| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1375102331-23905-16-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Mon, 29 Jul 2013 05:52:11 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Don Skidmore <donald.c.skidmore@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 15/15] ixgbe: add support for quad-port x520 adapter
From: Don Skidmore <donald.c.skidmore@...el.com>
This is a x520 based quad-port (4x10Gbps) NIC with a single QSFP+
connector. Changes were required to our identify functions due to
different eeprom address which is also included here.
Signed-off-by: Don Skidmore <donald.c.skidmore@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 147 +++++++++++++++++++-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 178 ++++++++++++++++++++++++-
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 36 +++--
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 9 ++
6 files changed, 358 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index d011d5c..a26f3fe 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1331,7 +1331,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
static struct ixgbe_phy_operations phy_ops_82598 = {
.identify = &ixgbe_identify_phy_generic,
- .identify_sfp = &ixgbe_identify_sfp_module_generic,
+ .identify_sfp = &ixgbe_identify_module_generic,
.init = &ixgbe_init_phy_ops_82598,
.reset = &ixgbe_reset_phy_generic,
.read_reg = &ixgbe_read_phy_reg_generic,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index b92765b..555d7c7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -58,6 +58,10 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg_wait_to_complete);
static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
static bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
{
@@ -219,6 +223,25 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
s32 ret_val = 0;
+ u32 esdp;
+
+ if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
+ /* Store flag indicating I2C bus access control unit. */
+ hw->phy.qsfp_shared_i2c_bus = true;
+
+ /* Initialize access to QSFP+ I2C bus */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0_DIR;
+ esdp &= ~IXGBE_ESDP_SDP1_DIR;
+ esdp &= ~IXGBE_ESDP_SDP0;
+ esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
+ esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599;
+ phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599;
+ }
/* Identify the PHY or SFP module */
ret_val = phy->ops.identify(hw);
@@ -397,6 +420,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82599_LS:
media_type = ixgbe_media_type_fiber_lco;
break;
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+ media_type = ixgbe_media_type_fiber_qsfp;
+ break;
default:
media_type = ixgbe_media_type_unknown;
break;
@@ -1942,7 +1968,7 @@ static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
goto out;
else
- status = ixgbe_identify_sfp_module_generic(hw);
+ status = ixgbe_identify_module_generic(hw);
}
/* Set PHY type none if no PHY detected */
@@ -2048,10 +2074,12 @@ sfp_check:
switch (hw->phy.type) {
case ixgbe_phy_sfp_passive_tyco:
case ixgbe_phy_sfp_passive_unknown:
+ case ixgbe_phy_qsfp_passive_unknown:
physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
break;
case ixgbe_phy_sfp_ftl_active:
case ixgbe_phy_sfp_active_unknown:
+ case ixgbe_phy_qsfp_active_unknown:
physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
break;
case ixgbe_phy_sfp_avago:
@@ -2069,6 +2097,15 @@ sfp_check:
else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
break;
+ case ixgbe_phy_qsfp_intel:
+ case ixgbe_phy_qsfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
default:
break;
}
@@ -2306,6 +2343,112 @@ reset_pipeline_out:
return ret_val;
}
+/**
+ * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ if (hw->phy.qsfp_shared_i2c_bus == true) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ usleep_range(5000, 10000);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+ if (hw->phy.qsfp_shared_i2c_bus == true) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ if (hw->phy.qsfp_shared_i2c_bus == true) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ usleep_range(5000, 10000);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+ if (hw->phy.qsfp_shared_i2c_bus == true) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
+
static struct ixgbe_mac_operations mac_ops_82599 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82599,
@@ -2370,7 +2513,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
static struct ixgbe_phy_operations phy_ops_82599 = {
.identify = &ixgbe_identify_phy_82599,
- .identify_sfp = &ixgbe_identify_sfp_module_generic,
+ .identify_sfp = &ixgbe_identify_module_generic,
.init = &ixgbe_init_phy_ops_82599,
.reset = &ixgbe_reset_phy_generic,
.read_reg = &ixgbe_read_phy_reg_generic,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 65c36f7..e606aae 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -109,6 +109,7 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_QSFP_SF_QP), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 },
@@ -208,6 +209,7 @@ static inline bool ixgbe_pcie_from_parent(struct ixgbe_hw *hw)
{
switch (hw->device_id) {
case IXGBE_DEV_ID_82599_SFP_SF_QP:
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
return true;
default:
return false;
@@ -7342,6 +7344,7 @@ static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter)
*/
switch (hw->device_id) {
case IXGBE_DEV_ID_82599_SFP_SF_QP:
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
physfns = 4;
break;
default:
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 71f554a..369eef5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -841,9 +841,35 @@ out:
}
/**
- * ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ * ixgbe_identify_module_generic - Identifies module type
* @hw: pointer to hardware structure
*
+ * Determines HW type and calls appropriate function.
+ **/
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_SFP_NOT_PRESENT;
+
+ switch (hw->mac.ops.get_media_type(hw)) {
+ case ixgbe_media_type_fiber:
+ status = ixgbe_identify_sfp_module_generic(hw);
+ break;
+ case ixgbe_media_type_fiber_qsfp:
+ status = ixgbe_identify_qsfp_module_generic(hw);
+ break;
+ default:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ * @hw: pointer to hardware structure
+*
* Searches for and identifies the SFP module and assigns appropriate PHY type.
**/
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
@@ -1122,6 +1148,156 @@ err_read_i2c_eeprom:
}
/**
+ * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the QSFP module and assigns appropriate PHY type
+ **/
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 vendor_oui = 0;
+ enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+ u8 identifier = 0;
+ u8 comp_codes_1g = 0;
+ u8 comp_codes_10g = 0;
+ u8 oui_bytes[3] = {0, 0, 0};
+ u16 enforce_sfp = 0;
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+ &identifier);
+
+ if (status != 0)
+ goto err_read_i2c_eeprom;
+
+ if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ hw->phy.id = identifier;
+
+ /* LAN ID is needed for sfp_type determination */
+ hw->mac.ops.set_lan_id(hw);
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
+ &comp_codes_10g);
+
+ if (status != 0)
+ goto err_read_i2c_eeprom;
+
+ if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
+ hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
+ } else if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE) {
+ hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_act_lmt_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_da_act_lmt_core1;
+ } else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
+ } else {
+ /* unsupported module type */
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ if (hw->phy.sfp_type != stored_sfp_type)
+ hw->phy.sfp_setup_needed = true;
+
+ /* Determine if the QSFP+ PHY is dual speed or not. */
+ hw->phy.multispeed_fiber = false;
+ if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+ ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+ hw->phy.multispeed_fiber = true;
+
+ /* Determine PHY vendor for optical modules */
+ if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
+ &oui_bytes[0]);
+
+ if (status != 0)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
+ &oui_bytes[1]);
+
+ if (status != 0)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
+ &oui_bytes[2]);
+
+ if (status != 0)
+ goto err_read_i2c_eeprom;
+
+ vendor_oui =
+ ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+ (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+ (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+ if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
+ hw->phy.type = ixgbe_phy_qsfp_intel;
+ else
+ hw->phy.type = ixgbe_phy_qsfp_unknown;
+
+ hw->mac.ops.get_device_caps(hw, &enforce_sfp);
+ if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+ /* Make sure we're a supported PHY type */
+ if (hw->phy.type == ixgbe_phy_qsfp_intel) {
+ status = 0;
+ } else {
+ if (hw->allow_unsupported_sfp == true) {
+ e_warn(hw, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n");
+ status = 0;
+ } else {
+ hw_dbg(hw,
+ "QSFP module not supported\n");
+ hw->phy.type =
+ ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+ }
+ } else {
+ status = 0;
+ }
+ }
+
+out:
+ return status;
+
+err_read_i2c_eeprom:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ hw->phy.id = 0;
+ hw->phy.type = ixgbe_phy_unknown;
+
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
* ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
* @hw: pointer to hardware structure
* @list_offset: offset to the SFP ID list
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index fe64e723..9ec13b3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -33,19 +33,25 @@
#define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2
/* EEPROM byte offsets */
-#define IXGBE_SFF_IDENTIFIER 0x0
-#define IXGBE_SFF_IDENTIFIER_SFP 0x3
-#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
-#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
-#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
-#define IXGBE_SFF_1GBE_COMP_CODES 0x6
-#define IXGBE_SFF_10GBE_COMP_CODES 0x3
-#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
-#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C
-#define IXGBE_SFF_SFF_8472_SWAP 0x5C
-#define IXGBE_SFF_SFF_8472_COMP 0x5E
-#define IXGBE_SFF_SFF_8472_OSCB 0x6E
-#define IXGBE_SFF_SFF_8472_ESCB 0x76
+#define IXGBE_SFF_IDENTIFIER 0x0
+#define IXGBE_SFF_IDENTIFIER_SFP 0x3
+#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
+#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
+#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
+#define IXGBE_SFF_1GBE_COMP_CODES 0x6
+#define IXGBE_SFF_10GBE_COMP_CODES 0x3
+#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
+#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C
+#define IXGBE_SFF_SFF_8472_SWAP 0x5C
+#define IXGBE_SFF_SFF_8472_COMP 0x5E
+#define IXGBE_SFF_SFF_8472_OSCB 0x6E
+#define IXGBE_SFF_SFF_8472_ESCB 0x76
+#define IXGBE_SFF_IDENTIFIER_QSFP_PLUS 0xD
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0 0xA5
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1 0xA6
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2 0xA7
+#define IXGBE_SFF_QSFP_10GBE_COMP 0x83
+#define IXGBE_SFF_QSFP_1GBE_COMP 0x86
/* Bitmasks */
#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4
@@ -60,6 +66,8 @@
#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
#define IXGBE_SFF_ADDRESSING_MODE 0x4
+#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
+#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
#define IXGBE_I2C_EEPROM_READ_MASK 0x100
#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
@@ -130,7 +138,9 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
u16 *firmware_version);
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw);
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw);
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
u16 *list_offset,
u16 *data_offset);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 4c91ea6..161ff18 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -69,6 +69,7 @@
#define IXGBE_DEV_ID_82599_LS 0x154F
#define IXGBE_DEV_ID_X540T 0x1528
#define IXGBE_DEV_ID_82599_SFP_SF_QP 0x154A
+#define IXGBE_DEV_ID_82599_QSFP_SF_QP 0x1558
#define IXGBE_DEV_ID_X540T1 0x1560
/* VF Device IDs */
@@ -1520,9 +1521,11 @@ enum {
#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */
#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */
#define IXGBE_ESDP_SDP0_DIR 0x00000100 /* SDP0 IO direction */
+#define IXGBE_ESDP_SDP1_DIR 0x00000200 /* SDP1 IO direction */
#define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */
#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */
#define IXGBE_ESDP_SDP0_NATIVE 0x00010000 /* SDP0 Native Function */
+#define IXGBE_ESDP_SDP1_NATIVE 0x00020000 /* SDP1 IO mode */
/* LEDCTL Bit Masks */
#define IXGBE_LED_IVRT_BASE 0x00000040
@@ -2582,6 +2585,10 @@ enum ixgbe_phy_type {
ixgbe_phy_sfp_ftl_active,
ixgbe_phy_sfp_unknown,
ixgbe_phy_sfp_intel,
+ ixgbe_phy_qsfp_passive_unknown,
+ ixgbe_phy_qsfp_active_unknown,
+ ixgbe_phy_qsfp_intel,
+ ixgbe_phy_qsfp_unknown,
ixgbe_phy_sfp_unsupported,
ixgbe_phy_generic
};
@@ -2623,6 +2630,7 @@ enum ixgbe_media_type {
ixgbe_media_type_unknown = 0,
ixgbe_media_type_fiber,
ixgbe_media_type_fiber_fixed,
+ ixgbe_media_type_fiber_qsfp,
ixgbe_media_type_fiber_lco,
ixgbe_media_type_copper,
ixgbe_media_type_backplane,
@@ -2956,6 +2964,7 @@ struct ixgbe_phy_info {
bool smart_speed_active;
bool multispeed_fiber;
bool reset_if_overtemp;
+ bool qsfp_shared_i2c_bus;
};
#include "ixgbe_mbx.h"
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists