lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <51DDE757.2080103@gmail.com>
Date:	Thu, 11 Jul 2013 00:59:35 +0200
From:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
To:	Gerlando Falauto <gerlando.falauto@...mile.com>
CC:	Jonas Gorski <jogo@...nwrt.org>,
	Lennert Buytenhek <buytenh@...tstofly.org>,
	netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH] net: mv643xx_eth: fix DT port device name

On 07/10/2013 12:29 PM, Gerlando Falauto wrote:
> Hi Sebastian, Jonas,
>
> first of all thank you for your HUGE efforts in this area.
>
> On 07/08/2013 12:05 AM, Jonas Gorski wrote:
>> On Sun, 7 Jul 2013 23:43:41 +0200
>> Jonas Gorski <jogo@...nwrt.org> wrote:
>>
>>> On Sun,  7 Jul 2013 22:33:51 +0200
>>> Sebastian Hesselbarth <sebastian.hesselbarth@...il.com> wrote:
>>>
>>>> Device tree support added to Marvell MV643xx ethernet driver registers
>>>> port devices from port device nodes found on the corresponding
>>>> controller
>>>> node. The current port device name will cause the second controller to
>>>> fail on registration because of two identical device names. This fixes
>>>> the issue by taking the device node's name also as port device name.
>>>>
>>>> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
>>>> Reported-by: Jonas Gorski <jogo@...nwrt.org>
>>>> ---
>>>> Cc: Lennert Buytenhek <buytenh@...tstofly.org>
>>>> Cc: Jonas Gorski <jogo@...nwrt.org>
>>>> Cc: netdev@...r.kernel.org
>>>> Cc: linux-arm-kernel@...ts.infradead.org
>>>> Cc: linux-kernel@...r.kernel.org
>>>> ---
>>>>   drivers/net/ethernet/marvell/mv643xx_eth.c |    2 +-
>>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c
>>>> b/drivers/net/ethernet/marvell/mv643xx_eth.c
>>>> index 6495bea..1f3a03d 100644
>>>> --- a/drivers/net/ethernet/marvell/mv643xx_eth.c
>>>> +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
>>>> @@ -2521,7 +2521,7 @@ static int
>>>> mv643xx_eth_shared_of_add_port(struct platform_device *pdev,
>>>>           of_property_read_u32(pnp, "duplex", &ppd.duplex);
>>>>       }
>>>>
>>>> -    ppdev = platform_device_alloc(MV643XX_ETH_NAME, ppd.port_number);
>>>> +    ppdev = platform_device_alloc(pnp->name, ppd.port_number);
>>>>       if (!ppdev)
>>>>           return -ENOMEM;
>>>>       ppdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>>>
>>> This breaks ethernet completely, as there is no platform driver
>>> registered for pnp->name ("ethernetX-port"), only for MV643XX_ETH_NAME.
>>
>> Looking back at our conversation, this is my fault.
>> I actually did not change this part as you asked, but I saw the
>> alloc/del issue with port 0, then added the counter and also only
>> replaced the ppd.port_number in the alloc with it. I had completely
>> forgotten at that time to replace the device name; else I would
>> have caught it back then.
>>
>> I only caught it now because I tried your patch and wondered why there
>> wasn't anything registered, not because I saw the problem by review.
>>
>
> The way I understand it, you are "manually" creating platform devices
> off the port subnodes (which, incidentally, have a compatible =
> "marvell,kirkwood-eth-port" property), but matching with the driver is
> indeed performed by device name.
> Hence Sebastian's first patch breaks everything and Jonas' latest one
> fixes it. Is that correct? Is there any more work ongoing in this area?
>
> One more question: if my understanding above is correct, what's the
> reason for NOT having an of_device_id[] table, which looks like was
> present in Florian Fainelli's first proposal [1]?

Gerlando,

for the long run, I plan to break with controller/port device
separation. I haven't looked into netdev internals, but I guess
you can have more than one netdev per platform_device.

Using one device per controller will remove some temporal dependencies
of when which driver gets loaded (there will be only one) and also the
root cause of the issue fixed by Jonas.

But it is not on my top priority list, but after fixing MAC address
obliviousness, suspend/resume and initial port setup.

> I'm also willing to help testing your present/future kirkwood patches if
> you like. Please just put me on Cc:

I once put too many people on Cc and that caused ML rejects, but if I
remember it I will keep you posted.

Sebastian

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ