| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1368498506-25857-7-git-send-email-yinghai@kernel.org>
Date: Mon, 13 May 2013 19:28:25 -0700
From: Yinghai Lu <yinghai@...nel.org>
To: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Gu Zheng <guz.fnst@...fujitsu.com>, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, Yinghai Lu <yinghai@...nel.org>,
netdev@...r.kernel.org
Subject: [PATCH 6/7] PCI: Make sure VF's driver get attached after PF's
Found kernel try to load mlx4 drivers for VFs before
PF's is really loaded when the drivers are built-in, and kernel
command line include probe_vfs=63, num_vfs=63.
It turns that it also happen for hotadd path even drivers are
compiled as modules and if they loaded. Esp some VF share the
same driver with PF.
calling path:
device driver probe
==> pci_enable_sriov
==> virtfn_add
==> pci_dev_add
==> pci_bus_device_add
when pci_bus_device_add is called, the VF's driver will be attached.
and at that time PF's driver does not finish yet.
Need to move out pci_bus_device_add from virtfn_add and call it
later. Fix the problem for two path,
1. hotadd path: use device_schedule_callback.
2. for booting path, use initcall to call that for all VF's.
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
Cc: netdev@...r.kernel.org
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 7 +
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 -
drivers/net/ethernet/cisco/enic/enic_main.c | 2
drivers/net/ethernet/emulex/benet/be_main.c | 4 +
drivers/net/ethernet/intel/igb/igb_main.c | 11 ++
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 9 +-
drivers/net/ethernet/mellanox/mlx4/main.c | 2
drivers/net/ethernet/neterion/vxge/vxge-main.c | 3
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 5 +
drivers/net/ethernet/sfc/efx.c | 1
drivers/pci/iov.c | 73 +++++++++++++++++--
drivers/scsi/lpfc/lpfc_init.c | 2
include/linux/pci.h | 4 +
14 files changed, 115 insertions(+), 14 deletions(-)
Index: linux-2.6/drivers/net/ethernet/mellanox/mlx4/main.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/mellanox/mlx4/main.c
+++ linux-2.6/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -2308,6 +2308,8 @@ slave_start:
priv->pci_dev_data = pci_dev_data;
pci_set_drvdata(pdev, dev);
+ pci_bus_add_device_vfs(pdev);
+
return 0;
err_port:
Index: linux-2.6/drivers/pci/iov.c
===================================================================
--- linux-2.6.orig/drivers/pci/iov.c
+++ linux-2.6/drivers/pci/iov.c
@@ -66,7 +66,8 @@ static void virtfn_remove_bus(struct pci
pci_remove_bus(child);
}
-static int virtfn_add(struct pci_dev *dev, int id, int reset)
+static int virtfn_add(struct pci_dev *dev, int id, int reset,
+ struct pci_dev **ret)
{
int i;
int rc;
@@ -116,7 +117,6 @@ static int virtfn_add(struct pci_dev *de
pci_device_add(virtfn, virtfn->bus);
mutex_unlock(&iov->dev->sriov->lock);
- rc = pci_bus_add_device(virtfn);
sprintf(buf, "virtfn%u", id);
rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf);
if (rc)
@@ -127,6 +127,8 @@ static int virtfn_add(struct pci_dev *de
kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE);
+ if (ret)
+ *ret = virtfn;
return 0;
failed2:
@@ -141,6 +143,55 @@ failed1:
return rc;
}
+static void pci_bus_add_vf(struct pci_dev *dev)
+{
+ int rc;
+
+ if (!dev || !dev->is_virtfn || dev->is_added)
+ return;
+
+ rc = pci_bus_add_device(dev);
+}
+
+static void bus_add_vfs(struct device *device)
+{
+ struct pci_dev *dev = to_pci_dev(device);
+ int i, num_vfs = pci_num_vf(dev);
+
+ for (i = 0; i < num_vfs; i++) {
+ struct pci_bus *bus;
+ struct pci_dev *virtfn;
+
+ bus = pci_find_bus(pci_domain_nr(dev->bus), virtfn_bus(dev, i));
+ if (!bus)
+ continue;
+
+ virtfn = pci_get_slot(bus, virtfn_devfn(dev, i));
+ pci_bus_add_vf(virtfn);
+ pci_dev_put(virtfn);
+ }
+}
+void pci_bus_add_device_vfs(struct pci_dev *pdev)
+{
+ if (system_state == SYSTEM_BOOTING)
+ return;
+
+ device_schedule_callback(&pdev->dev, bus_add_vfs);
+}
+EXPORT_SYMBOL_GPL(pci_bus_add_device_vfs);
+
+/* Make sure all VFs get added before pci_sysfs_init */
+static int __init pci_bus_add_device_vfs_booting(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev)
+ pci_bus_add_vf(dev);
+
+ return 0;
+}
+device_initcall_sync(pci_bus_add_device_vfs_booting);
+
static void virtfn_remove(struct pci_dev *dev, int id, int reset)
{
char buf[VIRTFN_ID_LEN];
@@ -213,14 +264,22 @@ static void sriov_migration_task(struct
if (state == PCI_SRIOV_VFM_MI) {
writeb(PCI_SRIOV_VFM_AV, iov->mstate + i);
state = readb(iov->mstate + i);
- if (state == PCI_SRIOV_VFM_AV)
- virtfn_add(iov->self, i, 1);
+ if (state == PCI_SRIOV_VFM_AV) {
+ struct pci_dev *virtfn = NULL;
+
+ virtfn_add(iov->self, i, 1, &virtfn);
+ pci_bus_add_vf(virtfn);
+ }
} else if (state == PCI_SRIOV_VFM_MO) {
virtfn_remove(iov->self, i, 1);
writeb(PCI_SRIOV_VFM_UA, iov->mstate + i);
state = readb(iov->mstate + i);
- if (state == PCI_SRIOV_VFM_AV)
- virtfn_add(iov->self, i, 0);
+ if (state == PCI_SRIOV_VFM_AV) {
+ struct pci_dev *virtfn = NULL;
+
+ virtfn_add(iov->self, i, 0, &virtfn);
+ pci_bus_add_vf(virtfn);
+ }
}
}
@@ -356,7 +415,7 @@ static int sriov_enable(struct pci_dev *
initial = nr_virtfn;
for (i = 0; i < initial; i++) {
- rc = virtfn_add(dev, i, 0);
+ rc = virtfn_add(dev, i, 0, NULL);
if (rc)
goto failed;
}
Index: linux-2.6/include/linux/pci.h
===================================================================
--- linux-2.6.orig/include/linux/pci.h
+++ linux-2.6/include/linux/pci.h
@@ -1659,6 +1659,7 @@ void __iomem *pci_ioremap_bar(struct pci
#ifdef CONFIG_PCI_IOV
int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
+void pci_bus_add_device_vfs(struct pci_dev *dev);
void pci_disable_sriov(struct pci_dev *dev);
irqreturn_t pci_sriov_migration(struct pci_dev *dev);
int pci_num_vf(struct pci_dev *dev);
@@ -1670,6 +1671,9 @@ static inline int pci_enable_sriov(struc
{
return -ENODEV;
}
+static inline void pci_bus_add_device_vfs(struct pci_dev *dev)
+{
+}
static inline void pci_disable_sriov(struct pci_dev *dev)
{
}
Index: linux-2.6/drivers/net/ethernet/intel/igb/igb_main.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/intel/igb/igb_main.c
+++ linux-2.6/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2366,6 +2366,9 @@ static int igb_probe(struct pci_dev *pde
}
pm_runtime_put_noidle(&pdev->dev);
+
+ pci_bus_add_device_vfs(pdev);
+
return 0;
err_register:
@@ -7278,8 +7281,12 @@ static int igb_pci_sriov_configure(struc
#ifdef CONFIG_PCI_IOV
if (num_vfs == 0)
return igb_pci_disable_sriov(dev);
- else
- return igb_pci_enable_sriov(dev, num_vfs);
+ else {
+ int ret = igb_pci_enable_sriov(dev, num_vfs);
+ if (ret > 0)
+ pci_bus_add_device_vfs(dev);
+ return ret;
+ }
#endif
return 0;
}
Index: linux-2.6/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ linux-2.6/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -346,8 +346,13 @@ int ixgbe_pci_sriov_configure(struct pci
{
if (num_vfs == 0)
return ixgbe_pci_sriov_disable(dev);
- else
- return ixgbe_pci_sriov_enable(dev, num_vfs);
+ else {
+ int ret = ixgbe_pci_sriov_enable(dev, num_vfs);
+
+ if (ret > 0)
+ pci_bus_add_device_vfs(dev);
+ return ret;
+ }
}
static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
Index: linux-2.6/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ linux-2.6/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7658,6 +7658,8 @@ skip_sriov:
IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL,
true);
+ pci_bus_add_device_vfs(pdev);
+
return 0;
err_register:
Index: linux-2.6/drivers/scsi/lpfc/lpfc_init.c
===================================================================
--- linux-2.6.orig/drivers/scsi/lpfc/lpfc_init.c
+++ linux-2.6/drivers/scsi/lpfc/lpfc_init.c
@@ -10582,6 +10582,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev,
else
rc = lpfc_pci_probe_one_s3(pdev, pid);
+ pci_bus_add_device_vfs(pdev);
+
return rc;
}
Index: linux-2.6/drivers/net/ethernet/emulex/benet/be_main.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/emulex/benet/be_main.c
+++ linux-2.6/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4119,6 +4119,7 @@ static int lancer_recover_func(struct be
if (status)
goto err;
+ pci_bus_add_device_vfs(adapter->pdev);
if (netif_running(adapter->netdev)) {
status = be_open(adapter->netdev);
if (status)
@@ -4335,6 +4336,8 @@ static int be_probe(struct pci_dev *pdev
dev_info(&pdev->dev, "%s: %s %s port %c\n", nic_name(pdev),
func_name(adapter), mc_name(adapter), port_name);
+ pci_bus_add_device_vfs(pdev);
+
return 0;
unsetup:
@@ -4406,6 +4409,7 @@ static int be_resume(struct pci_dev *pde
rtnl_unlock();
}
+ pci_bus_add_device_vfs(adapter->pdev);
schedule_delayed_work(&adapter->func_recovery_work,
msecs_to_jiffies(1000));
netif_device_attach(netdev);
Index: linux-2.6/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
+++ linux-2.6/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
@@ -568,8 +568,11 @@ int qlcnic_pci_sriov_configure(struct pc
if (num_vfs == 0)
err = qlcnic_pci_sriov_disable(adapter);
- else
+ else {
err = qlcnic_pci_sriov_enable(adapter, num_vfs);
+ if (err > 0)
+ pci_bus_add_device_vfs(dev);
+ }
clear_bit(__QLCNIC_RESETTING, &adapter->state);
return err;
Index: linux-2.6/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ linux-2.6/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -3048,7 +3048,12 @@ int bnx2x_sriov_configure(struct pci_dev
pci_disable_sriov(dev);
return 0;
} else {
- return bnx2x_enable_sriov(bp);
+ int ret = bnx2x_enable_sriov(bp);
+
+ if (ret > 0)
+ pci_bus_add_device_vfs(dev);
+
+ return 0;
}
}
Index: linux-2.6/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ linux-2.6/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5749,10 +5749,12 @@ static int init_one(struct pci_dev *pdev
sriov:
#ifdef CONFIG_PCI_IOV
if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0)
- if (pci_enable_sriov(pdev, num_vf[func]) == 0)
+ if (pci_enable_sriov(pdev, num_vf[func]) == 0) {
dev_info(&pdev->dev,
"instantiated %u virtual functions\n",
num_vf[func]);
+ pci_bus_add_device_vfs(pdev);
+ }
#endif
return 0;
Index: linux-2.6/drivers/net/ethernet/cisco/enic/enic_main.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/cisco/enic/enic_main.c
+++ linux-2.6/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2524,6 +2524,8 @@ static int enic_probe(struct pci_dev *pd
goto err_out_dev_deinit;
}
+ pci_bus_add_device_vfs(pdev);
+
return 0;
err_out_dev_deinit:
Index: linux-2.6/drivers/net/ethernet/neterion/vxge/vxge-main.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ linux-2.6/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -4731,6 +4731,9 @@ vxge_probe(struct pci_dev *pdev, const s
vxge_hw_device_trace_level_get(hldev));
kfree(ll_config);
+
+ pci_bus_add_device_vfs(pdev);
+
return 0;
_exit6:
Index: linux-2.6/drivers/net/ethernet/sfc/efx.c
===================================================================
--- linux-2.6.orig/drivers/net/ethernet/sfc/efx.c
+++ linux-2.6/drivers/net/ethernet/sfc/efx.c
@@ -2822,6 +2822,7 @@ static int efx_pci_probe(struct pci_dev
netif_warn(efx, probe, efx->net_dev,
"pci_enable_pcie_error_reporting failed (%d)\n", rc);
+ pci_bus_add_device_vfs(pci_dev);
return 0;
fail4:
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists