netdev - [net-next 5/8] ixgbe: fix register access during ethtool loopback test

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1366952231-16727-6-git-send-email-jeffrey.t.kirsher@intel.com>
Date:	Thu, 25 Apr 2013 21:57:08 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Emil Tantilov <emil.s.tantilov@...el.com>, netdev@...r.kernel.org,
	gospo@...hat.com, sassmann@...hat.com,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 5/8] ixgbe: fix register access during ethtool loopback test

From: Emil Tantilov <emil.s.tantilov@...el.com>

This patch cleans up the logic in ixgbe_setup_loopback_test() to only access
registers applicable to the MAC type. AUTOC is only valid on MACs older than
X540. MACC is used for X540.

In addition it removes a read of AUTOC and uses the stored value to force the
link up.

Signed-off-by: Emil Tantilov <emil.s.tantilov@...el.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 26 +++++++++++++-----------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index bbe00bc..509d3ae 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -1609,16 +1609,9 @@ static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 reg_data;
 
-	/* X540 needs to set the MACC.FLU bit to force link up */
-	if (adapter->hw.mac.type == ixgbe_mac_X540) {
-		reg_data = IXGBE_READ_REG(hw, IXGBE_MACC);
-		reg_data |= IXGBE_MACC_FLU;
-		IXGBE_WRITE_REG(hw, IXGBE_MACC, reg_data);
-	}
 
-	/* right now we only support MAC loopback in the driver */
-	reg_data = IXGBE_READ_REG(hw, IXGBE_HLREG0);
 	/* Setup MAC loopback */
+	reg_data = IXGBE_READ_REG(hw, IXGBE_HLREG0);
 	reg_data |= IXGBE_HLREG0_LPBK;
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg_data);
 
@@ -1626,10 +1619,19 @@ static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
 	reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE;
 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg_data);
 
-	reg_data = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-	reg_data &= ~IXGBE_AUTOC_LMS_MASK;
-	reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU;
-	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_data);
+	/* X540 needs to set the MACC.FLU bit to force link up */
+	if (adapter->hw.mac.type == ixgbe_mac_X540) {
+		reg_data = IXGBE_READ_REG(hw, IXGBE_MACC);
+		reg_data |= IXGBE_MACC_FLU;
+		IXGBE_WRITE_REG(hw, IXGBE_MACC, reg_data);
+	} else {
+		if (hw->mac.orig_autoc) {
+			reg_data = hw->mac.orig_autoc | IXGBE_AUTOC_FLU;
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_data);
+		} else {
+			return 10;
+		}
+	}
 	IXGBE_WRITE_FLUSH(hw);
 	usleep_range(10000, 20000);
 
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html