[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1372397822.9243.22.camel@envy.home>
Date: Thu, 27 Jun 2013 22:37:02 -0700
From: Darren Hart <dvhart@...ux.intel.com>
To: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Cc: "H. Peter Anvin" <hpa@...or.com>, peter.p.waskiewicz.jr@...el.com,
andriy.shevchenko@...ux.intel.com, danders@...cuitco.com,
vishal.l.verma@...el.com, "David S. Miller" <davem@...emloft.net>,
netdev@...r.kernel.org
Subject: Re: [PATCH 8/8] pch_gbe: Add MinnowBoard support
On Tue, 2013-06-25 at 18:53 -0700, Darren Hart wrote:
> The MinnowBoard uses an AR803x PHY with the PCH GBE.
>
> It does not implement the RGMII 2ns TX clock delay in the trace routing
> nor via strapping. Add a detection method for the board and the PHY and
> enable the tx clock delay via the registers.
>
> This PHY will hibernate without link for 10 seconds. Ensure the PHY is
> awake for probe and then disable hibernation. A future improvement would
> be to convert pch_gbe to using PHYLIB and making sure we can wake the
> PHY at the necessary times rather than permanently disabling it.
>
> Use the MinnowBoard PCI subsystem ID to identify the board and setup the
> appropriate callbacks in a new pci_id driver_data structure.
>
Per the discussion on the minnowboard platform drivers in this series
(which provide the minnow_phy_reset() function), I will be rewriting
this patch to provide its own phy_physical_reset() or similar which will
look like the other two phy functions I've added and will take a GPIO
line as an argument, determined by pci_id.
Please disregard this patch for now.
Thanks,
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Technical Lead - Linux Kernel
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists