[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1372232966-11507-1-git-send-email-abrodkin@synopsys.com>
Date: Wed, 26 Jun 2013 11:49:26 +0400
From: Alexey Brodkin <Alexey.Brodkin@...opsys.com>
To: <davem@...emloft.net>
CC: Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
<netdev@...r.kernel.org>,
"Andy Shevchenko" <andy.shevchenko@...il.com>,
Francois Romieu <romieu@...zoreil.com>,
Joe Perches <joe@...ches.com>,
Vineet Gupta <Vineet.Gupta1@...opsys.com>,
Mischa Jonker <Mischa.Jonker@...opsys.com>,
Arnd Bergmann <arnd@...db.de>,
Grant Likely <grant.likely@...aro.org>,
Rob Herring <rob.herring@...xeda.com>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
<linux-kernel@...r.kernel.org>,
<devicetree-discuss@...ts.ozlabs.org>,
Florian Fainelli <florian@...nwrt.org>,
David Laight <david.laight@...lab.com>
Subject: [PATCH] arc_emac: fix compile-time errors & warnings on PPC64
As reported by "kbuild test robot" there were some errors and warnings
on attempt to build kernel with "make ARCH=powerpc allmodconfig".
And this patch addresses both errors and warnings.
Below is a list of introduced changes:
1. Fix compile-time errors (misspellings in "dma_unmap_single") on PPC.
2. Use DMA address instead of "skb->data" as a pointer to data buffer.
This fixed warnings on pointer to int conversion on 64-bit systems.
3. Re-implemented initial allocation of Rx buffers in "arc_emac_open" in
the same way they're re-allocated during operation (receiving packets).
So once again DMA address could be used instead of "skb->data".
4. Explicitly use EMAC_BUFFER_SIZE for Rx buffers allocation.
Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com>
Cc: netdev@...r.kernel.org
Cc: Andy Shevchenko <andy.shevchenko@...il.com>
Cc: Francois Romieu <romieu@...zoreil.com>
Cc: Joe Perches <joe@...ches.com>
Cc: Vineet Gupta <vgupta@...opsys.com>
Cc: Mischa Jonker <mjonker@...opsys.com>
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Grant Likely <grant.likely@...aro.org>
Cc: Rob Herring <rob.herring@...xeda.com>
Cc: Paul Gortmaker <paul.gortmaker@...driver.com>
Cc: linux-kernel@...r.kernel.org
Cc: devicetree-discuss@...ts.ozlabs.org
Cc: Florian Fainelli <florian@...nwrt.org>
Cc: David Laight <david.laight@...lab.com>
---
drivers/net/ethernet/arc/emac_main.c | 65 ++++++++++++++++++++--------------
1 file changed, 39 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index 20345f6..f1b121e 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -171,8 +171,8 @@ static void arc_emac_tx_clean(struct net_device *ndev)
stats->tx_bytes += skb->len;
}
- dma_unmap_single(&ndev->dev, dma_unmap_addr(&tx_buff, addr),
- dma_unmap_len(&tx_buff, len), DMA_TO_DEVICE);
+ dma_unmap_single(&ndev->dev, dma_unmap_addr(tx_buff, addr),
+ dma_unmap_len(tx_buff, len), DMA_TO_DEVICE);
/* return the sk_buff to system */
dev_kfree_skb_irq(skb);
@@ -204,7 +204,6 @@ static int arc_emac_rx(struct net_device *ndev, int budget)
struct net_device_stats *stats = &priv->stats;
struct buffer_state *rx_buff = &priv->rx_buff[*last_rx_bd];
struct arc_emac_bd *rxbd = &priv->rxbd[*last_rx_bd];
- unsigned int buflen = EMAC_BUFFER_SIZE;
unsigned int pktlen, info = le32_to_cpu(rxbd->info);
struct sk_buff *skb;
dma_addr_t addr;
@@ -226,7 +225,7 @@ static int arc_emac_rx(struct net_device *ndev, int budget)
netdev_err(ndev, "incomplete packet received\n");
/* Return ownership to EMAC */
- rxbd->info = cpu_to_le32(FOR_EMAC | buflen);
+ rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE);
stats->rx_errors++;
stats->rx_length_errors++;
continue;
@@ -240,11 +239,12 @@ static int arc_emac_rx(struct net_device *ndev, int budget)
skb->dev = ndev;
skb->protocol = eth_type_trans(skb, ndev);
- dma_unmap_single(&ndev->dev, dma_unmap_addr(&rx_buff, addr),
- dma_unmap_len(&rx_buff, len), DMA_FROM_DEVICE);
+ dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr),
+ dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE);
/* Prepare the BD for next cycle */
- rx_buff->skb = netdev_alloc_skb_ip_align(ndev, buflen);
+ rx_buff->skb = netdev_alloc_skb_ip_align(ndev,
+ EMAC_BUFFER_SIZE);
if (unlikely(!rx_buff->skb)) {
stats->rx_errors++;
/* Because receive_skb is below, increment rx_dropped */
@@ -256,7 +256,7 @@ static int arc_emac_rx(struct net_device *ndev, int budget)
netif_receive_skb(skb);
addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data,
- buflen, DMA_FROM_DEVICE);
+ EMAC_BUFFER_SIZE, DMA_FROM_DEVICE);
if (dma_mapping_error(&ndev->dev, addr)) {
if (net_ratelimit())
netdev_err(ndev, "cannot dma map\n");
@@ -264,16 +264,16 @@ static int arc_emac_rx(struct net_device *ndev, int budget)
stats->rx_errors++;
continue;
}
- dma_unmap_addr_set(&rx_buff, mapping, addr);
- dma_unmap_len_set(&rx_buff, len, buflen);
+ dma_unmap_addr_set(rx_buff, addr, addr);
+ dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE);
- rxbd->data = cpu_to_le32(rx_buff->skb->data);
+ rxbd->data = cpu_to_le32(addr);
/* Make sure pointer to data buffer is set */
wmb();
/* Return ownership to EMAC */
- rxbd->info = cpu_to_le32(FOR_EMAC | buflen);
+ rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE);
}
return work_done;
@@ -376,8 +376,6 @@ static int arc_emac_open(struct net_device *ndev)
{
struct arc_emac_priv *priv = netdev_priv(ndev);
struct phy_device *phy_dev = priv->phy_dev;
- struct arc_emac_bd *bd;
- struct sk_buff *skb;
int i;
phy_dev->autoneg = AUTONEG_ENABLE;
@@ -395,25 +393,40 @@ static int arc_emac_open(struct net_device *ndev)
}
}
+ priv->last_rx_bd = 0;
+
/* Allocate and set buffers for Rx BD's */
- bd = priv->rxbd;
for (i = 0; i < RX_BD_NUM; i++) {
- skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE);
- if (unlikely(!skb))
+ dma_addr_t addr;
+ unsigned int *last_rx_bd = &priv->last_rx_bd;
+ struct arc_emac_bd *rxbd = &priv->rxbd[*last_rx_bd];
+ struct buffer_state *rx_buff = &priv->rx_buff[*last_rx_bd];
+
+ rx_buff->skb = netdev_alloc_skb_ip_align(ndev,
+ EMAC_BUFFER_SIZE);
+ if (unlikely(!rx_buff->skb))
+ return -ENOMEM;
+
+ addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data,
+ EMAC_BUFFER_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&ndev->dev, addr)) {
+ netdev_err(ndev, "cannot dma map\n");
+ dev_kfree_skb(rx_buff->skb);
return -ENOMEM;
+ }
+ dma_unmap_addr_set(rx_buff, addr, addr);
+ dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE);
- priv->rx_buff[i].skb = skb;
- bd->data = cpu_to_le32(skb->data);
+ rxbd->data = cpu_to_le32(addr);
/* Make sure pointer to data buffer is set */
wmb();
- /* Set ownership to EMAC */
- bd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE);
- bd++;
- }
+ /* Return ownership to EMAC */
+ rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE);
- priv->last_rx_bd = 0;
+ *last_rx_bd = (*last_rx_bd + 1) % RX_BD_NUM;
+ }
/* Clean Tx BD's */
memset(priv->txbd, 0, TX_RING_SZ);
@@ -543,11 +556,11 @@ static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev)
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
- dma_unmap_addr_set(&priv->tx_buff[*txbd_curr], mapping, addr);
+ dma_unmap_addr_set(&priv->tx_buff[*txbd_curr], addr, addr);
dma_unmap_len_set(&priv->tx_buff[*txbd_curr], len, len);
priv->tx_buff[*txbd_curr].skb = skb;
- priv->txbd[*txbd_curr].data = cpu_to_le32(skb->data);
+ priv->txbd[*txbd_curr].data = cpu_to_le32(addr);
/* Make sure pointer to data buffer is set */
wmb();
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists