netdev - RE: [E1000-devel] e1000e suspend-to-disk reboots box with 3.11-rc3+

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <804857E1F29AAC47BF68C404FC60A184542E21F8@ORSMSX105.amr.corp.intel.com>
Date:	Wed, 31 Jul 2013 21:13:10 +0000
From:	"Allan, Bruce W" <bruce.w.allan@...el.com>
To:	Borislav Petkov <bp@...en8.de>,
	"e1000-devel@...ts.sourceforge.net" 
	<e1000-devel@...ts.sourceforge.net>
CC:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [E1000-devel] e1000e suspend-to-disk reboots box with 3.11-rc3+

> -----Original Message-----
> From: Borislav Petkov [mailto:bp@...en8.de]
> Sent: Wednesday, July 31, 2013 1:41 PM
> To: e1000-devel@...ts.sourceforge.net
> Cc: netdev@...r.kernel.org; linux-kernel@...r.kernel.org
> Subject: [E1000-devel] e1000e suspend-to-disk reboots box with 3.11-rc3+
> 
> Hi,
> 
> I'm experiencing the strange observation that when I hibernate my x230
> with Linus HEAD from today + tip/master (3.11-rc3+), the box doesn't
> remain off but reboots immediately.
> 
> Since I have a similar bug where an e1000e box reboots
> when "Wake on LAN from S4/S5" is enabled in the BIOS
> (https://bugzilla.novell.com/show_bug.cgi?id=812592) I decided to test
> with LAN cable removed.
> 
> And yes, when the ethernet cable is not connected, the box hibernates
> and remains off. When I hibernate with the cable attached, the box
> doesn't remain off but reboots.
> 
> The card is:
> 
> [    1.620772] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [    1.622116] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
> [    1.623687] e1000e 0000:00:19.0: setting latency timer to 64
> [    1.625160] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to
> dynamic conservative mode
> [    1.626640] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [    1.884432] e1000e 0000:00:19.0 eth0: registered PHC clock
> [    1.885925] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
> 3c:97:0e:6b:ef:e7
> [    1.887466] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
> Connection
> [    1.889089] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-
> 0FF
> 
> And of course, 3.10 is fine.
> 
> Any ideas?
> 
> I'll try to bisect it when I get a chance.
> 
> --
> Regards/Gruss,
>     Boris.

Off the top of my head, I cannot think of anything that has been added to the driver in
Linus' tree since 3.10 that would cause this change in behavior.  There are a number of
changes that have been put into the out-of-tree driver which have not yet made it into
Linus' tree - would you be willing to try the latest out-of-tree driver from e1000.sf.net
to see if it resolves your issue?  Of course, a bisect as you mention would also help.

Have you checked for a BIOS update from your system manufacturer?
Do you have Runtime Power Management enabled for this device?

Thanks,
Bruce.

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html