netdev - Re: [PATCH v6 5/7] ARM: kirkwood: remove redundant DT board files

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <51D36274.6020204@gmail.com>
Date:	Wed, 03 Jul 2013 01:29:56 +0200
From:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
To:	Arnaud Ebalard <arno@...isbad.org>
CC:	Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
	Andrew Lunn <andrew@...n.ch>,
	Russell King <linux@....linux.org.uk>,
	Jason Cooper <jason@...edaemon.net>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Gregory CLEMENT <gregory.clement@...e-electrons.com>,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v6 5/7] ARM: kirkwood: remove redundant DT board files

On 07/03/2013 01:09 AM, Arnaud Ebalard wrote:
> Hi Sebastian,
>
> Sebastian Hesselbarth<sebastian.hesselbarth@...il.com>  writes:
>
>> With DT support for mv643xx_eth board specific init for some boards now
>> is unneccessary. Remove those board files, Kconfig entries, and
>> corresponding entries in kirkwood_defconfig.
>
> Applying above your set an old quilt cleaning patch Jason asked at some
> point, it became empty except for arch/arm/mach_kirkwood/common.h in
> which some declarations were left behind. If this is correct, can you
> just merge the hunks below in your 5/7 in next round?
>
> AFAICT, only dnskw_init() remains, which matches the list of board-*.c
> files in arch/arm/mach_kirkwood/ (i.e. board-dt.c and board-dnskw.c).

Arnaud,

thanks for sending this! I will squash it into v6 and send a v7 of this
patch. Looks like ARM SoC pull request causes some issues with Russell's
tree, so there is plenty of time left to resend (and re-test :))

And you are right, only board-dt.c and board-dnskw.c remain in
mach-kirkwood. With irqchip/clocksource patches in, IMHO kirkwood is
quite ready for mach-mvebu. mach-dove is still missing DT pcie, and I 
haven't had any success to get my hands on a board with pcie to test,
yet.

Sebastian

> Signed-off-by: Arnaud Ebalard<arno@...isbad.org>
> ---
>   arch/arm/mach-kirkwood/common.h | 108 ----------------------------------------
>   1 file changed, 108 deletions(-)
>
> diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
> index 1c09f3f..1cbdd2b 100644
> --- a/arch/arm/mach-kirkwood/common.h
> +++ b/arch/arm/mach-kirkwood/common.h
> @@ -57,26 +57,6 @@ void kirkwood_restart(char, const char *);
>   void kirkwood_clk_init(void);
>
>   /* board init functions for boards not fully converted to fdt */
> -#ifdef CONFIG_MACH_DREAMPLUG_DT
> -void dreamplug_init(void);
> -#else
> -static inline void dreamplug_init(void) {};
> -#endif
> -#ifdef CONFIG_MACH_GURUPLUG_DT
> -void guruplug_dt_init(void);
> -#else
> -static inline void guruplug_dt_init(void) {};
> -#endif
> -#ifdef CONFIG_MACH_SHEEVAPLUG_DT
> -void sheevaplug_dt_init(void);
> -#else
> -static inline void sheevaplug_dt_init(void) {};
> -#endif
> -#ifdef CONFIG_MACH_TS219_DT
> -void qnap_dt_ts219_init(void);
> -#else
> -static inline void qnap_dt_ts219_init(void) {};
> -#endif
>
>   #ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
>   void dnskw_init(void);
> @@ -84,94 +64,6 @@ void dnskw_init(void);
>   static inline void dnskw_init(void) {};
>   #endif
>
> -#ifdef CONFIG_MACH_ICONNECT_DT
> -void iconnect_init(void);
> -#else
> -static inline void iconnect_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_IB62X0_DT
> -void ib62x0_init(void);
> -#else
> -static inline void ib62x0_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_DOCKSTAR_DT
> -void dockstar_dt_init(void);
> -#else
> -static inline void dockstar_dt_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_GOFLEXNET_DT
> -void goflexnet_init(void);
> -#else
> -static inline void goflexnet_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_LSXL_DT
> -void lsxl_init(void);
> -#else
> -static inline void lsxl_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
> -void iomega_ix2_200_init(void);
> -#else
> -static inline void iomega_ix2_200_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
> -void km_kirkwood_init(void);
> -#else
> -static inline void km_kirkwood_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_DB88F628X_BP_DT
> -void db88f628x_init(void);
> -#else
> -static inline void db88f628x_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_MPLCEC4_DT
> -void mplcec4_init(void);
> -#else
> -static inline void mplcec4_init(void) {};
> -#endif
> -
> -#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
> -	defined(CONFIG_MACH_NETSPACE_V2_DT) || \
> -	defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
> -	defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
> -	defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
> -void ns2_init(void);
> -#else
> -static inline void ns2_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
> -void openblocks_a6_init(void);
> -#else
> -static inline void openblocks_a6_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_READYNAS_DT
> -void netgear_readynas_init(void);
> -#else
> -static inline void netgear_readynas_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_TOPKICK_DT
> -void usi_topkick_init(void);
> -#else
> -static inline void usi_topkick_init(void) {};
> -#endif
> -
> -#ifdef CONFIG_MACH_CLOUDBOX_DT
> -void cloudbox_init(void);
> -#else
> -static inline void cloudbox_init(void) {};
> -#endif
> -
>   /* early init functions not converted to fdt yet */
>   char *kirkwood_id(void);
>   void kirkwood_l2_init(void);

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html