| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <281c8acebaaaa5ed93d0575e74f3667a6a791309.1375438720.git.himanshu.madhani@qlogic.com>
Date: Fri, 2 Aug 2013 00:57:39 -0400
From: Himanshu Madhani <himanshu.madhani@...gic.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <Dept_NX_Linux_NIC_Driver@...gic.com>,
Jitendra Kalsaria <jitendra.kalsaria@...gic.com>,
<himanshu.madhani@...gic.com>
Subject: [PATCH net-next v3 1/5] qlcnic: Enhance diagnostic loopback error codes.
From: Jitendra Kalsaria <jitendra.kalsaria@...gic.com>
o Enhanced the driver to use standard Linux error codes
o Return a unique error code to indicate loopback is in progress
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@...gic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@...gic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 6 ------
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 23 +++++++++++++++-------
.../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 6 +++---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 6 +++---
4 files changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index b00cf56..aa0e68e 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -950,12 +950,6 @@ struct qlcnic_ipaddr {
#define QLCNIC_READD_AGE 20
#define QLCNIC_LB_MAX_FILTERS 64
#define QLCNIC_LB_BUCKET_SIZE 32
-
-/* QLCNIC Driver Error Code */
-#define QLCNIC_FW_NOT_RESPOND 51
-#define QLCNIC_TEST_IN_PROGRESS 52
-#define QLCNIC_UNDEFINED_ERROR 53
-#define QLCNIC_LB_CABLE_NOT_CONN 54
#define QLCNIC_ILB_MAX_RCV_LOOP 10
struct qlcnic_filter {
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 0913c62..cda188d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -1652,7 +1652,7 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode)
if (ahw->op_mode == QLCNIC_NON_PRIV_FUNC) {
netdev_warn(netdev,
"Loopback test not supported in non privileged mode\n");
- return ret;
+ return -ENOTSUPP;
}
if (test_bit(__QLCNIC_RESETTING, &adapter->state)) {
@@ -1686,13 +1686,13 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode)
if (test_bit(__QLCNIC_RESETTING, &adapter->state)) {
netdev_info(netdev,
"Device is resetting, free LB test resources\n");
- ret = -EIO;
+ ret = -EBUSY;
goto free_diag_res;
}
if (loop++ > QLC_83XX_LB_WAIT_COUNT) {
netdev_info(netdev,
"Firmware didn't sent link up event to loopback request\n");
- ret = -QLCNIC_FW_NOT_RESPOND;
+ ret = -ETIMEDOUT;
qlcnic_83xx_clear_lb_mode(adapter, mode);
goto free_diag_res;
}
@@ -1729,6 +1729,15 @@ int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode)
return status;
config = ahw->port_config;
+
+ /* Check if port is already in loopback mode */
+ if ((config & QLC_83XX_CFG_LOOPBACK_HSS) ||
+ (config & QLC_83XX_CFG_LOOPBACK_EXT)) {
+ netdev_err(netdev,
+ "Port already in Loopback mode.\n");
+ return -EINPROGRESS;
+ }
+
set_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
if (mode == QLCNIC_ILB_MODE)
@@ -1756,14 +1765,14 @@ int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode)
netdev_info(netdev,
"Device is resetting, free LB test resources\n");
clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
- return -EIO;
+ return -EBUSY;
}
if (loop++ > QLC_83XX_LB_WAIT_COUNT) {
netdev_err(netdev,
"Did not receive IDC completion AEN\n");
clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
qlcnic_83xx_clear_lb_mode(adapter, mode);
- return -EIO;
+ return -ETIMEDOUT;
}
} while (test_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status));
@@ -1805,14 +1814,14 @@ int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *adapter, u8 mode)
netdev_info(netdev,
"Device is resetting, free LB test resources\n");
clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
- return -EIO;
+ return -EBUSY;
}
if (loop++ > QLC_83XX_LB_WAIT_COUNT) {
netdev_err(netdev,
"Did not receive IDC completion AEN\n");
clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
- return -EIO;
+ return -ETIMEDOUT;
}
} while (test_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status));
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 700a463..94a728d 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -980,9 +980,9 @@ int qlcnic_loopback_test(struct net_device *netdev, u8 mode)
msleep(500);
qlcnic_process_rcv_ring_diag(sds_ring);
if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) {
- netdev_info(netdev, "firmware didnt respond to loopback"
- " configure request\n");
- ret = -QLCNIC_FW_NOT_RESPOND;
+ netdev_info(netdev,
+ "Firmware didn't sent link up event to loopback request\n");
+ ret = -ETIMEDOUT;
goto free_res;
} else if (adapter->ahw->diag_cnt) {
ret = adapter->ahw->diag_cnt;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index d3f8797..1994b44 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -919,17 +919,17 @@ static void qlcnic_handle_fw_message(int desc_cnt, int index,
break;
case 1:
dev_info(dev, "loopback already in progress\n");
- adapter->ahw->diag_cnt = -QLCNIC_TEST_IN_PROGRESS;
+ adapter->ahw->diag_cnt = -EINPROGRESS;
break;
case 2:
dev_info(dev, "loopback cable is not connected\n");
- adapter->ahw->diag_cnt = -QLCNIC_LB_CABLE_NOT_CONN;
+ adapter->ahw->diag_cnt = -ENODEV;
break;
default:
dev_info(dev,
"loopback configure request failed, err %x\n",
ret);
- adapter->ahw->diag_cnt = -QLCNIC_UNDEFINED_ERROR;
+ adapter->ahw->diag_cnt = -EIO;
break;
}
break;
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists