netdev - Re: [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <519C9822.9040909@windriver.com>
Date:	Wed, 22 May 2013 18:04:18 +0800
From:	"tiejun.chen" <tiejun.chen@...driver.com>
To:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
CC:	Andrew Lunn <andrew@...n.ch>, Jason Cooper <jason@...edaemon.net>,
	<linux-kernel@...r.kernel.org>,
	Lennert Buytenhek <buytenh@...tstofly.org>,
	<netdev@...r.kernel.org>, <linuxppc-dev@...ts.ozlabs.org>,
	David Miller <davem@...emloft.net>,
	<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device
 tree nodes

On 05/22/2013 05:43 PM, Sebastian Hesselbarth wrote:
> On 05/21/2013 07:48 PM, Andrew Lunn wrote:
>> On Tue, May 21, 2013 at 06:41:44PM +0200, Sebastian Hesselbarth wrote:
>>> This patch adds orion-eth and mvmdio device tree nodes for DT enabled
>>> Dove boards. As there is only one ethernet controller on Dove, a default
>>> phy node is also added with a note to set its reg property on a per-board
>>> basis.
>>>
>>> Signed-off-by: Sebastian Hesselbarth<sebastian.hesselbarth@...il.com>
>>> ---
> ...
>>> +            ethernet-port@0 {
>>> +                device_type = "network";
>>> +                compatible = "marvell,orion-eth-port";
>>> +                reg =<0>;
>>> +                interrupts =<29>;
>>> +                /* overwrite MAC address in bootloader */
>>> +                local-mac-address = [00 00 00 00 00 00];
>>
>> Hi Sebastian
>>
>> Its probably a good idea to set the local administration bit in this
>> MAC address. i.e. first byte is 02.
>
> Andrew,
>
> we just need an invalid address here to trigger the default behavior of
> the driver and load the MAC address from its register. As PPC binding
> documentation also has all zero, I just took it.

The truth is in PPC case, often we set the real mac address with some variables 
like 'eth[x]addr' in u-boot prompt, then u-boot will parse that value to fill 
the dtb. At last the associated driver can get the actual mac address from the 
dtb. And especially for those older u-boot version, even you have to reset the 
'local-mac-address' property in dts directly with the real mac address before 
generate the dtb since the older u-boot have no this ability to fill dtb again 
before pass the kernel.

Tiejun

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html