netdev - [PATCH net-next (TAKE 4) 4/6] firewire net: Ignore spd and max

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <515096C0.8030302@linux-ipv6.org>
Date:	Tue, 26 Mar 2013 03:26:08 +0900
From:	YOSHIFUJI Hideaki <yoshfuji@...ux-ipv6.org>
To:	davem@...emloft.net, stefanr@...6.in-berlin.de
CC:	netdev@...r.kernel.org, linux1394-devel@...ts.sourceforge.net,
	stephan.gatzka@...il.com, yoshfuji@...ux-ipv6.org
Subject: [PATCH net-next (TAKE 4) 4/6] firewire net: Ignore spd and max_payload
 advertised by ARP.

Stefan Richter <stefanr@...6.in-berlin.de> says:
| As far as I can tell, it would be best to ignore max_rec and sspd from ARP
| and NDP but keep using the respective information from firewire-core
| instead (handed over by fwnet_probe()).
|
| Why?  As I noted earlier, RFC 2734:1999 and RFC 3146:2001 were apparently
| written with a too simplistic notion of IEEE 1394 bus topology, resulting
| in max_rec and sspd in ARP-1394 and NDP-1394 to be useless, IMO.
|
| Consider a bus like this:
|
|     A ---- B ==== C
|
| A, B, C are all IP-over-1394 capable nodes.  ---- is an S400 cable hop,
| and ==== is an S800 cable hop.
|
| In case of unicasts or multicasts in which node A is involved as
| transmitter or receiver, as well as in case of broadcasts, the speeds
| S100, S200, S400 work and speed S400 is optimal.
|
| In case of anything else, IOW in case of unicasts or multicasts in which
| only nodes B and C are involved, the speeds S100, S200, S400, S800 work
| and speed S800 is optimal.
|
| Clearly, node A should indicate sspd = S400 in its ARP or NDP packets.
| But which sspd should nodes B and C set there?  Maybe they set S400, which
| would work but would waste half of the available bandwidth in the second
| case.  Or maybe they set S800, which is OK in the second case but would
| prohibit any communication with node A if blindly taken for correct.
|
| On the other hand, firewire-core *always* gives us the correct and optimum
| peer-to-peer speed and asynchronous packet payload, no matter how simple
| or complex the bus topology is and no matter in which temporal order nodes
| join the bus and are discovered.

CC: Stefan Richter <stefanr@...6.in-berlin.de>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@...ux-ipv6.org>
---
 drivers/firewire/net.c |   16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 72536e7..cb8aa86 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -552,8 +552,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		unsigned char *arp_ptr;
 		u64 fifo_addr;
 		u64 peer_guid;
-		unsigned sspd;
-		u16 max_payload;
 		struct fwnet_peer *peer;
 		unsigned long flags;

@@ -564,24 +562,10 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		fifo_addr = (u64)get_unaligned_be16(&arp1394->fifo_hi) << 32
 				| get_unaligned_be32(&arp1394->fifo_lo);

-		sspd = arp1394->sspd;
-		/* Sanity check.  OS X 10.3 PPC reportedly sends 131. */
-		if (sspd > SCODE_3200) {
-			dev_notice(&net->dev, "sspd %x out of range\n", sspd);
-			sspd = SCODE_3200;
-		}
-		max_payload = fwnet_max_payload(arp1394->max_rec, sspd);
-
 		spin_lock_irqsave(&dev->lock, flags);
 		peer = fwnet_peer_find_by_guid(dev, peer_guid);
 		if (peer) {
 			peer->fifo = fifo_addr;
-
-			if (peer->speed > sspd)
-				peer->speed = sspd;
-			if (peer->max_payload > max_payload)
-				peer->max_payload = max_payload;
-
 			peer->ip = arp1394->sip;
 		}
 		spin_unlock_irqrestore(&dev->lock, flags);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html