[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+V-a8t-sTPAK+D5869X0_ZCdrmK0B+eRaowk9hMYwXMw09NqA@mail.gmail.com>
Date: Thu, 11 Jul 2013 22:42:57 +0530
From: Prabhakar Lad <prabhakar.csengg@...il.com>
To: Sekhar Nori <nsekhar@...com>
Cc: DLOS <davinci-linux-open-source@...ux.davincidsp.com>,
LAK <linux-arm-kernel@...ts.infradead.org>,
devicetree-discuss@...ts.ozlabs.org,
LKML <linux-kernel@...r.kernel.org>, netdev@...r.kernel.org,
"Lad, Prabhakar" <prabhakar.csengg@...il.com>
Subject: Re: [PATCH v3 0/6] ARM: davinci: da850: add ethernet driver DT support
Hi Sekhar,
On Sun, Jun 23, 2013 at 8:30 PM, Prabhakar Lad
<prabhakar.csengg@...il.com> wrote:
> From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
>
> This patch set enables Ethernet support through device tree model.
> This patch set enables mii interface only and is being tested to boot via
> rootfs. The rmii phy is present on the i2c gpio expander chip (UI board)
> for which yet support needs to be added, once the DT support for the chip
> is enabled, enabling rmii will be subsequnet patch.
>
> Changes for v2:
> 1: Enabled mdio device.
> 2: Fixed clock lookup.
>
> Changes for v3:
> 1: Fixed review comments pointed out by Sekhar.
>
> Lad, Prabhakar (6):
> ARM: davinci: da8xx: fix clock lookup for mdio device
> ARM: davinci: da850: add DT node for mdio device
> ARM: davinci: da850: add OF_DEV_AUXDATA entry for mdio.
> ARM: davinci: da850: add DT node for eth0.
> ARM: davinci: da850: add OF_DEV_AUXDATA entry for eth0.
> ARM: davinci: da850: configure system configuration chip(CFGCHIP3)
> for emac
>
gentle ping..
Regards,
--Prabhakar Lad
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists