmd(); maybe you should add
ax88179_{read,write}_le16() to handle this specific case.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists