[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1362737237-13363-16-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Fri, 8 Mar 2013 02:07:17 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Bruce Allan <bruce.w.allan@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 15/15] e1000e: cleanup - move defines to appropriate header file
From: Bruce Allan <bruce.w.allan@...el.com>
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/e1000e/82571.h | 2 ++
drivers/net/ethernet/intel/e1000e/defines.h | 3 +++
drivers/net/ethernet/intel/e1000e/ethtool.c | 6 ++----
drivers/net/ethernet/intel/e1000e/netdev.c | 5 -----
4 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/82571.h b/drivers/net/ethernet/intel/e1000e/82571.h
index 85cb1a3..08e24dc 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.h
+++ b/drivers/net/ethernet/intel/e1000e/82571.h
@@ -44,6 +44,8 @@
#define E1000_EIAC_82574 0x000DC /* Ext. Interrupt Auto Clear - RW */
#define E1000_EIAC_MASK_82574 0x01F00000
+#define E1000_IVAR_INT_ALLOC_VALID 0x8
+
/* Manageability Operation Mode mask */
#define E1000_NVM_INIT_CTRL2_MNGM 0x6000
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index e6fe090..b7c664f 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -216,6 +216,8 @@
#define E1000_CTRL_MEHE 0x00080000 /* Memory Error Handling Enable */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */
+#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */
#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
#define E1000_CTRL_RST 0x04000000 /* Global reset */
#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
@@ -310,6 +312,7 @@
/* SerDes Control */
#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+#define E1000_SCTL_ENABLE_SERDES_LOOPBACK 0x0410
/* Receive Checksum Control */
#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 23d5d90..8f5832c 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1432,8 +1432,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
/* special write to serdes control register to enable SerDes analog
* loopback
*/
-#define E1000_SERDES_LB_ON 0x410
- ew32(SCTL, E1000_SERDES_LB_ON);
+ ew32(SCTL, E1000_SCTL_ENABLE_SERDES_LOOPBACK);
e1e_flush();
usleep_range(10000, 20000);
@@ -1527,8 +1526,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
case e1000_82572:
if (hw->phy.media_type == e1000_media_type_fiber ||
hw->phy.media_type == e1000_media_type_internal_serdes) {
-#define E1000_SERDES_LB_OFF 0x400
- ew32(SCTL, E1000_SERDES_LB_OFF);
+ ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
e1e_flush();
usleep_range(10000, 20000);
break;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index b085ce1..b4eab18 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1957,7 +1957,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
ew32(RFCTL, rfctl);
}
-#define E1000_IVAR_INT_ALLOC_VALID 0x8
/* Configure Rx vector */
rx_ring->ims_val = E1000_IMS_RXQ0;
adapter->eiac_mask |= rx_ring->ims_val;
@@ -5911,10 +5910,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
}
ctrl = er32(CTRL);
- /* advertise wake from D3Cold */
- #define E1000_CTRL_ADVD3WUC 0x00100000
- /* phy power management enable */
- #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
ctrl |= E1000_CTRL_ADVD3WUC;
if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists