[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1365423003-23959-2-git-send-email-peppe.cavallaro@st.com>
Date: Mon, 8 Apr 2013 14:09:59 +0200
From: Giuseppe CAVALLARO <peppe.cavallaro@...com>
To: netdev@...r.kernel.org
Cc: eric.dumazet@...il.com, bhutchings@...arflare.com,
shiraz.hashim@...com, Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [net-next.git 1/5] stmmac: review driver documentation
This patch reviews the driver documentation file;
for example, there were some new fields (in the driver
module parameter section) and the ptp files were
not documented.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
Documentation/networking/stmmac.txt | 12 ++++++++----
1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 8efe0b3..654d2e5 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -1,6 +1,6 @@
STMicroelectronics 10/100/1000 Synopsys Ethernet driver
-Copyright (C) 2007-2010 STMicroelectronics Ltd
+Copyright (C) 2007-2013 STMicroelectronics Ltd
Author: Giuseppe Cavallaro <peppe.cavallaro@...com>
This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
@@ -10,7 +10,7 @@ Currently this network device driver is for all STM embedded MAC/GMAC
(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
FF1152AMT0221 D1215994A VIRTEX FPGA board.
-DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether
+DWC Ether MAC 10/100/1000 Universal version 3.70a (and older) and DWC Ether
MAC 10/100 Universal version 4.0 have been used for developing this driver.
This driver supports both the platform bus and PCI.
@@ -32,6 +32,8 @@ The kernel configuration option is STMMAC_ETH:
watchdog: transmit timeout (in milliseconds);
flow_ctrl: Flow control ability [on/off];
pause: Flow Control Pause Time;
+ eee_timer: tx EEE timer;
+ chain_mode: select chain mode instead of ring.
3) Command line options
Driver parameters can be also passed in command line by using:
@@ -164,12 +166,12 @@ Where:
o bus_setup: perform HW setup of the bus. For example, on some ST platforms
this field is used to configure the AMBA bridge to generate more
efficient STBus traffic.
- o init/exit: callbacks used for calling a custom initialisation;
+ o init/exit: callbacks used for calling a custom initialization;
this is sometime necessary on some platforms (e.g. ST boxes)
where the HW needs to have set some PIO lines or system cfg
registers.
o custom_cfg/custom_data: this is a custom configuration that can be passed
- while initialising the resources.
+ while initializing the resources.
o bsp_priv: another private poiter.
For MDIO bus The we have:
@@ -273,6 +275,8 @@ reset procedure etc).
o norm_desc.c: functions for handling normal descriptors;
o chain_mode.c/ring_mode.c:: functions to manage RING/CHAINED modes;
o mmc_core.c/mmc.h: Management MAC Counters;
+ o stmmac_hwtstamp.c: HW timestamp support for PTP
+ o stmmac_ptp.c: PTP 1588 clock
5) Debug Information
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists