netdev - bonding 802.3ad mode with bridge and tap devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <511A0C64.1010602@profihost.ag>
Date:	Tue, 12 Feb 2013 10:33:24 +0100
From:	Stefan Priebe - Profihost AG <s.priebe@...fihost.ag>
To:	fubar@...ibm.com
CC:	andy@...yhouse.net, Linux Netdev List <netdev@...r.kernel.org>
Subject: bonding 802.3ad mode with bridge and tap devices

Hello,

i'm using KVM with tapdevices on vanilla 3.7.7 kernel.

Layout:

eth0 ------
           | -- bond0 --- vmbr0 ---- tap
eth1 ------

This works fine as long as i use active-backup mode. But if i switch to
802.3ad mode the host using vmbr0 as his default gw works fine but the
tap device does not.

It starts to work fine again if i set eth0/eth1 into promiscious mode.
Is this a kernel bug or my fault?

Thanks!

Greets,
Stefan
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html