| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 28 Jun 2013 14:02:52 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: "David S . Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
Darren Hart <dvhart@...ux.intel.com>,
Joe Perches <joe@...ches.com>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v3 1/3] pch_gbe: remove inline keyword for exported functions
There is no much sense to mark functions inline that are going to be used in
the other compile modules.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c | 21 +++++++++++----------
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 2 +-
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c | 3 +--
3 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 5ae03e8..82e72b2 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -19,6 +19,7 @@
*/
#include "pch_gbe.h"
#include "pch_gbe_phy.h"
+#include "pch_gbe_api.h"
/* bus type values */
#define pch_gbe_bus_type_unknown 0
@@ -112,7 +113,7 @@ static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
* 0: Successfully
* ENOSYS: Function is not registered
*/
-inline s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
+s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
{
if (!hw->reg) {
pr_err("ERROR: Registers not mapped\n");
@@ -126,7 +127,7 @@ inline s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
* pch_gbe_hal_get_bus_info - Obtain bus information for adapter
* @hw: Pointer to the HW structure
*/
-inline void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
+void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
{
if (!hw->func->get_bus_info)
pr_err("ERROR: configuration\n");
@@ -141,7 +142,7 @@ inline void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
* 0: Successfully
* ENOSYS: Function is not registered
*/
-inline s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
+s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
{
if (!hw->func->init_hw) {
pr_err("ERROR: configuration\n");
@@ -159,7 +160,7 @@ inline s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
* 0: Successfully
* Negative value: Failed
*/
-inline s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
+s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
u16 *data)
{
if (!hw->func->read_phy_reg)
@@ -176,7 +177,7 @@ inline s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
* 0: Successfully
* Negative value: Failed
*/
-inline s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
+s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
u16 data)
{
if (!hw->func->write_phy_reg)
@@ -188,7 +189,7 @@ inline s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
* pch_gbe_hal_phy_hw_reset - Hard PHY reset
* @hw: Pointer to the HW structure
*/
-inline void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
+void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
{
if (!hw->func->reset_phy)
pr_err("ERROR: configuration\n");
@@ -200,7 +201,7 @@ inline void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
* pch_gbe_hal_phy_sw_reset - Soft PHY reset
* @hw: Pointer to the HW structure
*/
-inline void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
+void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
{
if (!hw->func->sw_reset_phy)
pr_err("ERROR: configuration\n");
@@ -215,7 +216,7 @@ inline void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
* 0: Successfully
* ENOSYS: Function is not registered
*/
-inline s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
+s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
{
if (!hw->func->read_mac_addr) {
pr_err("ERROR: configuration\n");
@@ -228,7 +229,7 @@ inline s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
* pch_gbe_hal_power_up_phy - Power up PHY
* @hw: Pointer to the HW structure
*/
-inline void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw)
+void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw)
{
if (hw->func->power_up_phy)
hw->func->power_up_phy(hw);
@@ -238,7 +239,7 @@ inline void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw)
* pch_gbe_hal_power_down_phy - Power down PHY
* @hw: Pointer to the HW structure
*/
-inline void pch_gbe_hal_power_down_phy(struct pch_gbe_hw *hw)
+void pch_gbe_hal_power_down_phy(struct pch_gbe_hw *hw)
{
if (hw->func->power_down_phy)
hw->func->power_down_phy(hw);
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 0c1c65a..16d5ffa 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -287,7 +287,7 @@ static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0;
}
-inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw)
+static inline void pch_gbe_mac_load_mac_addr(struct pch_gbe_hw *hw)
{
iowrite32(0x01, &hw->reg->MAC_ADDR_LOAD);
}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
index 28bb960..b97c657 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
@@ -235,7 +235,7 @@ void pch_gbe_phy_power_down(struct pch_gbe_hw *hw)
* pch_gbe_phy_set_rgmii - RGMII interface setting
* @hw: Pointer to the HW structure
*/
-inline void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
+void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
{
pch_gbe_phy_sw_reset(hw);
}
@@ -270,5 +270,4 @@ void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg);
mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX;
pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg);
-
}
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists