| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130619132028.GC13898@jack.whiskey>
Date: Wed, 19 Jun 2013 15:20:28 +0200
From: Andi Shyti <andi@...zian.org>
To: Joseph CHANG <josright123@...il.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
netdev@...r.kernel.org, joseph_chang@...icom.com.tw,
josright@...mail.com
Subject: Re: [PATCH 1/1] net: add dm9620 net usb driver
Hi Joseph,
had a fast look...
[ ... ]
> +static int dm9620_set_eeprom(struct net_device *net,
> + struct ethtool_eeprom *eeprom, u8 *data)
> +{
> + struct usbnet *dev = netdev_priv(net);
> + int offset = eeprom->offset;
> + int len = eeprom->len;
> + int done;
> +
> + if (eeprom->magic != MD96XX_EEPROM_MAGIC) {
> + netdev_err(dev->net, "EEPROM: magic value mismatch, magic = 0x%x\n",
> + eeprom->magic);
> + return -EINVAL;
> + }
> +
> + while (len > 0) {
> + if (len & 1 || offset & 1) {
> + int which = offset & 1;
> + u8 tmp[2];
> + dm_read_eeprom_word(dev, offset / 2, tmp);
> + tmp[which] = *data;
> + dm_write_eeprom_word(dev, offset / 2, tmp);
> + mdelay(10);
Please don't use mdelay, use msleep or possibly
msleep_interruptable
> + done = 1;
> + } else {
> + dm_write_eeprom_word(dev, offset / 2, data);
> + done = 2;
> + }
> + data += done;
> + offset += done;
> + len -= done;
> + }
> + return 0;
> +}
[ ... ]
> +static int dm9620_bind(struct usbnet *dev, struct usb_interface *intf)
> +{
> + int ret;
> + u8 mac[ETH_ALEN], id;
> + u16 value;
> +
> + ret = usbnet_get_endpoints(dev, intf);
> + if (ret)
> + goto out;
maybe here is better
if (ret)
return ret;
> +
> + dev->net->netdev_ops = &dm9620_netdev_ops;
> + dev->net->ethtool_ops = &dm9620_ethtool_ops;
> + dev->net->hard_header_len += DM_TX_OVERHEAD;
> + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
> +
> + /* ftp fail fixed */
> + dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD+1;
> +
> + dev->mii.dev = dev->net;
> + dev->mii.mdio_read = dm9620_mdio_read;
> + dev->mii.mdio_write = dm9620_mdio_write;
> + dev->mii.phy_id_mask = 0x1f;
> + dev->mii.reg_num_mask = 0x1f;
> + dev->mii.phy_id = DM9620_PHY_ID;
> +
> + /* reset */
> + dm_write_reg(dev, DM_NET_CTRL, 1);
> + udelay(20);
from Documentation/timers/timers-howto.txt:
SLEEPING FOR "A FEW" USECS ( < ~10us? ):
* Use udelay
use udelay if you want to sleep for less than 10us, otherwise use
usleep_range
> +
> + /* read MAC */
> + if (dm_read(dev, DM_PHY_ADDR, ETH_ALEN, mac) < 0) {
> + netdev_err(dev->net, "Error reading MAC address\n");
> + ret = -ENODEV;
> + goto out;
> + }
you can get read of the 'out' label if in all the goto you use
you just 'return -ENODEV;' instead of 'goto out;'
> +
> + /* Overwrite the auto-generated address only with good ones */
> + if (is_valid_ether_addr(mac))
> + memcpy(dev->net->dev_addr, mac, ETH_ALEN);
> + else {
> + netdev_warn(dev->net,
> + "dm9620: No valid MAC address in EEPROM, using %pM\n",
> + dev->net->dev_addr);
> + __dm9620_set_mac_address(dev);
> + }
> +
> + if (dm_read_reg(dev, DM_CHIP_ID, &id) < 0) {
> + netdev_err(dev->net, "Error reading chip ID\n");
> + ret = -ENODEV;
> + goto out;
same here
> + }
> +
> + dm_read(dev, DM_PID, 2, &value);
> +
> + /* Add for check Product dm9620a/21a */
> + if (value == 0x1269 || value == 0x0269)
> + dm_write_reg(dev, DM_MODE_CTRL, DM_MODE9620 | DM_MODE_CDC_DES);
> + else
> + dm_write_reg(dev, DM_MODE_CTRL, DM_MODE9620);
> +
> + dm_write_reg(dev, DM_RX_CRC_CTRL, DM_RX_RCSEN);
> +
> + /* power up phy */
> + dm_write_reg(dev, DM_GPR_CTRL, 1);
> + dm_write_reg(dev, DM_GPR_DATA, 0);
> +
> + /* receive broadcast packets */
> + dm9620_set_multicast(dev->net);
> +
> + dm9620_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
> +
> + /* TX Pause Packet Enable */
> + dm_write_reg(dev, DM_FCR, DM_FCR_TXPEN | DM_FCR_BKPM | DM_FCR_FLCE);
> +
> + /* ADVERTISE_PAUSE_CAP */
> + dm9620_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
> + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
> +
> + dm_write_reg(dev, DM_USB_CTRL, DM_USB_EP3ACK);
> +
> + mii_nway_restart(&dev->mii);
> +
> +out:
> + return ret;
yeah... you wouldn't need this anymore
> +}
> +
> +void dm9620_unbind(struct usbnet *dev, struct usb_interface *intf)
Should this be static?
> +{
> + netdev_warn(dev->net, "[dm962] Linux Driver = V2.6 - unbind\n");
> +}
> +
> +static int dm9620_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
> +{
> + u8 status;
> + int len;
> +
> + /* format:
> + b0: rx_flag
> + b1: rx status
> + b2: packet length (incl crc) low
> + b3: packet length (incl crc) high
> + b4..n-4: packet data
> + bn-3..bn: ethernet crc
> + */
Allow me this nitpick please check the coding style for comments
in Documentation/CodyngStyle:
For files in net/ and drivers/net/ the preferred style for long (multi-line)
comments is a little different.
/* The preferred comment style for files in net/ and
* drivers/net
* looks like this.
*
* It is nearly the same as the generally preferred
* comment style,
* but there is no initial almost-blank line.
*/
> + if (unlikely(skb->len < DM_RX_OVERHEAD)) {
> + dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
> + return 0;
> + }
> +
> + status = skb->data[1];
> + len = (skb->data[2] | (skb->data[3] << 8)) - 4;
> +
> + if (unlikely(status & 0xbf)) {
> + if (status & 0x01)
> + dev->net->stats.rx_fifo_errors++;
> + if (status & 0x02)
> + dev->net->stats.rx_crc_errors++;
> + if (status & 0x04)
> + dev->net->stats.rx_frame_errors++;
> + if (status & 0x20)
> + dev->net->stats.rx_missed_errors++;
> + if (status & 0x90)
> + dev->net->stats.rx_length_errors++;
> + return 0;
> + }
> +
> + skb_pull(skb, 4);
> + skb_trim(skb, len);
> +
> + return 1;
> +}
> +
> +static bool davicom_bulkout_fix(int len, unsigned fullp)
> +{
> + len = ((len+1)/2)*2;
> + len += 2;
> + if ((len % fullp) == 0)
> + return true;
> + return false;
personally here I like more the form
return !(len % fullp) ? true : false;
But this is more a nitpick, you don't really need to change
> +}
> +
> +static int dm9620_tx_oddadd_len(int len)
> +{
> + if (len & 1)
> + return 1;
> + return 0;
(len & 1) is the same as (len == 1), personally I find it a bit
ugly, I would rather write it differently:
return (len == 1) ? 1 : 0;
or if you like the '&'
return len & 1;
> +}
> +
> +static const struct usb_device_id products[] = {
> + {
> + USB_DEVICE(0x0a46, 0x9620), /* dm9620 */
> + .driver_info = (unsigned long)&dm9620_info,
> + },
> + {
> + USB_DEVICE(0x0a46, 0x9621), /* dm9621 */
> + .driver_info = (unsigned long)&dm9620_info,
> + },
> + {
> + USB_DEVICE(0x0a46, 0x9622), /* dm9622 */
> + .driver_info = (unsigned long)&dm9620_info,
> + },
> + {
> + USB_DEVICE(0x0a46, 0x0269), /* dm9620a */
> + .driver_info = (unsigned long)&dm9620_info,
> + },
> + {
> + USB_DEVICE(0x0a46, 0x1269), /* dm9621a */
> + .driver_info = (unsigned long)&dm9620_info,
> + },
> + {},
> +};
It would be cool if in the code we could have some logical
defines for all the hexadecimal values you are using all around
the code ;)
Andi
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists