| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1366327822-10741-5-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Thu, 18 Apr 2013 16:30:11 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: "Akeem G. Abodunrin" <akeem.g.abodunrin@...el.com>,
netdev@...r.kernel.org, gospo@...hat.com, sassmann@...hat.com,
Dan Carpenter <dan.carpenter@...cle.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 04/15] igb: Support for 100base-fx SFP
From: "Akeem G. Abodunrin" <akeem.g.abodunrin@...el.com>
This patch adds support for 100base-fx SFP and report proper link speed/duplex
via Ethtool.
v2: fix smatch warnings
CC: Dan Carpenter <dan.carpenter@...cle.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igb/e1000_hw.h | 3 +-
drivers/net/ethernet/intel/igb/igb_ethtool.c | 48 ++++++++++++++++++++--------
drivers/net/ethernet/intel/igb/igb_main.c | 18 ++++++++---
3 files changed, 50 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 0d5cf9c..f8cd124 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -98,7 +98,8 @@ enum e1000_mac_type {
enum e1000_media_type {
e1000_media_type_unknown = 0,
e1000_media_type_copper = 1,
- e1000_media_type_internal_serdes = 2,
+ e1000_media_type_fiber = 2,
+ e1000_media_type_internal_serdes = 3,
e1000_num_media_types
};
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index a3830a8..8499c48 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -178,27 +178,33 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ecmd->port = PORT_TP;
ecmd->phy_address = hw->phy.addr;
+ ecmd->transceiver = XCVR_INTERNAL;
} else {
ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
- SUPPORTED_Autoneg);
+ SUPPORTED_Pause);
- ecmd->advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg |
- ADVERTISED_Pause);
+ ecmd->advertising = ADVERTISED_FIBRE;
+
+ if (adapter->link_speed == SPEED_100)
+ ecmd->advertising = ADVERTISED_100baseT_Full;
+ else if (adapter->link_speed == SPEED_1000)
+ ecmd->advertising = ADVERTISED_1000baseT_Full;
+
+ if (hw->mac.autoneg == 1)
+ ecmd->advertising |= ADVERTISED_Autoneg;
ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
}
- ecmd->transceiver = XCVR_INTERNAL;
-
status = rd32(E1000_STATUS);
if (status & E1000_STATUS_LU) {
- if ((status & E1000_STATUS_SPEED_1000) ||
- hw->phy.media_type != e1000_media_type_copper)
+ if (status & E1000_STATUS_SPEED_1000)
ethtool_cmd_speed_set(ecmd, SPEED_1000);
else if (status & E1000_STATUS_SPEED_100)
ethtool_cmd_speed_set(ecmd, SPEED_100);
@@ -215,7 +221,11 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ecmd->duplex = -1;
}
- ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ if ((hw->phy.media_type == e1000_media_type_fiber) ||
+ hw->mac.autoneg)
+ ecmd->autoneg = AUTONEG_ENABLE;
+ else
+ ecmd->autoneg = AUTONEG_DISABLE;
/* MDI-X => 2; MDI =>1; Invalid =>0 */
if (hw->phy.media_type == e1000_media_type_copper)
@@ -266,9 +276,21 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
- hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ if (adapter->link_speed == SPEED_1000)
+ hw->phy.autoneg_advertised =
+ ADVERTISED_1000baseT_Full;
+ else if (adapter->link_speed == SPEED_100)
+ hw->phy.autoneg_advertised =
+ ADVERTISED_100baseT_Full;
+ } else {
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ }
ecmd->advertising = hw->phy.autoneg_advertised;
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 8496adf..0a465ae 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7008,11 +7008,19 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
if ((spd & 1) || (dplx & ~1))
goto err_inval;
- /* Fiber NIC's only allow 1000 Gbps Full duplex */
- if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
- spd != SPEED_1000 &&
- dplx != DUPLEX_FULL)
- goto err_inval;
+ /* Fiber NIC's only allow 1000 gbps Full duplex
+ * and 100Mbps Full duplex for 100baseFx sfp
+ */
+ if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) {
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ case SPEED_10 + DUPLEX_FULL:
+ case SPEED_100 + DUPLEX_HALF:
+ goto err_inval;
+ default:
+ break;
+ }
+ }
switch (spd + dplx) {
case SPEED_10 + DUPLEX_HALF:
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists