| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1371522291.3495.63.camel@deadeye.wl.decadent.org.uk>
Date: Tue, 18 Jun 2013 03:24:51 +0100
From: Ben Hutchings <ben@...adent.org.uk>
To: David Miller <davem@...emloft.net>
Cc: netdev <netdev@...r.kernel.org>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [PATCH net-next 1/3] net: Move MII out from under NET_CORE and hide
it
All drivers that select MII also need to select NET_CORE because MII
depends on it. This is a bit ridiculous because NET_CORE is just a
menu option that doesn't enable any code by itself.
There is also no need for it to be a visible option, since its users
all select it.
Signed-off-by: Ben Hutchings <ben@...adent.org.uk>
---
arch/cris/arch-v10/drivers/Kconfig | 1 -
arch/cris/arch-v32/drivers/Kconfig | 1 -
drivers/net/Kconfig | 10 +++-------
drivers/net/ethernet/3com/Kconfig | 1 -
drivers/net/ethernet/Kconfig | 4 ----
drivers/net/ethernet/adaptec/Kconfig | 1 -
drivers/net/ethernet/adi/Kconfig | 1 -
drivers/net/ethernet/allwinner/Kconfig | 1 -
drivers/net/ethernet/amd/Kconfig | 2 --
drivers/net/ethernet/atheros/Kconfig | 4 ----
drivers/net/ethernet/broadcom/Kconfig | 2 --
drivers/net/ethernet/cirrus/Kconfig | 1 -
drivers/net/ethernet/davicom/Kconfig | 1 -
drivers/net/ethernet/dec/tulip/Kconfig | 1 -
drivers/net/ethernet/dlink/Kconfig | 1 -
drivers/net/ethernet/faraday/Kconfig | 1 -
drivers/net/ethernet/freescale/fs_enet/Kconfig | 1 -
drivers/net/ethernet/icplus/Kconfig | 1 -
drivers/net/ethernet/intel/Kconfig | 1 -
drivers/net/ethernet/micrel/Kconfig | 4 ----
drivers/net/ethernet/nuvoton/Kconfig | 1 -
drivers/net/ethernet/oki-semi/pch_gbe/Kconfig | 1 -
drivers/net/ethernet/packetengines/Kconfig | 1 -
drivers/net/ethernet/rdc/Kconfig | 1 -
drivers/net/ethernet/realtek/Kconfig | 3 ---
drivers/net/ethernet/renesas/Kconfig | 1 -
drivers/net/ethernet/sgi/Kconfig | 1 -
drivers/net/ethernet/sis/Kconfig | 2 --
drivers/net/ethernet/smsc/Kconfig | 5 -----
drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 -
drivers/net/ethernet/via/Kconfig | 2 --
drivers/net/usb/Kconfig | 4 ----
drivers/staging/silicom/Kconfig | 1 -
33 files changed, 3 insertions(+), 61 deletions(-)
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 5f2cdb3..8eab0c6 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -4,7 +4,6 @@ config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V10
select ETHERNET
- select NET_CORE
select MII
help
This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index c55971a..91c4e54 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -4,7 +4,6 @@ config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V32
select ETHERNET
- select NET_CORE
select MII
help
This option enables the ETRAX FS built-in 10/100Mbit Ethernet
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3835321..00aba08 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -25,6 +25,9 @@ menuconfig NETDEVICES
# that for each of the symbols.
if NETDEVICES
+config MII
+ tristate
+
config NET_CORE
default y
bool "Network core driver support"
@@ -100,13 +103,6 @@ config NET_FC
adaptor below. You also should have said Y to "SCSI support" and
"SCSI generic support".
-config MII
- tristate "Generic Media Independent Interface device support"
- help
- Most ethernet controllers have MII transceiver either as an external
- or internal device. It is safe to say Y or M here even if your
- ethernet card lacks MII.
-
config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index 1c71c76..f00c763 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -67,7 +67,6 @@ config PCMCIA_3C589
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on (PCI || EISA) && HAS_IOPORT
- select NET_CORE
select MII
---help---
This option enables driver support for a large number of 10Mbps and
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 18fd6fb..a989669 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -64,7 +64,6 @@ config JME
tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the PCI-Express gigabit ethernet adapters
@@ -96,7 +95,6 @@ config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
@@ -107,7 +105,6 @@ source "drivers/net/ethernet/8390/Kconfig"
config NET_NETX
tristate "NetX Ethernet support"
- select NET_CORE
select MII
depends on ARCH_NETX
---help---
@@ -125,7 +122,6 @@ source "drivers/net/ethernet/oki-semi/Kconfig"
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on HAS_IOMEM && HAS_DMA
- select NET_CORE
select MII
select PHYLIB
select CRC32
diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig
index 0bff571..5c804bb 100644
--- a/drivers/net/ethernet/adaptec/Kconfig
+++ b/drivers/net/ethernet/adaptec/Kconfig
@@ -22,7 +22,6 @@ config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig
index a948160..f952fff 100644
--- a/drivers/net/ethernet/adi/Kconfig
+++ b/drivers/net/ethernet/adi/Kconfig
@@ -23,7 +23,6 @@ config BFIN_MAC
tristate "Blackfin on-chip MAC support"
depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
select CRC32
- select NET_CORE
select MII
select PHYLIB
select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig
index 66d3532..53ad213 100644
--- a/drivers/net/ethernet/allwinner/Kconfig
+++ b/drivers/net/ethernet/allwinner/Kconfig
@@ -24,7 +24,6 @@ config SUN4I_EMAC
depends on ARCH_SUNXI
depends on OF
select CRC32
- select NET_CORE
select MII
select PHYLIB
---help---
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index 13d74aa..562df46 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -34,7 +34,6 @@ config AMD8111_ETH
tristate "AMD 8111 (new PCI LANCE) support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
If you have an AMD 8111-based PCI LANCE ethernet card,
@@ -60,7 +59,6 @@ config PCNET32
tristate "AMD PCnet32 PCI support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
index 36d6abd..55e3d7e 100644
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -22,7 +22,6 @@ config ATL2
tristate "Atheros L2 Fast Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the Atheros L2 fast ethernet adapter.
@@ -34,7 +33,6 @@ config ATL1
tristate "Atheros/Attansic L1 Gigabit Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the Atheros/Attansic L1 gigabit ethernet
@@ -47,7 +45,6 @@ config ATL1E
tristate "Atheros L1E Gigabit Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the Atheros L1E gigabit ethernet adapter.
@@ -59,7 +56,6 @@ config ATL1C
tristate "Atheros L1C Gigabit Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver supports the Atheros L1C gigabit ethernet adapter.
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 3e69b3f..1d680ba 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -22,7 +22,6 @@ config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE && HAS_DMA
select SSB
- select NET_CORE
select MII
---help---
If you have a network (Ethernet) controller of this type, say Y
@@ -54,7 +53,6 @@ config B44_PCI
config BCM63XX_ENET
tristate "Broadcom 63xx internal mac support"
depends on BCM63XX
- select NET_CORE
select MII
select PHYLIB
help
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 8388e36..7403dff 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -44,7 +44,6 @@ config CS89x0_PLATFORM
config EP93XX_ETH
tristate "EP93xx Ethernet support"
depends on ARM && ARCH_EP93XX
- select NET_CORE
select MII
help
This is a driver for the ethernet hardware included in EP93xx CPUs.
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
index 9745fe5..316c5e5 100644
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -6,7 +6,6 @@ config DM9000
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS || COLDFIRE
select CRC32
- select NET_CORE
select MII
---help---
Support for DM9000 chipset.
diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
index 1df33c7..eb9ba6e 100644
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -126,7 +126,6 @@ config WINBOND_840
tristate "Winbond W89c840 Ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver is for the Winbond W89c840 chip. It also works with
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
index ee26ce7..c543ac1 100644
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -36,7 +36,6 @@ config SUNDANCE
tristate "Sundance Alta support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver is for the Sundance "Alta" chip.
diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
index b8974b9..5918c689 100644
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -21,7 +21,6 @@ if NET_VENDOR_FARADAY
config FTMAC100
tristate "Faraday FTMAC100 10/100 Ethernet support"
depends on ARM
- select NET_CORE
select MII
---help---
This driver supports the FTMAC100 10/100 Ethernet controller
diff --git a/drivers/net/ethernet/freescale/fs_enet/Kconfig b/drivers/net/ethernet/freescale/fs_enet/Kconfig
index 268414d..be92229 100644
--- a/drivers/net/ethernet/freescale/fs_enet/Kconfig
+++ b/drivers/net/ethernet/freescale/fs_enet/Kconfig
@@ -1,7 +1,6 @@
config FS_ENET
tristate "Freescale Ethernet Driver"
depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
- select NET_CORE
select MII
select PHYLIB
diff --git a/drivers/net/ethernet/icplus/Kconfig b/drivers/net/ethernet/icplus/Kconfig
index 5119ef1..14a66e9 100644
--- a/drivers/net/ethernet/icplus/Kconfig
+++ b/drivers/net/ethernet/icplus/Kconfig
@@ -5,7 +5,6 @@
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI
- select NET_CORE
select MII
---help---
This driver supports IP1000 gigabit Ethernet cards.
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 05f7264..f0e7ed2 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -20,7 +20,6 @@ if NET_VENDOR_INTEL
config E100
tristate "Intel(R) PRO/100+ support"
depends on PCI
- select NET_CORE
select MII
---help---
This driver supports Intel(R) PRO/100 family of adapters.
diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
index fe42fc0..d16b11e 100644
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -22,7 +22,6 @@ if NET_VENDOR_MICREL
config ARM_KS8695_ETHER
tristate "KS8695 Ethernet support"
depends on ARM && ARCH_KS8695
- select NET_CORE
select MII
---help---
If you wish to compile a kernel for the KS8695 and want to
@@ -39,7 +38,6 @@ config KS8842
config KS8851
tristate "Micrel KS8851 SPI"
depends on SPI
- select NET_CORE
select MII
select CRC32
select EEPROM_93CX6
@@ -49,7 +47,6 @@ config KS8851
config KS8851_MLL
tristate "Micrel KS8851 MLL"
depends on HAS_IOMEM
- select NET_CORE
select MII
---help---
This platform driver is for Micrel KS8851 Address/data bus
@@ -58,7 +55,6 @@ config KS8851_MLL
config KSZ884X_PCI
tristate "Micrel KSZ8841/2 PCI"
depends on PCI
- select NET_CORE
select MII
select CRC32
---help---
diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig
index 334c171..01182b5 100644
--- a/drivers/net/ethernet/nuvoton/Kconfig
+++ b/drivers/net/ethernet/nuvoton/Kconfig
@@ -22,7 +22,6 @@ config W90P910_ETH
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900
select PHYLIB
- select NET_CORE
select MII
---help---
Say Y here if you want to use built-in Ethernet ports
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
index 34d05bf..cb22341 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
@@ -5,7 +5,6 @@
config PCH_GBE
tristate "OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
depends on PCI
- select NET_CORE
select MII
select PTP_1588_CLOCK_PCH
---help---
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
index cbbeca3..8d51800 100644
--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -21,7 +21,6 @@ if NET_PACKET_ENGINE
config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI
- select NET_CORE
select MII
---help---
If you have a Gigabit Ethernet card of this type, say Y and read
diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig
index c8ba4b3..2055f7e 100644
--- a/drivers/net/ethernet/rdc/Kconfig
+++ b/drivers/net/ethernet/rdc/Kconfig
@@ -22,7 +22,6 @@ config R6040
tristate "RDC R6040 Fast Ethernet Adapter support"
depends on PCI
select CRC32
- select NET_CORE
select MII
select PHYLIB
---help---
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 783fa8b..ae5d027 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -37,7 +37,6 @@ config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
@@ -52,7 +51,6 @@ config 8139TOO
tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
@@ -107,7 +105,6 @@ config R8169
depends on PCI
select FW_LOADER
select CRC32
- select NET_CORE
select MII
---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index 267eac0..544514e 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -5,7 +5,6 @@
config SH_ETH
tristate "Renesas SuperH Ethernet support"
select CRC32
- select NET_CORE
select MII
select MDIO_BITBANG
select PHYLIB
diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig
index c1c4bb8..e832f46 100644
--- a/drivers/net/ethernet/sgi/Kconfig
+++ b/drivers/net/ethernet/sgi/Kconfig
@@ -22,7 +22,6 @@ config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
select CRC32
- select NET_CORE
select MII
---help---
If you have a network (Ethernet) card of this type, say Y and read
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index f1135cc..68d052b 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -22,7 +22,6 @@ config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
@@ -39,7 +38,6 @@ config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index ff9e994..068fc44 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -37,7 +37,6 @@ config SMC9194
config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
- select NET_CORE
select MII
depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
MN10300 || COLDFIRE || ARM64)
@@ -57,7 +56,6 @@ config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
depends on PCMCIA
select CRC32
- select NET_CORE
select MII
---help---
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
@@ -70,7 +68,6 @@ config EPIC100
tristate "SMC EtherPower II"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
@@ -81,7 +78,6 @@ config EPIC100
config SMC911X
tristate "SMSC LAN911[5678] support"
select CRC32
- select NET_CORE
select MII
depends on (ARM || SUPERH || MN10300)
---help---
@@ -99,7 +95,6 @@ config SMSC911X
tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
depends on HAS_IOMEM
select CRC32
- select NET_CORE
select MII
select PHYLIB
---help---
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 43c1f32..6e52c0f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -1,7 +1,6 @@
config STMMAC_ETH
tristate "STMicroelectronics 10/100/1000 Ethernet driver"
depends on HAS_IOMEM && HAS_DMA
- select NET_CORE
select MII
select PHYLIB
select CRC32
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index 6a87097..8a049a2 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -21,7 +21,6 @@ config VIA_RHINE
tristate "VIA Rhine support"
depends on PCI
select CRC32
- select NET_CORE
select MII
---help---
If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
@@ -47,7 +46,6 @@ config VIA_VELOCITY
depends on (PCI || USE_OF)
select CRC32
select CRC_CCITT
- select NET_CORE
select MII
---help---
If you have a VIA "Velocity" based network card say Y here.
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 287cc62..d84bfd4 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -67,7 +67,6 @@ config USB_KAWETH
config USB_PEGASUS
tristate "USB Pegasus/Pegasus-II based ethernet device support"
- select NET_CORE
select MII
---help---
Say Y here if you know you have Pegasus or Pegasus-II based adapter.
@@ -83,7 +82,6 @@ config USB_PEGASUS
config USB_RTL8150
tristate "USB RTL8150 based ethernet device support"
- select NET_CORE
select MII
help
Say Y here if you have RTL8150 based usb-ethernet adapter.
@@ -95,7 +93,6 @@ config USB_RTL8150
config USB_RTL8152
tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
- select NET_CORE
select MII
help
This option adds support for Realtek RTL8152 based USB 2.0
@@ -106,7 +103,6 @@ config USB_RTL8152
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
- select NET_CORE
select MII
---help---
This driver supports several kinds of network links over USB,
diff --git a/drivers/staging/silicom/Kconfig b/drivers/staging/silicom/Kconfig
index eda2e7d..fc082db 100644
--- a/drivers/staging/silicom/Kconfig
+++ b/drivers/staging/silicom/Kconfig
@@ -32,7 +32,6 @@ config BPCTL
depends on PCI && NET
depends on m
select SBYPASS
- select NET_CORE
select MII
---help---
If you have a network (Ethernet) controller of this type, say Y
Download attachment "signature.asc" of type "application/pgp-signature" (829 bytes)
Powered by blists - more mailing lists