| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1371888727-16422-5-git-send-email-jitendra.kalsaria@qlogic.com>
Date: Sat, 22 Jun 2013 04:12:03 -0400
From: Jitendra Kalsaria <jitendra.kalsaria@...gic.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <sony.chacko@...gic.com>,
<shahed.shaikh@...gic.com>, <Dept_NX_Linux_NIC_Driver@...gic.com>
Subject: [PATCH v2 net-next 4/8] qlcnic: Add support for PEX DMA method to read memory section of adapter dump
From: Shahed Shaikh <shahed.shaikh@...gic.com>
This patch adds support to read memory section of adapter
dump using PEX DMA method. This method significantly improves
total adapter dump collection time.
Signed-off-by: Shahed Shaikh <shahed.shaikh@...gic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@...gic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 3 +
.../net/ethernet/qlogic/qlcnic/qlcnic_minidump.c | 225 +++++++++++++++++++-
2 files changed, 221 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 28a1276..cc2c2c1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -393,6 +393,9 @@ struct qlcnic_fw_dump {
u32 size; /* total size of the dump */
void *data; /* dump data area */
struct qlcnic_dump_template_hdr *tmpl_hdr;
+ dma_addr_t phys_addr;
+ void *dma_buffer;
+ bool use_pex_dma;
};
/*
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
index 4b9bab1..ab8a674 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c
@@ -15,6 +15,7 @@
#define QLC_83XX_MINIDUMP_FLASH 0x520000
#define QLC_83XX_OCM_INDEX 3
#define QLC_83XX_PCI_INDEX 0
+#define QLC_83XX_DMA_ENGINE_INDEX 8
static const u32 qlcnic_ms_read_data[] = {
0x410000A8, 0x410000AC, 0x410000B8, 0x410000BC
@@ -32,6 +33,16 @@ static const u32 qlcnic_ms_read_data[] = {
#define QLCNIC_DUMP_MASK_MAX 0xff
+struct qlcnic_pex_dma_descriptor {
+ u32 read_data_size;
+ u32 dma_desc_cmd;
+ u32 src_addr_low;
+ u32 src_addr_high;
+ u32 dma_bus_addr_low;
+ u32 dma_bus_addr_high;
+ u32 rsvd[6];
+} __packed;
+
struct qlcnic_common_entry_hdr {
u32 type;
u32 offset;
@@ -90,7 +101,10 @@ struct __ocm {
} __packed;
struct __mem {
- u8 rsvd[24];
+ u32 desc_card_addr;
+ u32 dma_desc_cmd;
+ u32 start_dma_cmd;
+ u32 rsvd[3];
u32 addr;
u32 size;
} __packed;
@@ -466,12 +480,12 @@ skip_poll:
return l2->no_ops * l2->read_addr_num * sizeof(u32);
}
-static u32 qlcnic_read_memory(struct qlcnic_adapter *adapter,
- struct qlcnic_dump_entry *entry, __le32 *buffer)
+static u32 qlcnic_read_memory_test_agent(struct qlcnic_adapter *adapter,
+ struct __mem *mem, __le32 *buffer,
+ int *ret)
{
- u32 addr, data, test, ret = 0;
+ u32 addr, data, test;
int i, reg_read;
- struct __mem *mem = &entry->region.mem;
reg_read = mem->size;
addr = mem->addr;
@@ -480,7 +494,8 @@ static u32 qlcnic_read_memory(struct qlcnic_adapter *adapter,
dev_info(&adapter->pdev->dev,
"Unaligned memory addr:0x%x size:0x%x\n",
addr, reg_read);
- return -EINVAL;
+ *ret = -EINVAL;
+ return 0;
}
mutex_lock(&adapter->ahw->mem_lock);
@@ -499,7 +514,7 @@ static u32 qlcnic_read_memory(struct qlcnic_adapter *adapter,
if (printk_ratelimit()) {
dev_err(&adapter->pdev->dev,
"failed to read through agent\n");
- ret = -EINVAL;
+ *ret = -EIO;
goto out;
}
}
@@ -516,6 +531,181 @@ out:
return mem->size;
}
+/* DMA register base address */
+#define QLC_DMA_REG_BASE_ADDR(dma_no) (0x77320000 + (dma_no * 0x10000))
+
+/* DMA register offsets w.r.t base address */
+#define QLC_DMA_CMD_BUFF_ADDR_LOW 0
+#define QLC_DMA_CMD_BUFF_ADDR_HI 4
+#define QLC_DMA_CMD_STATUS_CTRL 8
+
+#define QLC_PEX_DMA_READ_SIZE (PAGE_SIZE * 16)
+
+static int qlcnic_start_pex_dma(struct qlcnic_adapter *adapter,
+ struct __mem *mem)
+{
+ struct qlcnic_dump_template_hdr *tmpl_hdr;
+ struct device *dev = &adapter->pdev->dev;
+ u32 dma_no, dma_base_addr, temp_addr;
+ int i, ret, dma_sts;
+
+ tmpl_hdr = adapter->ahw->fw_dump.tmpl_hdr;
+ dma_no = tmpl_hdr->saved_state[QLC_83XX_DMA_ENGINE_INDEX];
+ dma_base_addr = QLC_DMA_REG_BASE_ADDR(dma_no);
+
+ temp_addr = dma_base_addr + QLC_DMA_CMD_BUFF_ADDR_LOW;
+ ret = qlcnic_83xx_wrt_reg_indirect(adapter, temp_addr,
+ mem->desc_card_addr);
+ if (ret)
+ return ret;
+
+ temp_addr = dma_base_addr + QLC_DMA_CMD_BUFF_ADDR_HI;
+ ret = qlcnic_83xx_wrt_reg_indirect(adapter, temp_addr, 0);
+ if (ret)
+ return ret;
+
+ temp_addr = dma_base_addr + QLC_DMA_CMD_STATUS_CTRL;
+ ret = qlcnic_83xx_wrt_reg_indirect(adapter, temp_addr,
+ mem->start_dma_cmd);
+ if (ret)
+ return ret;
+
+ /* Wait for DMA to complete */
+ temp_addr = dma_base_addr + QLC_DMA_CMD_STATUS_CTRL;
+ for (i = 0; i < 400; i++) {
+ dma_sts = qlcnic_ind_rd(adapter, temp_addr);
+
+ if (dma_sts & BIT_1)
+ usleep_range(250, 500);
+ else
+ break;
+ }
+
+ if (i >= 400) {
+ dev_info(dev, "PEX DMA operation timed out");
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static u32 qlcnic_read_memory_pexdma(struct qlcnic_adapter *adapter,
+ struct __mem *mem,
+ __le32 *buffer, int *ret)
+{
+ struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+ u32 temp, dma_base_addr, size = 0, read_size = 0;
+ struct qlcnic_pex_dma_descriptor *dma_descr;
+ struct qlcnic_dump_template_hdr *tmpl_hdr;
+ struct device *dev = &adapter->pdev->dev;
+ dma_addr_t dma_phys_addr;
+ void *dma_buffer;
+
+ tmpl_hdr = fw_dump->tmpl_hdr;
+
+ /* Check if DMA engine is available */
+ temp = tmpl_hdr->saved_state[QLC_83XX_DMA_ENGINE_INDEX];
+ dma_base_addr = QLC_DMA_REG_BASE_ADDR(temp);
+ temp = qlcnic_ind_rd(adapter,
+ dma_base_addr + QLC_DMA_CMD_STATUS_CTRL);
+
+ if (!(temp & BIT_31)) {
+ dev_info(dev, "%s: DMA engine is not available\n", __func__);
+ *ret = -EIO;
+ return 0;
+ }
+
+ /* Create DMA descriptor */
+ dma_descr = kzalloc(sizeof(struct qlcnic_pex_dma_descriptor),
+ GFP_KERNEL);
+ if (!dma_descr) {
+ *ret = -ENOMEM;
+ return 0;
+ }
+
+ /* dma_desc_cmd 0:15 = 0
+ * dma_desc_cmd 16:19 = mem->dma_desc_cmd 0:3
+ * dma_desc_cmd 20:23 = pci function number
+ * dma_desc_cmd 24:31 = mem->dma_desc_cmd 8:15
+ */
+ dma_phys_addr = fw_dump->phys_addr;
+ dma_buffer = fw_dump->dma_buffer;
+ temp = 0;
+ temp = mem->dma_desc_cmd & 0xff0f;
+ temp |= (adapter->ahw->pci_func & 0xf) << 4;
+ dma_descr->dma_desc_cmd = (temp << 16) & 0xffff0000;
+ dma_descr->dma_bus_addr_low = LSD(dma_phys_addr);
+ dma_descr->dma_bus_addr_high = MSD(dma_phys_addr);
+ dma_descr->src_addr_high = 0;
+
+ /* Collect memory dump using multiple DMA operations if required */
+ while (read_size < mem->size) {
+ if (mem->size - read_size >= QLC_PEX_DMA_READ_SIZE)
+ size = QLC_PEX_DMA_READ_SIZE;
+ else
+ size = mem->size - read_size;
+
+ dma_descr->src_addr_low = mem->addr + read_size;
+ dma_descr->read_data_size = size;
+
+ /* Write DMA descriptor to MS memory*/
+ temp = sizeof(struct qlcnic_pex_dma_descriptor) / 16;
+ *ret = qlcnic_83xx_ms_mem_write128(adapter, mem->desc_card_addr,
+ (u32 *)dma_descr, temp);
+ if (*ret) {
+ dev_info(dev, "Failed to write DMA descriptor to MS memory at address 0x%x\n",
+ mem->desc_card_addr);
+ goto free_dma_descr;
+ }
+
+ *ret = qlcnic_start_pex_dma(adapter, mem);
+ if (*ret) {
+ dev_info(dev, "Failed to start PEX DMA operation\n");
+ goto free_dma_descr;
+ }
+
+ memcpy(buffer, dma_buffer, size);
+ buffer += size / 4;
+ read_size += size;
+ }
+
+free_dma_descr:
+ kfree(dma_descr);
+
+ return read_size;
+}
+
+static u32 qlcnic_read_memory(struct qlcnic_adapter *adapter,
+ struct qlcnic_dump_entry *entry, __le32 *buffer)
+{
+ struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
+ struct device *dev = &adapter->pdev->dev;
+ struct __mem *mem = &entry->region.mem;
+ u32 data_size;
+ int ret = 0;
+
+ if (fw_dump->use_pex_dma) {
+ data_size = qlcnic_read_memory_pexdma(adapter, mem, buffer,
+ &ret);
+ if (ret)
+ dev_info(dev,
+ "Failed to read memory dump using PEX DMA: mask[0x%x]\n",
+ entry->hdr.mask);
+ else
+ return data_size;
+ }
+
+ data_size = qlcnic_read_memory_test_agent(adapter, mem, buffer, &ret);
+ if (ret) {
+ dev_info(dev,
+ "Failed to read memory dump using test agent method: mask[0x%x]\n",
+ entry->hdr.mask);
+ return 0;
+ } else {
+ return data_size;
+ }
+}
+
static u32 qlcnic_dump_nop(struct qlcnic_adapter *adapter,
struct qlcnic_dump_entry *entry, __le32 *buffer)
{
@@ -893,6 +1083,12 @@ flash_temp:
tmpl_hdr = ahw->fw_dump.tmpl_hdr;
tmpl_hdr->drv_cap_mask = QLCNIC_DUMP_MASK_DEF;
+
+ if ((tmpl_hdr->version & 0xffffff) >= 0x20001)
+ ahw->fw_dump.use_pex_dma = true;
+ else
+ ahw->fw_dump.use_pex_dma = false;
+
ahw->fw_dump.enable = 1;
return 0;
@@ -910,7 +1106,9 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
struct qlcnic_fw_dump *fw_dump = &adapter->ahw->fw_dump;
struct qlcnic_dump_template_hdr *tmpl_hdr = fw_dump->tmpl_hdr;
static const struct qlcnic_dump_operations *fw_dump_ops;
+ struct device *dev = &adapter->pdev->dev;
struct qlcnic_hardware_context *ahw;
+ void *temp_buffer;
ahw = adapter->ahw;
@@ -944,6 +1142,16 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
tmpl_hdr->sys_info[0] = QLCNIC_DRIVER_VERSION;
tmpl_hdr->sys_info[1] = adapter->fw_version;
+ if (fw_dump->use_pex_dma) {
+ temp_buffer = dma_alloc_coherent(dev, QLC_PEX_DMA_READ_SIZE,
+ &fw_dump->phys_addr,
+ GFP_KERNEL);
+ if (!temp_buffer)
+ fw_dump->use_pex_dma = false;
+ else
+ fw_dump->dma_buffer = temp_buffer;
+ }
+
if (qlcnic_82xx_check(adapter)) {
ops_cnt = ARRAY_SIZE(qlcnic_fw_dump_ops);
fw_dump_ops = qlcnic_fw_dump_ops;
@@ -1002,6 +1210,9 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
return 0;
}
error:
+ if (fw_dump->use_pex_dma)
+ dma_free_coherent(dev, QLC_PEX_DMA_READ_SIZE,
+ fw_dump->dma_buffer, fw_dump->phys_addr);
vfree(fw_dump->data);
return -EINVAL;
}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists