| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1364461215-7793-6-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Thu, 28 Mar 2013 02:00:08 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Bruce Allan <bruce.w.allan@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 05/12] e1000e: EEE capability advertisement not set/disabled as required
From: Bruce Allan <bruce.w.allan@...el.com>
Devices supported by the driver which support EEE (currently 82579, I217
and I218) are advertising EEE capabilities during auto-negotiation even
when EEE has been disabled. In addition to not acting as expected, this
also caused the EEE status reported by 'ethtool --show-eee' to be wrong
when two of these devices are connected back-to-back and EEE is disabled
on one. In addition to fixing this issue, the ability for the user to
specify which speeds (100 or 1000 full-duplex) to advertise EEE support
has been added.
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/e1000e/e1000.h | 3 ++
drivers/net/ethernet/intel/e1000e/ethtool.c | 63 +++++++++--------------------
drivers/net/ethernet/intel/e1000e/ich8lan.c | 55 ++++++++++++-------------
drivers/net/ethernet/intel/e1000e/ich8lan.h | 3 +-
drivers/net/ethernet/intel/e1000e/netdev.c | 36 +++++++++++++++++
5 files changed, 88 insertions(+), 72 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index e371f77..82f1c84 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -46,6 +46,7 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/ptp_classify.h>
#include <linux/mii.h>
+#include <linux/mdio.h>
#include "hw.h"
struct e1000_info;
@@ -350,6 +351,8 @@ struct e1000_adapter {
struct timecounter tc;
struct ptp_clock *ptp_clock;
struct ptp_clock_info ptp_clock_info;
+
+ u16 eee_advert;
};
struct e1000_info {
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index e835e7b..7c8ca65 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -35,7 +35,6 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
-#include <linux/mdio.h>
#include <linux/pm_runtime.h>
#include "e1000.h"
@@ -2076,23 +2075,20 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl;
- u32 status, ret_val;
+ u16 cap_addr, lpa_addr, pcs_stat_addr, phy_data;
+ u32 ret_val;
- if (!(adapter->flags & FLAG_IS_ICH) ||
- !(adapter->flags2 & FLAG2_HAS_EEE))
+ if (!(adapter->flags2 & FLAG2_HAS_EEE))
return -EOPNOTSUPP;
switch (hw->phy.type) {
case e1000_phy_82579:
cap_addr = I82579_EEE_CAPABILITY;
- adv_addr = I82579_EEE_ADVERTISEMENT;
lpa_addr = I82579_EEE_LP_ABILITY;
pcs_stat_addr = I82579_EEE_PCS_STATUS;
break;
case e1000_phy_i217:
cap_addr = I217_EEE_CAPABILITY;
- adv_addr = I217_EEE_ADVERTISEMENT;
lpa_addr = I217_EEE_LP_ABILITY;
pcs_stat_addr = I217_EEE_PCS_STATUS;
break;
@@ -2111,10 +2107,7 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data);
/* EEE Advertised */
- ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data);
- if (ret_val)
- goto release;
- edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+ edata->advertised = mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
/* EEE Link Partner Advertised */
ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data);
@@ -2132,25 +2125,11 @@ release:
if (ret_val)
return -ENODATA;
- e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl);
- status = er32(STATUS);
-
/* Result of the EEE auto negotiation - there is no register that
* has the status of the EEE negotiation so do a best-guess based
- * on whether both Tx and Rx LPI indications have been received or
- * base it on the link speed, the EEE advertised speeds on both ends
- * and the speeds on which EEE is enabled locally.
+ * on whether Tx or Rx LPI indications have been received.
*/
- if (((phy_data & E1000_EEE_TX_LPI_RCVD) &&
- (phy_data & E1000_EEE_RX_LPI_RCVD)) ||
- ((status & E1000_STATUS_SPEED_100) &&
- (edata->advertised & ADVERTISED_100baseT_Full) &&
- (edata->lp_advertised & ADVERTISED_100baseT_Full) &&
- (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) ||
- ((status & E1000_STATUS_SPEED_1000) &&
- (edata->advertised & ADVERTISED_1000baseT_Full) &&
- (edata->lp_advertised & ADVERTISED_1000baseT_Full) &&
- (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE)))
+ if (phy_data & (E1000_EEE_TX_LPI_RCVD | E1000_EEE_RX_LPI_RCVD))
edata->eee_active = true;
edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable;
@@ -2167,19 +2146,10 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
struct ethtool_eee eee_curr;
s32 ret_val;
- if (!(adapter->flags & FLAG_IS_ICH) ||
- !(adapter->flags2 & FLAG2_HAS_EEE))
- return -EOPNOTSUPP;
-
ret_val = e1000e_get_eee(netdev, &eee_curr);
if (ret_val)
return ret_val;
- if (eee_curr.advertised != edata->advertised) {
- e_err("Setting EEE advertisement is not supported\n");
- return -EINVAL;
- }
-
if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
e_err("Setting EEE tx-lpi is not supported\n");
return -EINVAL;
@@ -2190,16 +2160,21 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
return -EINVAL;
}
- if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) {
- hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
-
- /* reset the link */
- if (netif_running(netdev))
- e1000e_reinit_locked(adapter);
- else
- e1000e_reset(adapter);
+ if (edata->advertised & ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) {
+ e_err("EEE advertisement supports only 100TX and/or 1000T full-duplex\n");
+ return -EINVAL;
}
+ adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
+
+ hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
+
+ /* reset the link */
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+
return 0;
}
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 3b1c1a7..174507c 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -695,7 +695,7 @@ s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
*
* Assumes the SW/FW/HW Semaphore is already acquired.
**/
-static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
{
return __e1000_access_emi_reg_locked(hw, addr, &data, false);
}
@@ -712,11 +712,22 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
s32 ret_val;
- u16 lpi_ctrl;
+ u16 lpa, pcs_status, adv, adv_addr, lpi_ctrl, data;
- if ((hw->phy.type != e1000_phy_82579) &&
- (hw->phy.type != e1000_phy_i217))
+ switch (hw->phy.type) {
+ case e1000_phy_82579:
+ lpa = I82579_EEE_LP_ABILITY;
+ pcs_status = I82579_EEE_PCS_STATUS;
+ adv_addr = I82579_EEE_ADVERTISEMENT;
+ break;
+ case e1000_phy_i217:
+ lpa = I217_EEE_LP_ABILITY;
+ pcs_status = I217_EEE_PCS_STATUS;
+ adv_addr = I217_EEE_ADVERTISEMENT;
+ break;
+ default:
return 0;
+ }
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
@@ -731,34 +742,24 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
/* Enable EEE if not disabled by user */
if (!dev_spec->eee_disable) {
- u16 lpa, pcs_status, data;
-
/* Save off link partner's EEE ability */
- switch (hw->phy.type) {
- case e1000_phy_82579:
- lpa = I82579_EEE_LP_ABILITY;
- pcs_status = I82579_EEE_PCS_STATUS;
- break;
- case e1000_phy_i217:
- lpa = I217_EEE_LP_ABILITY;
- pcs_status = I217_EEE_PCS_STATUS;
- break;
- default:
- ret_val = -E1000_ERR_PHY;
- goto release;
- }
ret_val = e1000_read_emi_reg_locked(hw, lpa,
&dev_spec->eee_lp_ability);
if (ret_val)
goto release;
+ /* Read EEE advertisement */
+ ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &adv);
+ if (ret_val)
+ goto release;
+
/* Enable EEE only for speeds in which the link partner is
- * EEE capable.
+ * EEE capable and for which we advertise EEE.
*/
- if (dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED)
+ if (adv & dev_spec->eee_lp_ability & I82579_EEE_1000_SUPPORTED)
lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
- if (dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) {
+ if (adv & dev_spec->eee_lp_ability & I82579_EEE_100_SUPPORTED) {
e1e_rphy_locked(hw, MII_LPA, &data);
if (data & LPA_100FULL)
lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
@@ -770,13 +771,13 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
dev_spec->eee_lp_ability &=
~I82579_EEE_100_SUPPORTED;
}
-
- /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
- ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
- if (ret_val)
- goto release;
}
+ /* R/Clr IEEE MMD 3.1 bits 11:10 - Tx/Rx LPI Received */
+ ret_val = e1000_read_emi_reg_locked(hw, pcs_status, &data);
+ if (ret_val)
+ goto release;
+
ret_val = e1e_wphy_locked(hw, I82579_LPI_CTRL, lpi_ctrl);
release:
hw->phy.ops.release(hw);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 00ba6c9..21d21b9 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -212,7 +212,7 @@
#define I82577_MSE_THRESHOLD 0x0887 /* 82577 Mean Square Error Threshold */
#define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */
#define I82579_RX_CONFIG 0x3412 /* Receive configuration */
-#define I82579_EEE_PCS_STATUS 0x182D /* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_PCS_STATUS 0x182E /* IEEE MMD Register 3.1 >> 8 */
#define I82579_EEE_CAPABILITY 0x0410 /* IEEE MMD Register 3.20 */
#define I82579_EEE_ADVERTISEMENT 0x040E /* IEEE MMD Register 7.60 */
#define I82579_EEE_LP_ABILITY 0x040F /* IEEE MMD Register 7.61 */
@@ -268,4 +268,5 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
#endif /* _E1000E_ICH8LAN_H_ */
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 142ca39..0459fe3 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3875,6 +3875,38 @@ void e1000e_reset(struct e1000_adapter *adapter)
/* initialize systim and reset the ns time counter */
e1000e_config_hwtstamp(adapter);
+ /* Set EEE advertisement as appropriate */
+ if (adapter->flags2 & FLAG2_HAS_EEE) {
+ s32 ret_val;
+ u16 adv_addr;
+
+ switch (hw->phy.type) {
+ case e1000_phy_82579:
+ adv_addr = I82579_EEE_ADVERTISEMENT;
+ break;
+ case e1000_phy_i217:
+ adv_addr = I217_EEE_ADVERTISEMENT;
+ break;
+ default:
+ dev_err(&adapter->pdev->dev,
+ "Invalid PHY type setting EEE advertisement\n");
+ return;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ dev_err(&adapter->pdev->dev,
+ "EEE advertisement - unable to acquire PHY\n");
+ return;
+ }
+
+ e1000_write_emi_reg_locked(hw, adv_addr,
+ hw->dev_spec.ich8lan.eee_disable ?
+ 0 : adapter->eee_advert);
+
+ hw->phy.ops.release(hw);
+ }
+
if (!netif_running(adapter->netdev) &&
!test_bit(__E1000_TESTING, &adapter->state)) {
e1000_power_down_phy(adapter);
@@ -6540,6 +6572,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_flashmap;
}
+ /* Set default EEE advertisement */
+ if (adapter->flags2 & FLAG2_HAS_EEE)
+ adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
+
/* construct the net_device struct */
netdev->netdev_ops = &e1000e_netdev_ops;
e1000e_set_ethtool_ops(netdev);
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists