netdev - Re: [net-next PATCH v3 1/6] net: cpsw: enhance pinctrl support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <51AF6A97.5060407@ti.com>
Date:	Wed, 5 Jun 2013 22:13:03 +0530
From:	Mugunthan V N <mugunthanvnm@...com>
To:	<davem@...emloft.net>
CC:	Tony Lindgren <tony@...mide.com>, <netdev@...r.kernel.org>,
	<devicetree-discuss@...ts.ozlabs.org>,
	Hebbar Gururaja <gururaja.hebbar@...com>,
	<benoit.cousson@...aro.org>, <linux-omap@...r.kernel.org>
Subject: Re: [net-next PATCH v3 1/6] net: cpsw: enhance pinctrl support

On 6/5/2013 9:19 PM, Tony Lindgren wrote:
> * Mugunthan V N <mugunthanvnm@...com> [130530 01:14]:
>> On 5/28/2013 7:35 PM, Mugunthan V N wrote:
>>> On 5/28/2013 3:06 AM, Tony Lindgren wrote:
>>>> * Mugunthan V N <mugunthanvnm@...com> [130526 11:28]:
>>>>> From: Hebbar Gururaja <gururaja.hebbar@...com>
>>>>>
>>>>> Amend cpsw controller to optionally take a pin control handle and set
>>>>> the state of the pins to:
>>>>>
>>>>> - "default" on boot, resume
>>>>> - "sleep" on suspend()
>>>>>
>>>>> This should make it possible to optimize energy usage for the pins
>>>>> for the suspend/resume cycle.
>>>>>
>>>>> If any of the above pin states are missing in dt, a warning message
>>>>> about the missing state is displayed.
>>>>> If certain pin-states are not available, to remove this warning message
>>>>> pass respective state name with null phandler.
>>>>>
>>>>> Signed-off-by: Hebbar Gururaja <gururaja.hebbar@...com>
>>>>> Signed-off-by: Mugunthan V N <mugunthanvnm@...com>
>>>>> ---
>>>>>   drivers/net/ethernet/ti/cpsw.c |   48
>>>>> ++++++++++++++++++++++++++++++++++++++++
>>>>>   1 file changed, 48 insertions(+)
>>>>>
>>>>> diff --git a/drivers/net/ethernet/ti/cpsw.c
>>>>> b/drivers/net/ethernet/ti/cpsw.c
>>>>> index 21a5b29..c9ed730 100644
>>>>> --- a/drivers/net/ethernet/ti/cpsw.c
>>>>> +++ b/drivers/net/ethernet/ti/cpsw.c
>>>>> @@ -35,6 +35,7 @@
>>>>>   #include <linux/if_vlan.h>
>>>>>     #include <linux/platform_data/cpsw.h>
>>>>> +#include <linux/pinctrl/consumer.h>
>>>>>     #include "cpsw_ale.h"
>>>>>   #include "cpts.h"
>>>>> @@ -351,6 +352,11 @@ struct cpsw_priv {
>>>>>       bool irq_enabled;
>>>>>       struct cpts *cpts;
>>>>>       u32 emac_port;
>>>>> +
>>>>> +    /* Two optional pin states - default & sleep */
>>>>> +    struct pinctrl        *pinctrl;
>>>>> +    struct pinctrl_state    *pins_def;
>>>>> +    struct pinctrl_state    *pins_sleep;
>>>>>   };
>>>> Which pins do you need to dynamically remux? If it's not all
>>>> the pins, you should have three sets: default, active and idle.
>>>> This way the static pins in the default group don't need to be
>>>> constantly toggled.
>>>>
>>>> Regards,
>>>>
>>>> Tony
>>> Tony
>>>
>>> I am using this for all the pins, in probe all the cpsw pins will
>>> be configured
>>> and i have used the same in suspend/resume callback for power saving.
>>>
>> Tony
>>
>> Do you have any comments on this, or is it ok with two pinctrl_state nodes?
> If you always need to remux all the pins, then yes that's fine with me.
>
> Regards,
>
> Tony
David

As Tony accepted the implementation, I will resend the patch series as one
of the patch (pasted below) in this series is already merged in net-next.

f6655d6  Mugunthan V N   ARM: dts: AM33XX: Add CPSW phy_id device tree 
data to am335x-evmsk Mon Jun 3 20:10:09 2013 +0000

Regards
Mugunthan V N
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html